Darkwalker FO204W Switch Pro HD Controller User Manual

Darkwalker FO204W Switch Pro HD Controller

Pair with Your Switch Console

• Step 1: Go to System Settings-Controllers and Sensors-Change Grip/Order.
• Step 2: Hold Y button and press HOME button. The 4 indicators flash in turn. Wait for a few seconds the controller will be paired with your console.

Amiibo
This controller includes almost 99% Amiibo features. If you have any new amiibo bins feel free to send to us and we will add to the controller.

Amiibo User Guide

1. Enable the Amiibo function in game setting.
2. Check the PDF list via the QR code or our website: www.amiijoy.com to find out the[Amiiba]you want to use. And the corresponding [RGB light calar], [LED indicator numbar] and [Buttan].

For example in the picture:
Find out the Amiibo(Ganondorf of Zelda), The corresponding RB light color is red, LED indicator is 4, Button is D-Pad Up.

1. Hold T button and press – button to change the RGB light color to match corresponding game.
2. Hold T button and press + button to adjust the LED Indicator so that the LED Indicator that match the Amiibo is on.
3. Hold T button and press the Button that match the Amiibo you want to use. RBG light flashes for 3 times and then turns on. LED Indicator keeps flashing. The Amiibo data is ready.
4. Go to the Amiibo use interface. The console requests you to place the Amiibo on the Pro controller. No need to do it and the console will read the Amiibo data automatically. (The use method and condition are different for different games).

Note

1. If the RGB light does not flash for 3 times or LED indicator does not flash, please proceed with the c) step again
2. Hold T button and press – button to change the RGB to light blue or turn off. To turn off the Amiibo data.

Reconnect
Hold HOME button to reconnect to your Switch console.

Power
Hold the HOME button for more than 10 seconds the controller to power off the controller.

Reset
If the controller is unable to connect to your console. Please press the reset button (a small hole) on the back of the controller to reset the controller.

Turbo

• Hold T button and press – button to change the GB light to light blue or turn off.
• Press T and X/Y/A/B/L/R/ZL/ZR/L3/R3 to activate Turbo function. Press again the same combine buttons to clear Turbo function.

Parameter

• Working Voltage: 3.7V
• Battery Capacity: 600mAh
• Input Voltage: 5V
• Low Voltage Alarm: <3.7V
• Pairing Time: ≤ 10s
• Reconnect Time: < 5s
• Charging: 4 LED lights flash
• Fully charged: 4 LED lights off

www.amijoy.com
Email:leunaproduct@hotmail.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>