n-FAB 15-22 FORD F-150 CC Hoop Step Installation Guide
- June 13, 2024
- n-FAB
Table of Contents
n-FAB 15-22 FORD F-150 CC Hoop Step
HARDWARE DESCRIPTION
HARDWARE DESCRIPTION | QTY. |
---|---|
HWKT-00031X |
FLNT-
00696X
| M8-1.25 CLASS 8 SERRATED FLANGE
NUT
| 18
FDRW-
00736X
| M8 FENDER WASHER| 18
| 10MM Carriage bolt| 12
| 10MM flanged nut| 12
PARTS INCLUDED
PARTS INCLUDED | QTY |
---|---|
DRIVER SIDE STEP | 1 |
PASSENGER SIDE STEP | 1 |
MOUNTING BRACKETS | 6 |
Installation Instructions
Step 1. Identify driver side step.
Step 2. Install the (x6) mounting brackets to each attachment point on the main tube using the supplied M10x25 carriage bolts, M10 hex nuts and leave loose for now. Note the bracket orientation for driver and passenger.
Step 3. Starting with the Driver Side. Remove all 8mm flange nuts from the 8mm factory threaded studs to remove the OE running boards.
Step 4. Next, carefully raise the step assembly into position and align
the three brackets with the nine 8mm OE threaded studs.
Step 5. Using the supplied 8mm flanged nuts, fasten all nine mounting
positions. Leave loose at this time.
Step 6. Beginning at the rear bracket, push upwards on the tube to align
with the body then tighten only the lower rear fastener at this time.
Step 7. Next, move to the front bracket, push upwards on the tube to
level with the body. Tighten all three fasteners.
Step 8. Tighten the remaining fasteners on the middle and rear bracket.
Step 9. Next, tighten brackets (x3) at the main tube.
Step 10. Repeat steps 2-9 for passenger side.
I-SHEET PART NUMBER: INST-00282
PART NUMBER: 315418512
PRODUCT: RS HOOP STEP
APPLICATION: 15-22 FORD F-150 CC
17-22 FORD F-250/350 CC
CUSTOMERS SUPPORT
12302 Shiloh Church Rd. Houston TX 77066 Phone 281-880-6322 – Fax 281-880-6325
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>