DELTA DORE TYBOX 1117 Programmable Thermostat User Guide
- June 17, 2024
- DELTA DORE
Table of Contents
DELTA DORE TYBOX 1117 Programmable Thermostat
Product Specifications
- Power Supply: 230V
- Battery: 2 x 1.5V LR03 – AAA Alkaline
- Max Current: 2A
- Dimensions: 80 x 104 x 35 mm
- IP Rating: IP30
| Feature | Specification |
|---|---|
| Power Supply | 2 x 1.5V LR03 – AAA Alkaline |
| Insulation | Class II |
| Contact Output | 2 A max., 230V~ (Type 1.C) |
| Automatic Action | Type 1.C |
| Dimensions | 80 x 104 x 35 mm |
| Protection Index | IP 30 |
| Storage Temperature | -10°C / +70°C |
| Operating Temperature | -10°C / +40°C |
| Ball Pressure Test | 75°C (Housing), 100°C (Terminal) |
| Assigned Voltage | 2500V |
Product Usage Instructions
Installation
Ensure the following during installation:
- Power supply should be connected to 230V
- Keep a distance of at least 1.50 meters from other devices
- Maintain a clearance of more than 20 cm around the device
Installation Process
The thermostat must be mounted on an enclosure box in a thermally
representative area of the room to be regulated, about 1.5 meters above the
floor and away from any heat sources (windows, doors…). To avoid measurements
being influenced by drafts, it is necessary to block the arrival of wires
inside the enclosure box (with mastic, wool, etc.).
IMPORTANT: Do not install the thermostat on an exterior wall or with an unheated room behind it (e.g., garage).
- Cut off the power supply to the installation.
- Separate the base from the stand.
- Connect and fix the base. Your Tybox should be connected with flexible or rigid cables of maximum 1.5 mm² section.
- Insert the batteries. ATTENTION: Be sure to respect the battery orientation and type (not Lithium batteries).
- Switch the programming type: weekly (A) or daily (B).
- Close and lock the housing.
- Restore the power supply to the installation.
Description
The product features a programmable system with options for daily or weekly
programming. It includes settings for comfort, economy, and frost protection.
Date and Time Setting
To set the date and time:
- Turn the knob to the specified setting position.
- Adjust the date and time using the + or – buttons.
- Confirm the settings by pressing OK.
- Proceed to the next setting as needed.
- To exit the mode, turn the knob to the desired position.
Temperature Setting
To set the temperature:
- Turn the knob to the temperature setting position.
- Adjust the temperature using the + or – buttons.
- Confirm the temperature by pressing OK.
- Move to the next setting (Comfort -> Economy -> Frost Protection) accordingly.
- To exit the mode, turn the knob to the desired position.
Configuring Your Device (Menu 1)
- Turn the knob to the ‘i’ symbol, then press the ‘i’ button for 5 seconds.
- Press button 1 to modify different settings, press + or – buttons, then press OK to confirm and move to the next setting.
- To exit the mode, turn the knob.
Configuring Your Device (Menu 2)
- Turn the knob to the ‘i’ symbol, then press the ‘i’ button for 5 seconds.
- Press button 2 to modify different settings, press + or – buttons, then press OK to confirm and move to the next setting.
- To exit the mode, turn the knob.
Programming
To perform quick programming:
- Turn the knob to PROG.
- Select the pre-programming option by pressing + or -.
- Confirm the selection by pressing OK.
- To exit the mode, turn the knob to another setting.
More Information
For detailed web instructions, scan the QR code. The instructions include setup menus (e.g., optimization, temperature correction), advanced settings and functions, use (program copying), and help.
Utilization
Description
Illustration of the thermostat display and buttons with the following
labels:
- A: Adjustment knob
- B: Program profile
- C: Temperature
- D: Day (1=Monday)
- E: Time
- F: Current set-point
- G: Information
- H: Low batteries
- I: Maintenance required for the boiler (less than 30 days)
Automatic Mode (AUTO)
Turn the knob to AUTO. Your thermostat follows the program.
Temporary Override
In AUTO mode, the override allows you to switch from Comfort to Economy (or
vice versa) until the next program change.
Manual Mode
This mode allows you to choose a permanent set temperature (between 5°C and
30°C). This setting may be limited (menu 2-01 = 1). To exit this mode, turn
the knob.
Anticipation Function
In AUTO mode, when switching from Economy to Comfort, the thermostat will
anticipate the temperature rise so that it reaches the programmed Comfort
temperature (menu 1-03 = 1).
Help
Changing the Batteries
The low battery symbol will appear. You have about 1 month to change them
(2 alkaline 1.5V LR03 AAA batteries). Be sure to respect the orientation and
type of batteries (not Lithium).
Frequently Asked Questions (FAQ)
Q: How do I change the batteries in the device?
A: To change batteries, follow these steps:
- Open the battery compartment.
- Remove the old batteries.
- Insert new batteries according to polarity markings.
- Close the compartment securely.
Why does the thermostat turn on although the programming does not demand it?
The thermostat uses a type of regulation that anticipates the inertia of temperature variations to calculate energy needs more accurately and provide maximum comfort. As a result, the heating can turn on even if the set temperature is not yet reached.
Why does the thermostat display Confort?
You have activated the Comfort temperature regulation by your radiator (menu 1-08).
Why does the thermostat display the frost symbol?
The date of the next boiler maintenance is approaching (less than 30 days). To find out the number of days remaining before maintenance, press the information button several times (see Information Button).
What is the Delta Dore Tybox 1117 used for?
The Tybox 1117 is a programmable thermostat used for regulating indoor temperature, offering features such as weekly or daily programming, automatic mode, manual mode, and a temporary override function.
How can I program the Delta Dore Tybox 1117?
You can program the Tybox 1117 by selecting one of the pre-programmed profiles (P1 to P5) or customizing the program for each day according to your needs.
What should I do if the low battery symbol appears?
When the low battery symbol appears, you have approximately one month to replace the batteries with 2 alkaline 1.5V LR03 AAA batteries, ensuring to respect the polarity.
Where can I find more detailed information or instructions for the Tybox 1117?
Detailed information and instructions are available online by scanning the QR code provided in the user manual or visiting the Delta Dore website at www.deltadore.com.