LYRIDZ 80LED Motion Sensor Under Cabinet Lighting Instruction Manual

LYRIDZ CabinetLight3 Instruction Manual

Please retain this document for future reference

Installation Method

1. Clean the installation position
2. Stick the loop side to the hook side, and tear off the protective film on the back of the loop side.
3. Stick the cabinet light somewhere by pushing firmly for at least 1 minute

Notice: Once the hook side and loop side re attached, ot remove it Otherwise, itis vt sack konihe wall.

Specification

Important Safety Information

To ensure correct and safe installation, function of the product, please follow below instructions and keep this booklet for future reference.

• Do not use light around water. Avoid liquids on al electrical parts.
• Clean only with a dry, soft cloth. Household cleaners or Solvents can damage your light.
• Do not nstall your light near any heat sources, such as radiators, heat registers, stoves, or any other apparalus that produces heal.
• Do not block any ventilation openings
• To reduce the sk of fire or eleciric shock, do not expose ths light to rain or moisture.
• Keep packaging materials(e.g.plastic bags)out of chidren’s reach
• Not suitable for children under 36 months. Small parts has choking hazard,
• Do not stare at the operating light source.

Getto Know Your LYRIDZ

Light Button
Press once to switch between 5 preset color temperature.
Long press to switch brightness steplessly.
Four Modes

• OFF : Always light off
• ON : Always light up
• 24H-AUTO: Detects motion to turn on all day. Last about 30secs.
• Night-AUTO: Detects motion o turn on in dark enough condition.
  Last about 30secs.

Charge the Cabinet Light

Tip: When the battery is low, the cabinet light will flash.

FCC Information

This device complies with Part 15 of the FCC Rules. Operation is subject o the following two_condiions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received.including interference that may cause undesired operation.Note: This equipment has been tested and found o comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not instalied and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular_installation.
If this equipment does cause harmful interference to radio or television reception. which can be determined by tuming the equipment off and on, the user is encouraged 1o try to correct the interference by one of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Warning:
Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user authority to operate the equipment.
This LYRIDZ smart cabinet light is fully compliant with the EU, CA,JP, UK and USAlegislation. When disposing this equipment, please help protect our environment by means of proper disposal. Your local authorities will have special return and disposal facilities available for you.

CAN ICES-3(B)NMB-3(B)
Madein China – Model: AS137
Linkfar Healthcare GmbHNiederrheinstrake
71, 40474 Dusseldorf Germany
Sea&Mew Accounting Ltd
10 Duke Street, Coventry CV5 8BZ Customer Service
12-montnimited warranty
life time technical support
support@lyridz.com

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>