Tech-1 26-3077444 Slim Wireless Charging Pad User Manual

Tech-1 26-3077444 Slim Wireless Charging Pad

COMPATIBILITY

Works with Qi-compatible wireless charging phones. Confirm that your phone is Qi-compatible before charging.

INSTRUCTIONS

• Connect the charger’s USB cable to a 5V-2A USB wall charger (sold separately) or other USB charging source to enable wireless charging. The red LED light will illuminate when plugged in.
• Place your Qi-enabled device in the center of the charging plate.
• The blue light will illuminate when charging.

Note: Very thick protective cases can obstruct charging. For effective charging it may be necessary to reposition the phone or remove the case.

SPECIFICATIONS

• Model: 26-3077444
• Input: DCSV-2A
• Output: DCSV-1A (MAX)
• Transmission Power: 5W
• Charging Efficiency: <65%

CAUTION

To prevent damage to the phone or the charger

• Remove metal cases, or cases with any magnet metal components, from the phone before charging.
• Do not place metal objects on the charger during charging.
• Qi wireless chargeable phones with metallic-looking finishes will charge normally.

TIPS AND PRECAUTIONS

• Read all the instructions before using the product, and use the product as intended.
• Keep close supervision of this product if being used around children.
• Do not expose to rain or moisture, and do use near water such a swimming pools, bathtubs, or sinks.
• Do not expose to heat sources, the sun, or leave in a hot vehicle.
• Do not place metal items on the surface of the product.
• Do not modify or try to use fora non-intended purpose.
• Do not cover the product with paper or other materials. Use in a well-ventilated area when charging
• Wireless chargers generate heat when charging, and the charger may temporarily stop charging if it gets too hot.
• Do not use if damaged or modified.
• Do not dissemble. There are no serviceable parts inside.
• Do not place magnetic strip cards or similar megntically sensitive items between the phone and the charger. Wireless charging uses magnetic induction that could damage these items.
• Consider tuning off your phone’s vibrating notifications during chargin9, as vibrations may cause your phone to shift position on the charger and stop charging.
• Multiple Qi devices cannot be charged at the same time.
• Your phone will not charge wirelessly if it is connected to to your computer’s USB port, or if it’s connected to a USB power adapter or other USB charging source.

FCC COMPLIANCE

This device complies with Part 15 of the FCC. Operation is subject to the following two conditions:

1. this device may not cause harmful interference.
2. this device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

_ WARNING: _Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

RF EXPOSURE STATEMENT

This device complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be coÿlocated or operating in conjunction with any other antenna or transmitter. During the operation of device a distance of 15 cm surrounding the device and 20 cm above the top surface of the device must be respected.

WHAT’S INSIDE

• Wireless Charging Pad with USB cable
• User Manual

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>