n-FAB 09-14 FORD F-150 QC CC Hoop Step Instruction Manual
- June 13, 2024
- n-FAB
Table of Contents
n-FAB 09-14 FORD F-150 QC CC Hoop Step Instruction Manual
N-FAB NERF STEP SYSTEM
Step2: Insert the supplied 5/16″ U-clips in the upper location in each (x3) mounting position.![n-FAB 09-14 FORD F-150 QC CC Hoop Step Instruction Manual
- Insert the supplied](https://manuals.plus/wp- content/uploads/2023/10/n-FAB-09-14-FORD-F-150-QC-CC-Hoop-Step-Instruction- Manual-Insert-the-supplied.jpg)
Step 3: Carefully raise step into place aligning brackets to each mounting
position. Use the supplied 5 1/6″ hex bolt, 5 1/6″ washer and 5 1/6″ hex nut
and hand tighten all x3 upper mounts.
Step 4: Next, install the supplied 3/8″x3/4″ carriage bolts, 3/8′ washers and
3/8″ nuts in all x3 lower mounts and leave loose.
Step 5: Tighten upper mounts first then pinch weld bolts. Torque to 20ft./lbs.
to secure steps to the truck.
Step 6: Repeat steps 2-5 with passenger side step.
12302 Shiloh Church Rd. Houston TX 77066
Phone 281-880-6322 – Fax
281-880-6325
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>