DELTA DORE TYBOX 1127 Programmable Thermostat User Guide
- May 15, 2024
- DELTA DORE
Table of Contents
DELTA DORE TYBOX 1127 Programmable Thermostat
Product Specifications
- Power Supply: 230V
- Dimensions: 80 x 104 x 35 mm
- Input Voltage: 230 V~ +/-10%, 50 Hz
- Max Current: 2 A
- IP Rating: IP30
Product Description
The TYBOX 1127 is a programmable thermostat with the following features:
- Programmable for 7 days or 1 day
- Program profile display
- Current set-point temperature display
- Comfort, Economy, and Frost Protection modes
Product Usage Instructions
Date and Time Setting
To set the date and time:
- Turn the knob to the Date and Time setting mode.
- Use the + or – buttons to set the date and time.
- Press OK to confirm and move to the next setting.
- To exit the mode, turn the knob.
Temperature Setting
To set the temperature:
- Turn the knob to the Temperature setting mode.
- Adjust the temperature using the + or – buttons.
- Press OK to confirm and move to the next setting (Comfort -> Economy -> Frost Protection).
- To exit the mode, turn the knob.
Programming
Quick Programming
To perform quick programming:
- Turn the knob to PROG.
- Select the pre-programming option by pressing + or -.
- Press OK to confirm the selection.
- To exit the mode, turn the knob.
Frequently Asked Questions (FAQ)
-
How do I change the programmed settings?
You can change the programmed settings by navigating to the specific setting using the knob and adjusting it using the + or – buttons. Press OK to confirm the changes. -
Can I override the programmed settings temporarily?
Yes, you can manually override the programmed settings by adjusting the temperature or mode as needed. The thermostat will revert to the programmed settings at the next scheduled program change.
TYBOX 1127
Quick start guide
Installation
- A or 1 day
- B programming
Circulator control
Thermostat input control
Description
- C Selector knob
- D Program profile
- E Temperature
- F Day (1=Mon)
- G Time
- H Current set-point
- I Information
- Shutdown mode
- Absence mode
- Manual mode
- AUTO
- Date and time settings
- PROG Programming
- Adjusting temperature settings
- Comfort
- Economy
- Frost Protection
Date and time
- Turn the knob to .
- ❷->⓫ Set the date, then the time with + or -, then confirm with OK and move on to the next setting. ⓬ To exit the mode, turn the knob.
Set point settings
- ❶ Turn the knob to .
- ❷->❼ Set the temperature with + or -, then confirm with OK and move on to the next setting (Comfort -> Economy -> Frost Protection). ❽ To exit the mode, turn the knob.
Programming
Quick programming
- ❶ Turn the knob to PROG. ❷ Select the pre-programming to apply (see table) by repeatedly pressing + or -.
- ❸ Press OK to confirm.
- ❹ To exit the mode, turn the knob.
Customising a program
- You can change the program profile applied to a day (P1 to P5), depending on your needs.
- ❶ Turn the knob to PROG.
- ❷ Press + or – to select the program to modify.
- Press OK to confi rm (❸).
- ❹ Press OK to select the day to modify.
- ❺ Create your program by pressing on for Economy periods, and on for Comfort periods.
- Press OK to confirm (❻).
- ❼ To exit the mode, turn the knob
More information
For detailed instructions: scan the QR code.
- Setup menus (e.g. optimisation, temp. correction, settings, etc.),
- Advanced settings and functions,
- Use (program copying),
- Help…
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>