BRExhaust 106-0682 Direct Fit Exhaust System Kit Instructions

BRExhaust 106-0682 Direct Fit Exhaust System Kit

Product Information

Part No: 106-0682

Bill of Materials:

1. Part No: 168467
2. Part No: F1124-08
3. Part No: 168863
4. Part No: 16935
5. Part No: 169234
6. Part No: 167503
7. Part No: 169235

Product Usage Instructions

1. Step 1: (Carefully read all instructions before installation)

2. Disconnect the vehicle’s battery before removal of the OEM exhaust system. This will prevent electrical accidents and will reset the computer if it applies to the vehicle.

3. Remove existing exhaust system from the vehicle. Only remove parts that will be replaced.

4. Clean existing flange with a wire brush to ensure proper sealing.

5. Step 2: Attach item 3 to existing exhaust with items 1 and 2.

6. Step 3: Attach item 5 to item 3 with item 4.

7. Step 4: Attach item 7 to item 5 with item 6.

8. Step 5: Ensure new exhaust is not contacting
   any portion of the underbody of the vehicle or drivetrain.

9. Step 6: Tighten all clamps starting from rear of the vehicle. (DO NOT EXCEED 30FT-LB WHEN TIGHTENING CLAMP AND CHECK ALL CLAMPS AFTER 50 MILES. RETIGHTEN IF NECESSARY)

WARNING:

• When working on, under, or around any vehicle exercise caution. Please allow the vehicle’s exhaust system to cool before removal, as exhaust temperatures may cause severe burns.
• If working without a lift, always consult vehicle manual for correct lifting specifications.
• Always wear safety glasses and ensure a safe work area. Serious injury or death could occur if safety measures are not followed.
• BRExhaust recommends professional installation for all products Technical Support: 1-800-631-7271
• BRExhaust — 1901 Corporate Ctr, Oceanside, CA 92056 www.brexhaust.com

BILL OF MATERIALS

1. 168467
2. F1124-08
3. 168863
4. 16935
5. 169234
6. 167503
7. 169235

INSTALLATION INSTRUCTIONS

WARNING:

• When working on, under, or around any vehicle exercise caution.
• Please allow the vehicle’s exhaust system to cool before removal, as exhaust temperatures may cause severe burns. If working without a lift, always consult vehicle manual for correct lifting specifications.
• Always wear safety glasses and ensure a safe work area. Serious injury or death could occur if safety measures are not followed.

STEP 1:

• (Carefully read all instructions before installation) Disconnect the vehicle’s battery before removal of the OEM exhaust system.
• This will prevent electrical accidents and will reset the computer if it applies to the vehicle.
• Remove existing exhaust system from the vehicle.
• Only remove parts that will be replaced.
• Clean existing flange with a wire brush to ensure proper sealing.

STEP 2:

• Attach item 3 to existing exhaust with items 1 and 2

STEP 3:

• Attach item 5 to item 3 with item 4

STEP 4:

• Attach item 7 to item 5 with item 6

STEP 5:

• Ensure new exhaust is not contacting any portion of the underbody of the vehicle or drivetrain.

STEP 6:

• Tighten all clamps starting from rear of the vehicle. (DO NOT EXCEED 30FT-LB WHEN TIGHTENING CLAMP AND CHECK ALL CLAMPS AFTER 50 MILES. RETIGHTEN IF NECESSARY)
• BRExhaust recommends professional installation for all products
• Technical Support: 1-800-631-7271
• www.brexhaust.com

Documents / Resources

| BRExhaust 106-0682 Direct Fit Exhaust System Kit [pdf] Instructions
1983-91 GM Blazer-Jimmy, 106-0682, 106-0682 Direct Fit Exhaust System Kit, Direct Fit Exhaust System Kit, Fit Exhaust System Kit, Exhaust System Kit, System Kit, Kit
---|---

References

• MagnaFlow Exhaust, Mufflers & Cat Converters - Quality. Power. Sound.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>