SHARP HT-SBW800 5.1.2ch Dolby Atmos Home Theatre System with Wireless Subwoofer User Manual

: June 6, 2024
: Sharp

Sharp

SHARP HT-SBW800 5.1.2ch Dolby Atmos Home Theatre System with Wireless

Subwoofer

SHARP HT-SBW800 5.1.2ch Dolby Atmos Home Theatre System with Wireless
Subwoofer

Trademarks:

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG,. Inc.

The terms HDMI, HDMI High-Defi nition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.

Dolby, Dolby Atmos, and the double-D symbol are registered trademarks of Dolby Laboratories Licensing Corporation. Manufactured under license from Dolby Laboratories. Confi dential unpublished works. Copyright © 2012-2020 Dolby Laboratories. All rights reserved.

Important safety instructions

Please, read these safety instructions and respect the following warnings before the appliance is operated:

The lightning fl ash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of suffi cient magnitude as to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
Use only power supply listed in the user manual.
This symbol means that the product should be disposed of in an environmentally friendly manner and not with general household waste.
AC voltage
DC voltage
Class II equipment

In order to prevent fi re always keep candles and other open fl ames away from this product.

Warning:

Always follow basic safety precautions when using this applience, espe-cially when children are present.
Children should be supervised to ensure that they do not play with the appliance.
Do not damage the power cord, neither do not place any heavy objects on it, do not stretch it or bend it. Also do not attach extension cables. Damage to the power cord may occur fi re or electric shock.
If the supply cord is damaged, it must be replaced by the manufacturer, a service agent or similarly qualifi ed persons in order to avoid a hazard.
Ensure that the unit is plugged into an AC 220-240V 50Hz power outlet. Using higher voltage may cause the unit to malfunction or even fi re catching.
If the power plug does not fi t into your outlet, do not force the plug into an electrical socket if it does not fi t.
Turn off the unit before unplugging it from power source to completely switch it off .
Do not disconnect or connect the power cord with wet hands. It may cause an electric shock.
Disconnect the power cord if it is not used for a long time.
Ensure that the mains plug is always easily accessible.
This product does not contain any parts that are serviceable by the user. In case of a fault, contact the manufacturer or authorised service department. Exposing the internal parts inside the device may endanger your life. The manufacturers guarantee does not extend to faults caused by repairs carried out by unauthorised third parties.
Do not use this product immediately after unpacking. Wait until it warms up to room temperature before using it.
Ensure this product is used in moderate climates only (not in tropical/subtropical climates).
Place product on a fl at, stable surface that is not subject to vibrations.
Ensure the product and its parts is not overhanging the edge of the supporting furniture.
To reduce the risk of ﬁre, electric shock or damage to this product, do not expose it to direct sunlight, dust, rain and moisture. Never expose it to dripping or splashing and do not place objects ﬁlled with liquids on or near the product.
Do not place objects fi lled with liquids, such as vases, on the apparatus.
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifi ers) that produce heat.
Do not place the product where the humidity is high and ventilation is poor.
Ensure a minimum distance of 5 cm around the apparatus for suffi cient ventilation. Do not block any ventilation openings of this product. Always ensure that the ventilation openings are not covered with items such as newspapers, table-cloths, curtains, etc.
NEVER let anyone, especially children, push anything into holes, slots or any other openings in the unit’s casing as this could result in a fatal electric shock.
Storms are dangerous for all electric appliances. If the mains or aerial wiring is struck by lightning, the appliance might get damaged, even if it is turned off . You should disconnect all the cables and connectors of the appliance before a storm.

Maintenance

Unplug the power cable from the power source before cleaning the appliance.
Use a soft and clean rag to clean the outside of the unit. Never clean it with chemicals or detergent.

Power Adapter

To disconnect the unit from the mains supply, unplug the lead from the mains socket.
Only use the supplied mains adaptor as failure to do this may result in a safety risk and/or damage to the unit.

Batteries

Observe the correct polarity when inserting the batteries.
Do not expose batteries to high temperatures and do not place them on locations where the tempera- ture might increase quickly, e.g. near the fi re or on the direct sunshine.
Do not expose batteries to excessive radiant heat, do not throw them into the fi re, do not disassemble them and do not try to recharge un-rechargeable batteries. They could leak or explode.
Never use diff erent batteries together or mix new and old ones.
When the Remote Control is not to be used for a long time (more than a month), remove the battery from the Remote Control to prevent it from leaking.
If the batteries leak, wipe away the leakage inside the battery compart-ment and replace the batteries with new ones.
Do not use any batteries other than those specied.
Do not ingest battery, chemical burn hazard
If the battery is swallowed, it can cause severe internal burns in just 2 hours and lead to death. Keep new and used batteries away from children. If the battery compartment does not close securely, stop using the product and keep it away from children. If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.

Disposal of this equipment and Batteries

Do not dispose of this product or its batteries as unsorted municipal waste. Return it to a designated collection point for the recycling of WEEE in accordance with local law. By doing so, you will help to conserve resources and protect the environment.
Most of the EU countries regulate the disposal of batteries by law. Contact your retailer or local authorities for more information.
The shown above appears on electrical and electronivcal equipment and batteries (or the packaging) to remind users of this. If “Hg” or ‘Pb’ appears below the symbol, this mean that the battery contains traces of mercury (Hg) or lead (Pb), respectively.
Users are requested to use existing return facilities for used equipment and batteries.

CE Statement:

Hereby, Sharp Consumer Electronics Poland sp. z o.o. declares that this audio device is in compliance with the essential requirements and other relevant provisions of RED Directive 2014/53/EU. The full text of the EU declaration of conformity is available by following the link www. sharp consumer.eu and then entering download section of your model and choosing “CE Statements”.

What’s in the Box

Main Unit
Remote Control
Wireless Subwoofer
EU AC Power Cord (2 pcs)
UK AC Power Cord (2 pcs)
Power Adapter
Audio Cable 3.5mm to 3.5mm
HDMI Cable
Wall Brackets (2pcs)
Wall mounting Screws
User manual
Quick Start Guide
Warranty leafl et
2 x AAA battery

Design and specifications are subject to change without notice.

Panels & Controls

SHARP HT Dolby Atmos Home Theatre System with Wireless
Subwoofer 4

Main Unit

Display Window – Show the current status.
Remote Control Sensor – Receive signal from the remote control.
Wall bracket screws
(ON/OFF) button – Switch the unit between ON and Standby mode.
(SOURCE) button – Select the play function.
VOL+/VOL- buttons – Increase/decrease the volume level.
DC IN 23V Socket – Connect to adapter.
COAXIAL Socket
OPTICAL Socket
USB Socket – Insert the USB device to play music.
AUX Socket – Connect to an external audio device.
HDMI (1/2/ARC) Sockets – Connect to a TV via HDMI cable.

Wireless Subwoofer

AC~ Socket – Connect to power.
PAIR button – Press activate the pairing function between the main unit and the subwoofer.
PAIR Indicator – Light up solidly when the pairing succeed.

Remote Control

Switch the unit between ON and STANDBY mode.
Select the Bluetooth mode.
Press and hold to activate the pairing function in Bluetooth mode or disconnect the existing paired Bluetooth device.
Select the play function.
SURR – Turn the surround ON/OFF.
HDMI – Select the HDMI 1/2/ARC mode.
VOL +/- – Increase/decrease the volume level.
Skip to previous/next track in Bluetooth/USB mode.
Play/pause/resume playback in Bluetooth/USB mode.
(MUTE) Mute or resume the sound.
BASS +/- – Adjust bass level.
TRE +/- – Adjust treble level.
EQ – Select a preset sound mode.

Preparations

Prepare the Remote Control
The provided Remote Control allows the unit to be operated from a distance.

Even if the Remote Control is operated within the eff ective range of 6m, remote control operation may be impossible if there are any obstacles between the unit and the remote control.
If the Remote Control is operated near other products which generate infrared rays, or if other remote control devices using infra-red rays are used near the unit, it may operate incorrectly. Conversely, the other products may operate incorrectly.

Replace the Remote Control Battery

Press and slide the back cover to open the battery compartment of the remote control.
Insert two AAA size batteries (included). Make sure the (+) and (–) ends of the batteries match the (+) and (–) ends indicated in the battery compartment.
Close the battery compartment cover.

Placement and Mounting

Placement

A If your TV is placed on a table, you can place the unit on the table
directly in front of the TV stand, centered with the TV screen.
B If your TV is attached to a wall, you can mount the unit on the wall directly below the TV screen.
Wall Mounting (if using Option-B• Installation must be carried out by qualifi ed personnel only. Incorrect assembly can result in severe personal injury and property damage (if you intend to install this product yourself, you must check for installa-tions such as electrical wiring and plumbing that may be buried inside the wall). It is the installer’s responsibility to verify that the wall will safely support the total load of the unit and wall brackets.
Additional tools (not included) are required for the installation.
Do not overtighten screws.
Keep this instruction manual for future reference.
Use an electronic stud fi nder to check the wall type before drilling and mounting.)

Drill 4 parallel holes (Ø 5.5-6 mm each according to wall type) in the wall. The distance between the holes should be 1121 mm.
Firmly fi x 1 dowel into each hole in the wall if necessary. Tighten the wall mount brackets on the wall with screws and screwdriver (not included). Make sure that they are securely installed.
Remove the screws at the back of the unit. Install the wall mounting screws into the back of the unit.
Lift the unit onto the wall mount brackets and slot into place.

Connections

Dolby Atmos®
Dolby Atmos gives you amazing experience you have never heard before by overhead sound, and all the richness, clarity, and power of Dolby sound.
For using Dolby Atmos®
Dolby Atmos® is available only in HDMI mode. For the details of the connection, please refer to “HDMI Connection”.

To use Dolby Atmos® in HDMI 1 / HDMI 2 / HDMI ARC mode, your TV has to support Dolby Atmos®.
Make sure that “No Encoding“ is selected for bitstream in the digital audio output of the connected external device (e.g. Blu-ray DVD player, TV etc.). For Sharp TV brands please select “RAW” or “Auto” option in the digital output menu.
While entering Dolby Atmos / Dolby Digital / PCM format, the soundbar will show DOLBY ATMOS / DOLBY AUDIO / PCM AUDIO.
While the soundbar is using Dolby Atmos audio, you can only adjust the bass level of the subwoofer.

NOTE: The full Dolby Atmos experience is only available when the Soundbar is connected to the source via a HDMI 2.0 cable. The Soundbar will still function when connected via other methods (such as a Digital Optical cable) but these are unable to support all of the Dolby features. Given this, our recommendation is to connect via HDMI, in order to ensure full Dolby support.

HDMI Connection

Some 4K HDR TVs require the HDMI input or picture settings to be set for HDR content reception. For further setup details on HDR display, please refer to the instruction manual of your TV. Using HDMI to connect the soundbar, AV equipment and TV:

Method 1: ARC (Audio Return Channel)
The ARC (Audio Return Channel) function allows you to send audio from your ARC- compliant TV to your soundbar through a single HDMI connection. To enjoy the ARC function, please ensure your TV is both HDMI-CEC and ARC compliant and set up accordingly. When correctly set up, you can use your TV remote control to adjust the volume output (VOL +/- and MUTE) of the soundbar.
Connect the HDMI cable (included) from unit’s HDMI (ARC) socket
to the HDMI (ARC) socket on your ARC compliant TV. Then press the remote control to select HDMI ARC.
Tips:
- Your TV must support the HDMI-CEC and ARC function. HDMI-CEC and ARC must be set to On.
- The setting method of HDMI-CEC and ARC may di˝ er depending on the TV. For details about ARC function, please refer to the owner’s manual.
Method 2: Standard HDMI:
If your TV is not HDMI ARC-compliant, connect your soundbar to the TV through a standard HDMI connection.
- Use an HDMI cable (included) to connect the soundbar’s HDMI OUT socket to the TV’s HDMI IN socket.
- Use an HDMI cable (included) to connect the soundbar’s HDMI IN (1 or 2) socket to your external devices (e.g. games consoles, DVD players and blu ray).

Use the OPTICAL Socket

Remove the protective cap of the OPTICAL socket, then connect an OPTICAL cable (not included) to the TV’s OPTICAL OUT socket and the OPTICAL socket on the unit.

Use the COAXIAL Socket

You also can use the COAXIAL cable (not included) to connect the TV’s COAXIAL OUT socket and COAXIAL socket on the unit.
TIP: The unit may not be able to decode all digital audio formats from the input source. In this case, the unit will mute. This is NOT a defect. Ensure that the audio setting of the input source (e.g. TV, game console, DVD player, etc.) is set to proper option (Refer to the user manual of the input source device for its audio setting details) with HDMI/HDMI ARC/OPTICAL/COAXIAL input.

Use the AUX Socket

Use an RCA to 3.5mm audio cable (not included) to connect the TV’s audio output sockets to the AUX socket on the unit.
Use a 3.5mm to 3.5mm audio cable (included) to connect the TV’s or external audio device headphone socket to the AUX socket on the unit.

Connect Power

Risk of product damage!

Ensure that the power supply voltage corresponds to the voltage printed on the back or the underside of the unit.
Before connecting the AC power cord, ensure you have completed all other connections.

Soundbar

Unwind the mains adapter and mains cable to their full length.
Connect power cord to the power adapter, then connect power adapter to the DC IN 23V socket of the unit and as last step connect it into a mains socket.

Subwoofer

Connect the mains cable to the AC~ Socket of the Subwoofer and then into a mains socket.

Pairing the Wireless Subwoofer with the Main Unit

Automatic pairing
The subwoofer and soundbar will pair automatically when both are plugged into the mains supply. Connection is wireless, so there is no need for any cables to connect the two units.

When the subwoofer is pairing with the main unit, the Pair Indicator will ° ash quickly.
When the subwoofer is paired with the main unit, the Pair Indicator will light up.

NOTE:

Only press the Pair button on the rear of the Subwoofer if pairing manually.
If the automatic pairing fails, pair the subwoofer with the main unit manually.

Manual pairing

Ensure that all the cables are well connected and the main unit is in Standby mode.
Press and hold the Pair button on the rear of the subwoofer for a few seconds. The subwoofer will enter the pairing mode and the Pair Indicator will blink quickly.
Press the button on the main unit or on the remote control to switch the main unit on.
When the subwoofer and soundbar have paired, the Pair indicator will illuminate.
If the Pair indicator blinks, the wireless connection has failed. Unplug the cable of the subwoofer and then reconnect the main cable after 4 minutes. Repeat step 1 ~ 4.

NOTE:

If the wireless connection fails again, check if there is con° ict or strong interference (for example, interference from an electronic device) around your location. Remove these con° icts or strong interferences and repeat the above procedures.
The subwoofer should be within 5m of the soundbar in an open area.
If the main unit is not connected with the subwoofer and it is in On mode, the POWER Indicator will ° ash. Follow step 1 ~ 4 above to pair the subwoofer to the main unit.

Basic Operation

Standby/ON
When you ÿ first connect the main unit to the mains socket, the main unit will be in Standby mode.

Press the button on the unit or on the remote control to switch the unit ON.
Press the button again to switch the unit back to STANDBY mode.
Disconnect the mains plug from the mains socket if you want to switch the unit OFF completely.
- If a TV or an external device is connected, the unit will switch on auto-matically when the TV or the external device is switched on.
- When there is no input signal from the unit in over 15 minutes, then it will automatically switch to Standby mode.

Select Modes
Press the button repeatedly on the unit or the / HDMI / buttons on the remote control to select the AUX, OPTICAL, COAXIAL, HDMI 1, HDMI 2, HDMI ARC, USB and BT (Bluetooth) mode. The selected mode will show on the display.

Adjust the Bass / Treble

Press the BASS+/- button on the remote control to adjust bass level.
Press the TREBLE+/- button on the remote control to adjust treble level.

Turn the Surround Sound ON/OFF

Press the SURROUND button on the remote control to turn on the surround sound. Press this button again to turn o˝ the surround sound.

Adjust the Volume

Press the VOL+ / VOL- buttons on the unit or on the remote control to adjust the volume.
If you wish to turn the sound o˝ , press the button on the remote control. Press the button again or press the VOL+ / VOL- buttons on the unit or on the remote control to resume normal listening.

Select Equaliser (EQ) Eﬀect

While playing, press the EQ button on the remote control to select between preset equalisers: Movie (recommended for viewing movies), Music (recommended for listening to music), News (recommended for listening to News), Night (recommended for listening at night).

AUX / OPTICAL / COAXIAL / HDMI / HDMI ARC Operation

Ensure that the unit is connected to the TV or audio device.
Press the button repeatedly on the unit or the / HDMI buttons on the remote control to select the AUX, OPTICAL, COAXIAL, HDMI 1, HDMI 2, HDMI ARC mode.
Operate your audio device directly for playback features.
Press the VOL +/– button to adjust the volume to your desired level.

TIP:

The unit may not be able to decode all digital audio formats from the input source. In this case, the unit will mute. This is NOT a defect. Ensure that the audio setting of the input source (e.g. TV, game console, DVD player, etc.) is set to PCM or Dolby Digital (Refer to the user manual of the input source device for its audio setting details) with HDMI 1 /HDMI 2 / HDMI ARC / OPTICAl / COAXIAL input.
When the DOLBY DIGITAL audio format is being used, the Soundbar display shows DOLBY AUDIO.
When the PCM audio format is being used, the Soundbar display shows PCM AUDIO.
When being used non-PCM or DOLBY DIGITAL audio formats, if there’s no sound output from the unit and the display show NO SUPPORT.

Bluetooth Operation

Pair Bluetooth-enabled Devices
The ÿ rst time you connect your bluetooth device to this player, you need to pair your device to this player.
NOTE:

The operational range between this player and a Bluetooth device is approximately 8 meters (without any object between the Bluetooth device and the unit).
Before you connect a Bluetooth device to this unit, ensure you know the device’s capabilities.
Compatibility with all Bluetooth devices is not guaranteed.
Any obstacle between this unit and a Bluetooth device can reduce the operational range.
If the signal strength is weak, your Bluetooth receiver may disconnect, but it will re-enter pairing mode automatically.

During ON mode, press the button repeatedly on the unit or the button on the remote control to select Bluetooth mode. “NO BT” will show on the display if the unit is not paired to any Bluetooth device.
Activate your Bluetooth device and select the search mode. “SHARP HT-SBW800” will appear on your Bluetooth device list.
- If you cannot ÿ nd the unit, press and hold the button on the remote control to be searchable. The display will show “PAIR” and you will hear “Pairing” from the unit.
Select “SHARP HT-SBW800” in the pairing list. After successful pairing, you will hear “Paired” from the unit, and the display panel shows “BT”.
Play music from the connected Bluetooth device.
To disconnect the Bluetooth function, you can:
- Switch to another function on the unit.
- Disable the function from your Bluetooth device.The Bluetooth device will be disconnected from the unit after the “Disconnected” voice prompt.
- Press and hold the button on the remote control.

TIPS:

Enter “0000” for the password if necessary.
If no other Bluetooth device pairs with this player within two minutes, the player will recover its previous connection.
The player will also be disconnected when your device is moved beyond the operational range.
If you want to reconnect your device to this player, place it within the operational range.
If the device is moved beyond the operational range, when it is brought back, please check if the device is still connected to the player.
If the connection is lost, follow the instructions above to pair your device to the player again.

Listen to Music from Bluetooth Device

If the connected Bluetooth device supports Advanced Audio Distribution Proÿ le (A2DP), you can listen to the music stored on the device through the player.
If the device also supports Audio Video Remote Control Proÿ le (AVRCP), you can use the player’s remote control to play music stored on the device.

Pair your device with the player.
Play music via your device (if it supports A2DP).
Use supplied remote control to control play (if it supports AVRCP).
- To pause/resume play, press the button on the remote control or on the unit.
- To skip to a track, press the / buttons on the remote control.

NOTE:

The maximum USB memory size is 32GB.
MP3 format is supported.

USB Operation

Insert the USB device.
Press the button repeatedly on the unit or press the button on the remote control to select USB mode.
During playback:
- To pause or resume play, press the button on the remote control.
- To skip to the previous/next ÿ le, press the / buttons on the remote control.

TIPS:

USB devices up to 32GB are supported.
Only MP3 ÿ les can be played back.

Troubleshooting

No power

Ensure that the AC cord of the soundbar and subwoofer are correctly connected.
Ensure that there is power at the AC outlet.
Press (standby) button to turn the unit on.

Remote control does not work

Before you press any playback control button, ÿ rst select the correct source.
Reduce the distance between the remote control and the unit.
Insert the battery with its polarities (+/-) aligned as indicated.
Replace the battery.
Aim the remote control directly at the sensor on the front of the unit. No sound
Make sure that the unit is not muted. Press MUTE or VOL+/VOL– button to resume normal listening.
Press button on the unit or on the remote control to switch the soundbar to standby mode. Then press the button again to switch the soundbar on.
Unplug both the soundbar and the subwoofer from the mains socket, then plug them again. Switch on the soundbar.
The unit may not be able to decode all digital audio formats from the input source. In this case, the unit will mute. This is NOT a defect. Ensure the audio setting of the input source (e.g. TV, game console, DVD player, etc.) is set to bitstream while using digital (e.g. HDMI, OPTICAL, COAXIAL) connection. For Sharp TV brands please select “RAW” or “Auto” option in the digital output menu.
The subwoofer is out of range, please move the subwoofer closer to the soundbar. Make sure the subwoofer is within 5 m of the soundbar (the closer the better).
The soundbar may have lost connection with the subwoofer. Re-pair the units by following the steps on the section “Pairing the Wireless Subwoofer with the Soundbar”.

TV has display problem while viewing HDR content from HDMI source.

Some 4K HDR TVs require the HDMI input or picture settings to be set for HDR content reception. For further setup details on HDR display, please
refer to the instruction manual of your TV.

I can’t fi nd the Bluetooth name of this unit on my Bluetooth device for Bluetooth pairing

Ensure the Bluetooth function is activated on your Bluetooth device.
Ensure you have paired the unit with your Bluetooth device.

This is a 15 mins power oﬀ function(ERPII standard requirement for saving power).

When the unit’s external input signal level is too low, the unit will be turned o˝ automatically in 15 minutes. Please increase the volume level of your external device.

The subwoofer is idle or the indicator of subwoofer does not light up.