GT THRONE 04337 Gamer Chair Instruction Manual
- June 14, 2024
- GT THRONE
Table of Contents
GT THRONE 04337 Gamer Chair Instruction
GT Throne Product Information
Specifications:
- Chair Type : Gaming Chair
- Features: Hydraulic pump, Metal control unit, GT Receiver, Wheels
- Power Source: Power cord
- Compatibility: PC
- Additional Accessories : Headphones, Speakers
Product Usage Instructions
Electronics Setup
Headphones & Speakers
Digital USB Headphone – Please refer to the headphone user manual for setup
and usage instructions.
FAQ
Q: Where can I find additional resources for chair assembly and electronics
setup
A: You can visit our resources page at www.gtthrone.com for additional help
assembling your chair and setting up the electronics.
Q: How can I control the height, recline, and rocking of the chair
A: The height of the chair can be controlled with the control lever on the
right side. The recline of the chair can be controlled by loosening/tightening
the knob beneath the seat. Rocking can be locked by pushing in the control
lever.
Q: How do I pair the electronics pieces if they show red
A: If the electronics pieces show red, they will need to be re-paired.
Please refer to the electronics setup instructions for more details on how to
re-pair the devices.
Scan this QR code for electronics setup videos and additional resources
Thank you for purchasing the GT Throne
We’re confident that this immersive chair will take your gaming experience to
a royally different dimension—one where the loot is always bountiful, every
kill leads to a streak, and every championship and chicken dinner belongs to
you. A member of our team has personally inspected your package, but if you
have any questions, concerns or feedback, please let us know. If you need
additional help assembling your chair and electronics, visit our resources
page at www.gtthrone.com
Chair Parts
Electronics
- Attach the wheels to the base by pushing and clicking in.
- Install the hydraulic pump into the center of the base, with plastic cover sliding onto pump.
- Remove backrest side screws with MS Allen key.
- Step 4Line up backrest side screw holes with the seat base metal brackets.
- Tighten screws to secure backrest to seat base.
- Fix the plastic covers to the sides of the metal brackets. Attach the seat covers first, then click the side covers into the seat cover.
- Attach the metal mounting plate to the GT receiver with the 4 small screws included with the mounting plate.
- Line up one armrest bracket to the bottom 4 holes on the LEFT side. Place the GT Receiver’s bracket on top of the armrest. Using the MS Allen key, tighten the 4 screws with washer on the outside.
- Attach the other armrest on the RIGHT side without the GT Receiver. NOTE : the width of the armrest can be decided when screwing into the bottom of the chair
- Attach actuator wires to the back of the GT Receiver. The backrest actuator plugs in on the opposite side of the intensity knob. The two seat actuator wires plug into the two ports closet to the front of the chair.
- Fix the metal control unit to the base of the seat (4 screws have been fixed to the seat based prior to delivery). Assure the front arrow on the metal control unit faces outward and the control lever is on the right side of the chair.
- Insert the hydraulic unit into the opening of the control unit.
Finished
NOTE: The height of the chair can be controlled with control lever on the
right side. The recline of the chair can be controlled by loosening/tightening
the knob beneath the seat. Rocking can be locked by pushing in the control
lever.
- Power your chair by plugging the power cord into the GT trip wire. Plug the GT trip wire into the GT receiver.
- Take the GT USB Processor and plug into an open usb port on your PC.
The knob on the GT Receiver will control the intensity and frequency of the chair’s vibration
- Once both electronics pieces are powered, they should automatically pair and both show green. If they both show red then they will need to be re-paired.
- PAIRING – turn both pieces on by twisting each knob clockwise. First, push the sync button on the GT Receiver followed by the GT Processor. If they both do not turn green please see our trouble shooting section on the resource page of www.gtthrone.com
HEADPHONES & SPEAKERS
Digital USB Headphone
A headphone with a USB connection will need to be connected to a USB port on
your PC. You will then need to configure your PC to use 2 audio outputs while
you are using the GT Throne and a USB headset at the same time. Please see the
video on the electronic set-up page at
www.gtthrone.com with instructions on how to do so
on Windows computers.
USB DEVICE USAGE
Connect USB device to computer. Once chair is powered, press the pairing
button. Enjoy the experience
CHAIR DEVICE USAGE
Connect chair device to the provided power cord. Press pairing button on
USB device. Enjoy the experience
Safety and Certifications
Changes or modification to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment. RF Exposure Information FCC ID:2AK7R-02661 This equipment complies
with FCC radiation exposure limits set forth for an uncontrolled environment.
In order to avoid the possibility of exceeding the FCC radio frequency
exposure limits, human proximity to the antenna shall not be less than 20 cm
during normal operation.
RF Exposure Information FCCID: 2AK7R-04337
This equipment complies with FCC radiation exposure for SAR exclusion limits.
This device complies with the SAR exclusion limits at 5mm. Contact Information
RedSeat Entertainment , LLC. 6440 South Wasatch Blvd. Ste 105
Holladay, Utah 84121 (801)268-4331
www.gtthrone.com
FCC RULES
This device complies with Part 15 of the FCC Rules and this device also
contains license-exempt transmitter(s)/receiver(s). Operation is subject to
the following two conditions:
- (1) this device may not cause harmful interference, and
- (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment is not in direct contact with the body of the user under normal operating conditions. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
FCC ID : 2AK7R-02661
FCC ID : 2AK7R-04337 This FCC ID number is only located in this manual
and on the packaging, not on the device itself. This equipment has been tested
and found to comply with the limits for a Class B digital device, pursuant to
part 15 of theThese limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful
interference, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the device, thus reorienting the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced technician for help
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>