n-FAB JPTS32 Detachable Step Instructions
- June 13, 2024
- n-FAB
Table of Contents
PART# JPTS32
DETACHABLE STEP
INST-02614
Components and Hardware:
Components and Hardware:
- Detachable step…………………………………………………………………(2)
- 1.5”x1” Flanged hex bolt……………………………………………………..(4)
- 1.5” Flanged Hex nut…………………………………………………………..(4)
Tools for Installation:
- 3/4” Wrench
INSTALL
Step 1. Attach the step to the mounts located in between the RKR rails using the supplied ½”x 1” Flanged hex bolts and ½” Flanged hex nuts. NOTE: The step will mount to the left of the bracket opposite of the weld.
Step 2. Torque bolts to a target torque of 40 ft.-lbs. / 54Nm
References
- Fab | A Digital Asset Marketplace for Content Creators
- N-Fab Steps, Running Boards & Accessories | RealTruck
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>