Nedis KAIC100FWT Ice Cube Maker User Manual
- June 5, 2024
- nedis
Table of Contents
KAIC100FWT Ice Cube Maker
User Manual
Preface
Thank you for purchasing the Nedis KAIC100FWT.
This document is the user manual and contains all the information for correct, efficient and safe use of the product.
This user manual is addressed to the end user. Read this information carefully before installing or using the product.
Always store this information with the product for use in the future.
Product description
Intended use
The Nedis KAIC100FWT is an ice cube maker that can make 9 ice cubes per 8 minutes.
The product is intended for indoor use only.
The product is not intended for professional use.
This product can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the product in a safe way and understand the hazards involved. Children shall not play with the product. Cleaning and user maintenance shall not be done by children without supervision.
The product is intended for use in household environments for typical housekeeping functions that may also be used by non-expert users for typical housekeeping functions, such as: shops, offices other similar working environments, farm houses, by clients in hotels, motels and other residential type environments and/or in bed and breakfast type environments.
Any modification of the product may have consequences for safety, warranty and proper functioning.
Specifications
Product
|
Ice Cube Maker
---|---
Article number
|
KAIC100FWT
Dimensions (l x w x h)
|
224 x 283 x 308 mm
Input voltage
|
220 – 240 VAC ; 50 Hz
Power input
|
120 W
Water reservoir capacity
|
1.5 L
Ice basket capacity
|
1.5 L / 850g
Refrigerant
|
R600a
Max. daily ice output
|
12 kg / 24 h
Main parts (image A)
A
1. Top cover
2. Lid
3. Evaporator
4. Water tray
5. Water reservoir
6. ‘MAX’ indicator
7. Control panel
8. ‘Ice full’ indicator
9. ‘Add water’ indicator
10. ‘Ice making’ indicator
11. Power button
12. Power cable
13. Air outlet
14. Ice basket
Safety instructions
WARNING
|
Contains one or more (extremely/highly) flammable components.
---|---
|
Contains one or more (extremely/highly) flammable components.
---|---
- Ensure you have fully read and understood the instructions in this document before you install or use the product. Keep the packaging and this document for future reference.
- Only use the product as described in this document.
- This product can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the product in a safe way and understand the hazards involved. Children shall not play with the product. Cleaning and user maintenance shall not be done by children without supervision.
- Close supervision is necessary when the product is used by or near children, animals or infirm persons. Do not allow children to play with it or touch it.
- Keep the product out of reach from children.
- Do not use the product if a part is damaged or defective. Replace a damaged or defective product immediately.
- If the product is immersed in water, do not touch the product or the water.
- Shut off the main power grid and carefully remove the plug from the power outlet.
- After the product has been immersed or covered in water or other liquids, do not use the product again.
- Keep the product away from heat sources. Do not place the product on hot surfaces or near open flames.
- Do not use the product near explosive or flammable materials.
- Do not spray the product with chemicals, acids, gasoline or oil.
- Do not drop the product and avoid bumping.
- Do not insert any objects into the product.
- Do not cover ventilation openings.
- Before cleaning or moving, switch off the product and disconnect the power.
- Do not pull the power cable to move the product.
- Unplug the product from the power outlet and other equipment if problems occur.
- Switch off the main power supply before unplugging the power cable.
- Do not use the product when the cable or plug is damaged.
- Make sure that the electrical supply in your area matches a voltage of 220 – 240 VAC and a frequency of 50 Hz.
- Plug into a grounded outlet only.
- Fully extend the power cable and make sure the power cable does not contact the product.
- Do not use external timers or remote control systems to switch the product on or off.
- Do not unplug the product by pulling on the cable. Always grasp the plug and pull.
- Ensure people do not trip over the cable.
- Make sure that the power cable cannot become entangled and does not hang over the edge of a worktop.
- Do not leave the product unattended when switched on.
- R600a is a refrigerant gas that complies with the European directives on the environment.
- Be aware that refrigerants can be odorless.
- Place the product in an area without any continuous sources of ignition (for example: open flames, gas or electrical appliances in operation).
- Only store the product in a well-ventilated area.
- When the product is installed, operated or stored in a non-ventilated area, make sure the room is designed to prevent the accumulation of refrigerant leaks resulting in a risk of fire or explosion due to ignition of the refrigerant caused by electric heaters, stoves, or other sources of ignition.
- Only persons with a current valid certificate from an industry-accredited assessment authority, which authorizes their competence to handle refrigerants safely in accordance with an industry recognized assessment specification, can work on or break into a refrigerant circuit.
- Servicing can only be performed as recommended by the equipment manufacturer. Maintenance and repair requiring the assistance of other skilled personnel can only be carried out under the supervision of the person competent in the use of flammable refrigerants.
- When defrosting and cleaning the product, do not use any means other than those recommended by the manufacturing company.
- This product may only be serviced by a qualified technician for maintenance to reduce the risk of electric shock.
Explanation of the safety symbols on the product
Icon
|
Description
---|---
|
Indication to explain that the product:
Contains one or more (extremely/highly) flammable components.
Installation
- Check the contents of the package
- Check that all parts are present and that no damage is visible on the parts. If parts are missing or damaged, contact the Nedis B.V. service desk via the website: www.nedis.com.
Before first use
1. Remove all packaging.
2. Clean the inside and outside of the product with a cloth with a mixture of water and vinegar.
3. Rinse the ice basket A14 with clean water.
4. Leave the lid A2 open for at least two hours to dry naturally.
Use
- Using the product
- Keep the product away from heat sources. Do not place the product on hot surfaces or near open flames.
- Keep the air outlet A13 at least 15 cm away from the wall.
- Keep the product at a distance from flammable objects such as furniture, curtains and similar.
- Only move the product in an upright position.
- Change the water in the water reservoir A5 at least once a day.
The produced ice in the first three cycles can be smaller and irregular.
1. Place the product on a stable and flat surface.
2. Open the lid A2, and take out A14.
3. Fill the water reservoir A5 up to the ‘MAX’ indicator A6 with clean water.
- Distilled water is not allowed. Mineral water is recommended.
- Open the bottom drain plug to release excess water, if the water exceeds the ‘MAX’ indicator.
4. Plug the power cable A12 into a power outlet.
5. Press the power button A11 to switch on the product.
6. Replace A14 and close A2.
- The ‘Ice making’ indicator A10 lights up. The ice cube maker is now making ice cubes. Created ice cubes are deposited in A14.
- When A14 is full. The ‘Ice full’ indicator A8 flashes.
7. Take out the ice immediately, do not let the ice overflow A14.
- The ‘Add water’ indicator A9 light turns red when A5 is empty.
- Press A11 to restart the product after emptying A14 and refilling A5.
Troubleshooting
Problem
|
Possible cause
|
Solutions
---|---|---
The product makes abnormal noises.
|
The voltage is lower than recommended.
|
Press the power button Aw to switch off the product.
Make sure that the electrical supply in your area matches a voltage of 220 – 240 VAC and a frequency of 50 Hz.
The water ‘Add water’ indicator light A9 lights up.
|
There is no water.
The pump is full of air.
|
1. Fill the water reservoir A5 up to the ‘MAX’ indicator A6 with clean water.
2.Press the power button A11 to restart the product.
The indicators A89q on the product do not work.
|
The power outlet has no power.
|
Plug the power cable A10 into a working power outlet.
The ice cubes are too large and stick together.
|
Ice of a previous cycle was left in the water tray A4.
|
Remove the ice cubes from the water tray A4 and the ice basket A14.
The product does not produce ice cubes.
|
The compressor has no refrigerant.
The compressor is defective.
The fan motor is defective.
|
Contact a qualified technician for service/repair.
All indicators A8, A9, A10 blink simultaneously.
|
The water tray A4 is blocked by an ice cube.
|
1.Switch off and unplug the product.
2.Remove the ice cubes which are blocking the water tray A4.
3.Press the power button A11.
The product restarts after 3 minutes.
The product is switched on, but the water is warming up.
|
The solenoid is defective.
|
Contact a qualified technician for service/repair.
The ice basket is full, but the ‘Ice full’ indicator A8 does not light up.
|
The ‘Ice full’ indicator A8 is defective.
|
Contact a qualified technician for service/repair.
Maintenance
- Cleaning the product
- Unplug the product before cleaning.
- Before cleaning and maintenance, switch off the product and disconnect the power.
- Do not use aggressive or flammable chemical cleaning agents such as ammonia, acid, acetone, benzene or spirit when cleaning the product.
- Avoid abrasives that can damage the surface.
- Do not spray the product with chemicals, acids, gasoline or oil.
Clean the product regularly as follows:
1. Press A11 to switch off the product.
2. Unplug A12.
3.Empty A4, A5, A14.
4. Clean the inside and outside of the product with a cloth with a mixture of water and vinegar.
5. Rinse A14 with clean water.
- Clean the product before storing the product for a long period of time.
- Only store the product in a well-ventilated area.
Warranty
Any changes and/or modifications to the product will void the warranty. We accept no liability for damage caused by improper use of the product.
This product is designed for private use (normal domestic use) only. Nedis is not responsible for wear, defect and/or damages caused by commercial use of the product.
Disclaimer
Designs and specifications are subject to change without notice. All logos, brands and product names are trademarks or registered trademarks of their respective owners and are hereby recognized as such.
Disposal
|
This symbol indicates that this product should not be thrown away with other household waste throughout the EU. To prevent possible harm to the environment or human health by uncontrolled waste disposal, you are responsible for recycling it so that it can promote the sustainable reuse of raw materials. To return your used product, you can use the regular return and collection systems or contact the store where the product was purchased. They can recycle this product for the environment.
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>