Editors Keys Slimline 2.4ghz Wireless Keyboard User Manual
- June 5, 2024
- Editors Keys
Table of Contents
Editors Keys Slimline 2.4ghz Wireless Keyboard
Slimline 2.4ghz Wireless Keyboard
Thank you for choosing Editors Keys for your new shortcut editing keyboard.
This keyboard will speed up your editing process and it will change the way
you work forever.
We’ve made this short guide to help you set up your new keyboard as fast as
possible.
Setup Instructions
- Remove the battery cover on the back of the keyboard.
- Inside you’ll find the handy 2.4Ghz dongle, plug this into a spare USB port on your computer. This dongle enables your computer and keyboard to instantly pair without any set up procedure.
- Insert two AAA sized batteries.
- Flick the switch on the back of the keyboard to the ‘on’ position.
- Replace the battery cover and begin to type. The keyboard is now ready to use.
Notes:
- When the batteries are low, the red LED indicator light will begin to flash.
- Keep the keyboard away from extreme heat or cold, as well as any flammable items or damp places. Also avoid dropping, hitting or throw the products.
- Dispose of batteries according to local regulations. Don’t dispose as household waste.
- You may use rechargeable AAA batteries . (we recommend this to help protect the environment.)
Specifications
- Frequency Range : 2.4GHZ
- Transmission Range: 33ft
- Operation Voltage:3.0VDC
- Operation Current: 3.0mA
- Battery type: 2 X AAA batteries (not included)
- Temperature use range: 0-45 C / 32 to 11 OF
- Dimension: 444x 124 x 17 mm
FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) This device must accept any interference
received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates
uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television receptio
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
RF warning statement
The device has been evaluated to meet general RE exposure requirement. The
device can be used in portable exposure condition without restriction.
For more help, visit us online at: www.editorskeys.com Follow us on Twitter: @editorskeys