JOYO 266-BANTA Atomic Ban Tamp Series Mini Amp Head User Manual
- June 14, 2024
- JOYO
Table of Contents
| User Manual
Safety instructions
Thank you for purchasing our products!
Important safety instructions
| CAUTION|
---|---|---
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE.
The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’ s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product.
This symbol is intended to alert the user— Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
User instructions: After you turn on the banTamP, the tube warms up for the first 20-30 seconds, the unstable sound during this period is normal.
Detailed safety instructions
- For your safety and let you be familiar with this product, please read all the safety and operation instructions before use.
- Please keep this user manual for future use and maintenance.
- Please follow all the safety instructions on the product or in the user manual.
- Use the attached power adapter only. If use other power adapter, it will damage the internal circuits or increase noise.
- Keep it away from children!
- Please install this product according to manufacturer’ s instructions. Put it in places that have good ventilation and heat dissipation. Don’ t block any ventilation openings nor cover it with cloth and the like.
- Don’ t use it near water or damp areas, don’ t drop water or other liquid substance into this product;
- Don’ t use it near heat sources, such as heater, electrothermal oven, high power amplifier and more.
- Don’ t put hazardous chemicals on the product, inflammable and explosive substances such as alcohol, thinner and so on.
- Do not use alcohol or other cleaning fluids to clean this product, otherwise it will damage the surface, use a clean dry cloth when necessary.
- Don’ t damage the power cord or plug. Don’ t pull the power cord and other parts. Please unplug it if you need to move this product.
- Please turn off the power switch and unplug the AC power socket during thunderstorm, lightning or if it is not in use for a long time.
- Should any of the following occur, please switch it off and unplug it and contact your local distributor or have it repaired by qualified personnel.
- Metal or other solid object or liquid falls into the cabinet, or gets caught in the rain.
- The power cord or power plug were damaged, cable core are exposed or wire break.
- The product is in smoke, peculiar smell or other abnormal condition.
- The product falls on the ground or malfunctions.
Panel instruction
Front panel
1.Head’s Model: Model vs Sound Characteristics
|
MODERN HI-GAIN
---|---
|
BLUES OVERDRIVE
|
BRITISH CLASSIC ROCK
|
MODERN HI-GAIN
|
BRITISH HI-GAIN
|
AMERICAN HARDROCK
|
BRITISH CRUNCH
2.Cuitar Input.
3.Channel Switch: for choosing the channel.
4.Bluetooth Switch: turn on/off banTamP’s Bluetooth function.
5.Gain Knob: adjust the amp’s distortion.
6.Tone Knob: adjust the amp’s tone brightness.
7.Volume Knob: adjust the amp’s volume.
8.Power/Bluetooth indicator: turn on banTamP, the indicator becomes red,
then turn on Bluetooth switch, the indicator changes from red to blue.
9.Power Switch: turn on/off banTamP.
Rear panel
10.Bluetooth Antenna
11.Speaker Output: please connect with speaker impedance that is 8Ω or
more than 8Ω ! Important notes: when connected with speaker impedance that is
more than 8Ω, banTamP’ s power will be reduced.
12.Power Interface: connects to DC 18V/2.0A power adapter for power
supply, make sure to use the attached power adapter.
13.Headphone Output: the amp becomes mute when it connects to headphones.
14.FX LOOP: connects effect pedal input to banTamP’ s SEND jack, and
connects effect pedal output to banTamP’ s RETURN jack.
Connection
Bluetooth connection
( 1 )Turn on the Bluetooth slide switch.
( 2 )Its power indicator changes from red to blue.
( 3 )Switch on the Bluetooth of your equipment, wait for it to locate banTamP. Please note that the names located are according to different models you have bought, the names are on the upper side of banTamP’ s input jack as shown in the picture, for example, “ZOMBIE”.
( 4 )Click the related device and match.
Cabinet impedance matching
The matched speaker impedance is 8 Ω of course, 16 Ω works too, but banTamP achieves maximum power output only when speaker impedance is 8 Ω. While with 16 Ω , banTamP’s power reduces.
Please don’ t connect with speaker impedance that is less than 8Ω!
Specifications:
Power adapter: INPUT AC 100-240V 50/60Hz OUTPUT DC18V/2.0A
Rated power: 20W/8Ω
Speaker Impedance: 8Ω
Bluetooth version: 4.0
Speaker impedance: Standard 32Ω Minimum 16Ω
Dimension: 163mm X 110mm X 140mm
Weight: 1200g
Package content:
banTamP x1
Power adapter x1
User manual x1
Coble x1
Power cord x1
JOYO TECHNOLOGY CO., LTD
Address: 2/F, Lushi Industry Building, 28th District, Bao’an, Shenzhen, 518101
China.
www.joyo-amps.com Email:
info@joyoaudio.com Tel: 0086-755-29755381
JOYO Technology is committed to guarantee the highest quality standards. All Technical Parameters or pictures are only for your information, subject to the actual products.