DELTA DORE 6300036 Tysense Thermo RF Outdoor Sensor Instruction Manual
- June 10, 2024
- DELTA DORE
Table of Contents
DELTA DORE 6300036 Tysense Thermo RF Outdoor Sensor
Product Information
Tysense Thermo
- Power supply: Lithium 3.6 V – 2.6Ah (10 years autonomy) R6/AA
- Frequency: 868.7 MHz to 869.2 MHz
- Maximum wireless power: < 10 mW
- Category 2 receiver
Important Note: To install the Tysense Thermo, please refer to the following instructions:
- Place the manager in awaiting for association (ON button should be pressed for >2s)
- Press the OK button to confirm association.
- To use the product with the Tydom application, press the + button for >2s and open the Tydom application.
The Tysense Thermo is compatible with installations RT 2012 and RE 2020. For more information, please visit www.deltadore.com.
Technical specifications
- Alimentation :
- Lithium 3,6 V – 2,6Ah (10 years autonomy) R6 / AA
- Operating temperature : -10°C / +70°C
- IP 43
- H 92 x L 78 x P 42 mm
- X3D wireless remote control device:
- 868.7 MHz to 869.2 MHz.
- Maximum wireless power < 10 mW
- Category 2 receiver
Installation
Installations RT 2012 – Association
- Place the manager in awaiting for association
- Check on the manager that the association is successful
Installations RE 2020 – Association
Pairing with the Tydom app (Requires a Tywell Pro on the installation).
Go to your installation’s «Settings» page, select > Add a device > Sensor >
Tysense Thermo, then follow the instructions.
View the history of outdoor temperatures with energy consumption
Pairing with the Tydom app .
Go to your installation’s «Settings» page, select > Add a device > Consumption
Tysense Thermo, then follow the instructions.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>