DELTA DORE 6700116 Tydom Home Hub User Guide

DELTA DORE 6700116 Tydom Home Hub

Tydom Home – Smart Home Hub
The Tydom Home is a smart home hub designed to connect and control various smart devices in your home. It provides a centralized platform for managing your smart home ecosystem. With the Tydom app, you can control and monitor your connected devices remotely using your smartphone or tablet. The hub supports both Wi-Fi and Ethernet connectivity options, ensuring reliable and seamless communication with your devices.

Product Specifications:

• Power Supply: AC adapter Ktec: KSAS0050500100VED or SPC: ZZU1001-10050-2E
• AC Values : 100-240V~ 50/60 Hz, 0.18A
• DC: 5V 1A
• X3D Transmission Frequency: 868.7 MHz to 879.2 MHz
• Zigbee Transmission Frequency: 2.4 GHz to 2.4835 GHz
• Maximum Wireless Power: < 10mW
• Maximum Consumption (without USB connection): 0.9W
• IP Rating: IP30
• Dimensions: 100 x 100 x 26 mm

Box Contents:

• Tydom Home Hub
• Ethernet Cable
• Mains Power Supply
• Important Product Information

Installation:

1. Connect your Tydom Home by strictly following this order:
2. Connect the Ethernet cable (B) to your router.
3. Connect the mains power (C) to the Tydom Home.
4. Download the Tydom app:
   • Log in to either the Google Play or App Store, depending on your device.
   • Search for and download the free Tydom app.
5. Activate Wi-Fi connection:
   • On your smartphone or tablet, enable Wi-Fi and connect to the same local network as your Tydom Home.
6. Configure the Tydom app:
   • Note the last 6 characters of your Tydom Home’s MAC address (e.g., MAC: 001A25xxxxxx).
   • Log in to the Tydom app and follow the instructions provided.

System Status LED:

• Flashing White: System accessible locally and remotely, user connected
• Steady White: System accessible locally and remotely
• Flashing Orange: System accessible locally, user connected
• Steady Orange: System accessible locally
• Steady Red: No IP address allocated

Advanced Functions:
The Tydom Home offers advanced functions that can be accessed by pressing the button on the back of the hub for different durations:

• Press >3 seconds: Secure connection and viewing connection status
• Press >15 seconds: Change from static IP to DHCP
• Press >30 seconds: Reset to factory settings

The connection quality of the product may be affected by different modifications of the IP architecture on which it operates.

• These modifications can be, but are not limited to, a change of hardware, a software update or configuration, work conducted on your operator’s equipment or any other multimedia equipment such as tablets, smartphones, etc.
• IOS is a Cisco trademark or registered trademark in the United States and in other countries, and is used under licence. AndroidTM and Google Play are Google LLC registered trademarks.
• Wi-FiTM is a trademark registered by Wi-Fi Alliance. Because of changes in standards and equipment, the characteristics given in the text and the illustrations in this document are not binding unless confirmed.

Presentation

Box contents

• A. Tydom Home
• B. Ethernet cable
• C. Mains supply
• D. Important Product Information

Description

• E. System status display LED
• F. Ethernet port
• G. Mains power socket
• H: Configuration/Information button

Installation

1. Connect your Tydom Home by STRICTLY following this order:

2. connect the Ethernet cable (B).

3.  then, connect the mains power (C).

4. Download the Tydom app.

   • Log in to either the Google Play or App Store, depending on your device.
   • Search for and download the free Tydom app.
     Activate the Wi-Fi connection on your smartphone or tablet, and connect to the same local network as your Tydom Home.

5. Configure the Tydom app.

   • Note the last 6 characters of your Tydom Home’s MAC address.
   • Log in to the app and follow the instructions.

Technical specifications

|

• Power supply via AC adapter
• Ktec: KSAS0050500100VED or SPC: ZZU1001-10050-2E AC values: 100-240V~ 50/60 Hz, 0,18A
• DC: 5V  1A
• Only these adapters should be used with the Tydom Home.

---|---
| X3D transmission frequency: 868.7 MHz to 879.2 MHz Maximum wireless power < 10mW – Category 2 receiver Zigbee transmission frequency: 2.4 GHz to 2.4835 GHz
| Maximum consumption (without USB connection): 0.9 W
| -20°C / +70°C
| -10°C / +40°C
| IP 30
| 100 x 100 x 26 mm

Help

connected
Steady white| System accessible locally and remotely
Flashing orange| System accessible locally, user connected
Steady Orange| System accessible locally
Steady Red| No IP address allocated

Advanced functions

Below are the functions accessible depending on how long the button on the back of your Tydom Home is pressed.

A Secure connection and viewing connection status
Briefly press the button. LED displays for 10 seconds.

on the router
Flashing red| No network connection Check the Ethernet link

B Change from static IP to DHCP
Press the button for 3 seconds until the pink LED flashes slowly. Release.

C Reset to factory settings
Press the button for 30 seconds until the LED stops flashing. Release.

• System status
  • DHCP mode
  • Clear product associations

www.deltadore.com

References

• Delta Dore : Solutions domotiques pour une Maison connectée

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>