n-FAB 319418112 RS Nerf Steps Instruction Manual
- June 13, 2024
- n-FAB
Table of Contents
n-FAB 319418112 RS Nerf Steps
- I-SHEET NUMBER: INST-00296
- PART NUMBER: 319418112
- PRODUCT: RS STEP
- APPLICATION: 19-21 FORD RANGER CC
HARDWARE DESCRIPTION
| QTY.
---|---
HWKT-04239X
FHLB 04240X| M10x25mm HEX FLANGED BOLT| 12
| M10 CARRIAGE BOLT| 12
| M10 FLANGED HEX NUT| 12
PARTS INCLUDED
| QTY
---|---
DRIVER SIDE| 1
PASSENGER SIDE| 1
MOUNTING BRACKET| 6
Installation Instructions
- STEP 1: Identify driver side step.
- Step 2. Install the (x6) mounting brackets to each attachment point on the main tube using the supplied M10x25 carriage bolts, and M10 hex nuts and leave them loose for now. Note the bracket orientation for the DRIVER and PASSENGER side.
- STEP 3: Remove any factory running boards or hardware and discard them.
- STEP 4: Clean/tap the three factory-threaded mounting locations.
- STEP 5: Carefully place the step into place and loosely fasten using the supplied M10X25mm hardware.
- Step 6: Tighten the three lower bolts first followed by the three upper bolts.
- Step 7: Next, tighten brackets (x3) at the main tube.
- Step 8: Repeat steps 2-7 with the passenger side.
- Step 9: Your installation is now complete.
12302 Shiloh Church Rd. Houston TX 77066 Phone
281-880-6322 – Fax
281-880-6325
REVISION © 2018 N-FAB, INC. REVISION DATE.n-fab.com.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>