n-FAB 21-C BRONCO 4DR Wheel 2 Wheel Nerf Side Step Bars Installation Guide
- June 13, 2024
- n-FAB
Table of Contents
n-FAB 21-C BRONCO 4DR Wheel 2 Wheel Nerf Side Step Bars
- I-SHEET NUMBER: INST-00307
- PART NUMBER: 321417212
- PRODUCT: RS STEP
- APPLICATION: 21-C BRONCO 4DR
HARDWARE DESCRIPTION | QTY. |
---|
HWKT-04239X
FHLB 04240X| M10x25mm HEX FLANGED BOLT| 12
| M10 CARRIAGE BOLT| 12
| M10 FLANGED HEX NUT| 12
PARTS INCLUDED| QTY
---|---
DRIVER SIDE| 1
PASSENGER SIDE| 1
MOUNTING BRACKET| 6
INSTALLATION INSTRUCTION
- Step 1. Identify driver side step.
- Step 2. Install the (x6) mounting brackets to each attachment point on the main tube using the supplied M10x25 carriage bolts, M10 hex nuts and leave loose for now.
- Step 3. Remove any factory running boards or hardware and discard them.
- Step 4. Clean/tap the three factory-threaded mounting locations.
- Step 5. Carefully place step into place and loosely fasten using the supplied M10X25mm hardware.
- Step 6. Tighten the three lower bolts first followed with the three upper bolts.
- Step 7. Next, tighten brackets (x3) at the main tube.
- Step 8. Repeat steps 3-7 with the passenger side.
- Step 9. Your installation is now complete.
- 12302 Shiloh Church Rd. Houston TX 77066
- Phone 281-880-6322
- Fax 281-880-6325
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>