estelle ESMPRHRDRYA Moisture Protect High Speed Ionic Hair Dryer User Guide
- June 5, 2024
- ESTELLE
Table of Contents
USER GUIDE
MOISTURE PROTECT HIGH-SPEED IONIC HAIR DRYER
ESMPRHRDRYA
Safety Precautions
To reduce the risk of malfunction, electric shock injury, fire death, and equipment or property damage, please be sure to observe the following safety precautions.
- Do not use it when the power cord or plug is damaged or hot. SAFETY & WARNINGS
- Do not use it when the power plug inserted into the socket is loose.
- Do not damage or modify or forcefully bend, pull, or twist the power cord. In addition, do not place heavy objects or squeeze the power cord.
- Do not use it with the power cord bundled.
- Do not leave the appliance unattended when powered on.
- Do not connect the power plug to or unplug from the household power socket when your hands are wet.
- Do not use it with wet hands.
- Do not use near-liquefied petroleum gas or other flammable products (such as volatile agents, paints thinners, sprays, etc.).
- Do not block or insert foreign objects such as hairpins into the air outlet, air inlet and ion-poor emitter.
- Do not place or store near the bathroom, sink, water, or other places filled with liquids and high humidity.
- Do not wrap the power cord around the body and handle during storage.
- Do not store it within the reach of children and infants, and do not allow children or infants to play with the appliance.
- Do not repair, disassemble, or modify the hairdryer yourself. When repairs are needed please contact kogan.com.
- Do not soak the hairdryer in water
- Do not use this hairdryer in the bath or shower. Do not use this hair dryer near a bathtub, shower basin or other vessels containing water.
- In the event of an abnormality or failure, please stop using it immediately, unplug the power supply, and contact kogan.com.
- Clean the power plug regularly to prevent dust accumulation. Disconnect the power plug and wipe with a dry cloth.
- When unplugging the power plug, do not pull the power cord; always pull it out by holding the power plug.
- Fully insert the power plug. Please use the socket alone; do not use a power terminal block.
- When the hairdryer blows hot air, if you see sparks at the air outlet, please stop using it and remove the dust attached to the outlet and the air outlet
- After use, please be sure to set the power switch to the [0] position and pull out the power plug from the socket
- This product must be installed and fixed in a place that cannot be touched during bathing
- To protect your safety, it is recommended to install a leakage protection device (RCD) with a rated leakage action current not exceeding 30 mA in the electrical circuit of the bathroom power supply and consult the RCD installer
- If the power cord is damaged, to avoid danger, it must be replaced by kogan.com.
- Properly dispose of the packaging bag and power plug protection of this product to keep it away from babies.
- This product is not suitable for use by persons with physical, sensory, or mental disabilities or persons who lack experience and knowledge (including children). A guardian must supervise and guide the use of this product and be responsible for the safety of the user.
- Avoid dropping the hairdryer or subjecting the hairdryer to strong shocks, which can cause electric shock or fire.
- During use, the air outlet and nozzle may become hot, please do not touch it with your hands.
- Do not use it when the air inlet is damaged.
- Do not use on babies.
- Please use it only for blow-drying and styling. Do not use it for pets or blow-drying clothing.
- Please keep more than 10 cm between the air inlet and your hair.
- Please keep more than 6cm between the air outlet and the hair.
This hair dryer comes with an overheating protection device, which can automatically switch to cold air when the temperature of the hairdryer is too high.
When this occurs, it is recommended to immediately turn off the power switch and unplug the plug from the power socket, and let it cool down for a few minutes before using it. Check that there is no thread or hair at the air inlet and outlet and then turn on the power switch.
OVERVIEW
INSTRUCTION
Steps for usage
Before using this product, check the air inlet and outlet to ensure that they
are not blocked by fluff, hair, or other items.
Plugin the power cable, and the four-color mode indicator light will flash
cyclically and enter the standby mode.
Lightly press the mode button to select the appropriate mode according to the
needs of care. Press and hold the mode button for 2 seconds to shut the
appliance down. Flick the wind speed adjustment key up and down to adjust the
appropriate wind speed.
Blue – Cold wind mode
Green (60 degrees) – Scalp mode
Purple (80 degrees) – Regular mode
Red (100 degrees) – Quick-drying mode
Simply remove the modeling air nozzle from the circular air outlet to detach.
CLEANING & CARE
Note:
-
Clean the hairdryer when it gets dirty. Use a soft cloth slightly dampened with tap water or soapy water to clean the case.
-
When storing the hairdryer, if there are still hair care products or cosmetics sticking to the handle or body it may degrade the plastic, causing discoloration, cracking and malfunction.
-
Unscrew the first layer of the air intake grille in an anticlockwise direction.
-
Use a paper towel or toothbrush to remove dust, hair, and other attachments from the air inlet.
-
Do not press or rub the air inlet with your nails or sharp objects to avoid damage.
-
Use a paper towel or a toothbrush to remove dust, hair, and other attachments on the first layer of mesh cover, or rinse with water to drain.
⇐ Please clean
the air inlet at least once a month
TROUBLESHOOTING
Default
| Possible reason|
Corrective Action
---|---|---
During the operation of hot air, cold air is often present. Sparks may appear.
(The spark is caused by the action of i the thermal switch as a protection
device and is not dangerous)| When the air inlet and outlet are blocked by
dust, the thermal switch will be activated, and cold air will often be blown
out during activation.
The air inlet is blocked by hair, hands, etc.| Remove the accumulated dust. Do
not block the air inlet.
The hot air is overheating abnormally.
The power plug is abnormally overheated.| The socket to which the product is
connected may be loose.| Please use a socket that is not loose
The air output is intermittent.
The power cord is abnormally overheated.| The power cord is damaged.|
immediate Discontinue use immediately and contact
kogan.com.
There is no wind during the operation of the product and the interior is red.|
| Discontinue use immediately and contact kogan.com.
There are abnormal sounds and vibrations during the use of the product.
The product body and handle are overheated abnormally.
The product body and handle are deformed.
There is a burring smell during use.
If you are unable to resolve the issue using the above methods, please contact kogan.com
SPECIFICATIONS
Rated input: 220V-240V ~ AC 50Hz
Rated power: 1800W (350-1800W)
Cable length: 1.8m
NOTES
Need more information?
We hope that this user guide has given you the assistance needed for a simple
setup.
For the most up-to-date guide for your product, as well as any additional
assistance you may require, head online to
help.kogan.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>