4MODERNHOME T107 Gold Tripod Table Lamp Set Instruction Manual
- October 30, 2023
- 4MODERNHOME
Table of Contents
4MODERNHOME T107 Gold Tripod Table Lamp Set
Product Information
- Product Name: T107
- Components
- A Tube x 3
- B Lamp Socket x 1
- C Shade x 1
- D Locking Ring x 1
Product Usage Instructions
- Unpack all parts from cartons carefully.
- Carefully pull-out excess power cord from the lamp base while assembling to prevent the cord from becoming twisted.
- Tighten the tubes(A) into the lamp socket(B) until tight.
- Place the shade(C) onto the lamp socket(B).
- Tighten the locking ring(D) into the lamp socket(B) until tight.
Assembly & Installation Instructions
Dear Customer
Thank you for your business! If you have any questions or problems, please
send us an email at support@4modernhome.com
or call us at 870-949-8466. We will do everything possible to make you
completely satisfied with your purchase. Product reviews help future customers
to make their purchase decision. You are encouraged to share your experience
by leaving a short product review on the platform where you bought this
product. Thank you! Zgear Team.
Warning: If any special control devices are used with this fixture,
follow the instructions carefully to assure full compliance with N.E.C.
requirements. If there are any questions, contact a qualified electrical
contractor.
Warning: California Residents Proposition 65 This product contains lead,
a chemical known to the state of California to cause cancer and birth defects
or other reproductive harm. Do not place the product in your mouth. Wash your
hands after handling this product.
Caution: It is highly recommended to get an electrician to install this
light. Please make sure to turn the electricity off at the main circuit
breaker before beginning installation. All glass is fragile. Use care when
handling glass component(s) and/or lamp(s).
OVERVIEW
- Unpack all parts from cartons carefully.
- Carefully pull-out excess power cord from the lamp base while assembling to prevent the cord from becoming twisted.
- Tighten the tubes(A)into the lamp socket(B)until tight.
- Place the shade(C)onto the lamp socket(B).
- Tighten the locking ring(D)into the lamp socket(B)until tight.
WIRE CONNECTION DIAGRAM
Wires meeting safety standards are required to connect the electrical circuit.
CAUTION: Risk of fire
Please read all instructions carefully. Before you proceed to install, make sure that the power supply is turned off and remains off until installation is completed.
PARTS INCLUDED
Code Part description QTY
- A: Tube 3
- B: Lamp socket 1
- C: Shade 1
- D: Locking ring 1
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>