waterpik WP-662 Ultra Professional Water Flosser User Guide
- June 16, 2024
- Waterpik
Table of Contents
waterpik WP-662 Ultra Professional Water Flosser
Unit Prep
- A. Fill the reservoir with warm water and replace it firmly on the base.
- B. Insert tip until it clicks into place.
- C. Turn pressure to high, point the tip into the sink, and turn the power and water switches ON until water flows. Turn switches OFF.
Water Floss
- A. Start on low pressure and increase to your liking. Turn the power ON.
- B. Turn the water ON. Close lips enough to prevent splashing, while still allowing water to flow from mouth into the sink.
- C. Aim water at the gumline at a 90-degree angle. Follow the gumline and pause briefly between teeth.
TO AVOID MESS: KEEP TIP IN MOUTH WHILE UNIT IS ON
This device is only compatible with voltages of 120 VAC, 60
©2017 Water Pik, Inc.
Register your product and receive over $50 in savings.
waterpik.com/registration Visit
waterpik.com/HowTo660 to watch How To Video
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>