Ideal Standard Essential Pneumatic Dual Flush Concealed Cistern Instructions
- June 13, 2024
- Ideal Standard
Table of Contents
Cistern Outlet Valve Maintenance Procedure
The cistern outlet valve should be checked and
the seal cleaned periodically
Essential Pneumatic Dual Flush Concealed Cistern
-
Turn off the water supply to the cistern and flush.
-
Close toilet seat and lid.
-
Remove cistern lid.
-
Remove valve body by gripping and turning anti-clockwise to unlock.
Apply downward pressure whilst turning valve, (to prevent clips breaking). Lifting the valve body exposes the valve seal, A B. -
Inspect and clean valve seal.
-
If necessary replace valve seal by removing the retaining clip and removing the retaining clip and inserting screwdriver down centre hole as shown,C D.
-
Check condition of seal face, remove any obstruction.
-
Refitting the valve is reversal of removal, taking care to locate the tabs of the valve body into the lugs of the valve seat, E F.
-
Re-fit cistern tid and turn on the water.
e-fill cistern, test flush and sealing. -
Quote reference SV01967 to purchase a replacement seal.
Waterproof sealant MUST NOT BE USED to seal, as this will have a detrimental effect on all submerged rubber seais.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>