swipe BT9513 TWS Airpod Bluetooth Earbuds User Manual
- June 5, 2024
- swipe
Table of Contents
Wireless Earbuds Manual
Power ON/OFF
Press the “On/Off” button on the back of the case, a blue light will turn on. To turn the case off press the button again, and the blue light will turn off.
To Charge the earbuds
Return the earbuds to the case. Use the lighting cable supplied and plug it into the USB plug. A red light will flash to show the case is charging. Once the charge is complete the red light will remain on.
To use the earbuds
Open the top cover of the charging case and remove the earbuds. Both earbuds
will automatically power on and red and blue light will flash on the earbuds.
Once both earbuds are paired successfully, the right earbud will flash with a
blue and red light. The left earbuds will not flash once paired with the right
earbud.
To pair the earbuds with your wireless device: open your device’s wireless
functions setting and search EARCB. Select EARCB and pair it with your
wireless device. Once connect a voice will say ‘CONNECTED’ through the earbuds
and the light will stop flashing on the earbuds.
Your earbuds are now successfully connected and ready to use.
To power off your earbuds, simply place the earbuds back into the case and the
earbuds will automatically disconnect from your wireless device. The earbuds
will automatically power off when not connected to a wireless device for 5
minutes.
Touch Functions
Answer Telephone calls
When a call is received, touch the earbud once and the call will be answered.
To end the call touch the earbud once and the call will end. To reject a
telephone call, touch the earbud for 3 seconds and the call will be rejected.
Play and Pause Music
Touch either earbud once to start and pause the music
Next song
Touch the Right earbud 2 consecutive times to move to the next song
Previous song
Touch the LEFT earbud 2 consecutive times to move to the previous song
Volume increase
Touch the Right earbud for 2 seconds to increase the volume, a beeping noise
will confirm the volume increase.
Volume Decrease
Touch the LEFT earbud for 2 seconds to decrease the volume, a beeping noise
will confirm the volume decrease.
PRODUCT NAME: Cracker Barrell TWS Manual
ARTWORK TYPE:| PRODUCT
MANUAL| PACKAGING
LABELS
MATERIAL: 350gsm
FINISH: Matt Laminate
CUTTER GUIDE REF: W 210mm x H 220mm
PRODUCT CODE: TWSEARCB
BARCODE: xxx
TYPE: EAN 13, 80%
CMYK ****
| PANTONE COLOURS
Black|
CREASE
** SPOT UV
**
| CUTTER
**INK FREE
---|---|---|---
FONTS:|
---|---
| WHERE| WHAT
1. **| Product Title| MONTSERRAT REG
2.| General Text| MONTSERRAT LIGHT
3.| TU Details| HELVETICA
4.| Warnings| HELVETICA
IMAGES:
XXXXXXX.ai
XXXXXXX.ai
XXXXXXX.ai
XXXXXXX.ai
XXXXXXX.ai
XXXXXXX.ai
XXXXXXX.ai
NOTES:
VERSION DATE:
DATE DESIGNER
12/10/2020 CHLOE ROWLEY
PLEASE ENSURE ALL FONTS ARE OUTLINED AND IMAGES EMBEDDED BEFORE RELEASING ARTWORK TO FACTORIES
Troubleshooting
Earbuds not powering on
Return earbuds to chase and use a lighting cable to charge.
Low battery
A ‘dingdong’ noise will sound in the earbuds.
Earbuds not connecting
Return both earbuds back to the case and press the ON/OFF button on the case
to reset the earbuds.
Battery for charging case: 502030, 3.7V/250mAh.
Battery for earbuds: 400909, 3.7V/25mAh.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment. This
device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation.
Designed in London by Magnum Brands Group Ltd. Ruislip. flA4 OEJ. UK O
www.magnumbrands.com
EWE Images and Illustrations may Mar hem actual product.
FCC ID: 2AXUXTWSEARCB