PawHut D00-190V00 Pet Stroller Instruction Manual

PawHut D00-190V00 Pet Stroller

IMPORTANT
RETAIN FOR FUTURE REFERENCE: READ CAREFULLY

WARNING: Keep Away From Fire

1. Please read this instruction carefully before use and keep it properly for future reference.
2. If you do not follow this instruction, the safety of pets may be affected.
3. Do not leave the caregiver while the product is in use.
4. Do not use accessories not provided by the manufacturer.
5. Any load attached to the handle will affect the stability of the pet stroller.
6. Ensure that all the locking devices are assembled before using the pet stroller.
7. pets must use restraints when using.
8. Do not use the pet stroller in rough areas, near stoves and other dangerous areas.
9. Avoid use or storage in damp, cold or high-temperature environments and keep away from fire or strong heat sources.
10. Do not use it to put dangerous animals that are aggressive and destructive.

Maintenance and Care

Please check and maintain the pet stroller frequently. The cloth cover cannot be dipped and washed. When the cloth cover is cleaned, please use a brush and other cleaning instruments to clean the dirt.

Parts

Directions for use

1. Unfolding frame
   Take out the frame, hold the handlebar with both hands and lift it until a click is heard which means the frame is fully open.

2. Unfolding pet carrier
   Take out the pet carrier, press the bottom plate with one hand, and pull the belt on the iron support with the other hand in the direction of the arrow 45 degrees until the iron support on both sides is completely stuck into the slot. Reverse operation to fold it.

3. Installing pet carrier
   First, glue the velcro at the front end of the basket to the bottom fabric of the frame, and then fasten the buckle of the bottom fabric of the basket around the frame tube. Reverse operation to fold it.

4. Usage of front wheels
   Insert the front wheel set into the front wheel seat, it is installed when hearing “Click”. Press the buckle on the front wheel seat with your hand and pull it down, then the front wheel set is removed.

5. Usage of rear wheel
   Install: In the break state, Align the flat form of the wheel axle with the rear wheel locking direction and insert it in parallel until you hear a click. When you need to disassemble, press and hold the rear wheel quick-release button and pull it out at the same time.

6. Folding frame
   In the braking state, take out the carrier, first lift the two sides of the folding keys hold the handle to press hang so the brake can be folded, and finally

7. Press down the brakes on both conversely. team be released.

8. For pet safety belts

9. Lift by hand

If you have any questions, please contact our customer care centre.
Our contact details are below 001-877-644-9366
customerservice@aosom.com
Imported by Aosom LLC
27150 SW Kinsman Rd Wilsonville, OR 97070 USA
MADE IN CHINA

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>