n-FAB TSN22CC-TX 2022-23 Trail Slider Instruction Manual
- June 13, 2024
- n-FAB
Table of Contents
n-FAB TSN22CC-TX 2022-23 Trail Slider
Components and Hardware: HWKT-00031X
1. Driver side rail…………………………………………………………………………….(1)
2. Passenger side rail……………………………………………………………………..(1)
3. M8 Flanged hex nut…………………………………………………………………….(12)
4. M8 flat washer…………………………………………………………………………(12)
Tools for Installation
- 13mm socket
- Ratchet wrench
INSTALL
Step 1. Remove any OE step/running boards from the vehicle and discard.
Step 2. Clean any undercoating or debris from the threaded studs.
Step 3. Next, place (#1) Driver side on the studs and secure with
supplied (#3,#4) M8 flanged hex nut and M8 flat washer and loosely tighten for
now.
Step 4. After final adjustment fully tighten (x3) brackets to the factory
body mounts to (15-20 ft/lbs torque).
NOTE: Insure Trail Slider is pushed up against the lower shoulder of the
body, under the mounting studs before completely tighten.
Step 5. Repeat process with passenger side Slider
CUSTOMER SERVICE
N-FAB® TECHNICAL SUPPORT
PHONE: M-F 8am – 5pm EST 1-800-449-6649
| EMAIL: techsupport@n-fab.com
FOR WARRANTY INFORMATION VISIT: WWW.N-FAB.COM
References
- Fab | A Digital Asset Marketplace for Content Creators
- N-Fab Steps, Running Boards & Accessories | RealTruck
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>