BRExhaust 108-0091 Jegs Muffler Kit Installation Guide
- June 1, 2024
- BRExhaust
Table of Contents
BRExhaust 108-0091 Jegs Muffler Kit
Product Specifications
- Part Number : 108-0091
- Manufacturer: BRExhaust
- Recommended Installation : Professional installation
- Technical Support : 1-800-631-7271
- Address : 1901 Corporate Ctr, Oceanside, CA 92056
- Website: www.brexhaust.com
- Revision : 000
- Date : 7/28/2023
Product Usage Instructions
Warning :
When working on, under, or around any vehicle exercise caution. Please allow the vehicle’s exhaust system to cool before removal, as exhaust temperatures may cause severe burns. If working without a lift, always consult vehicle manual for correct lifting specifications. Always wear safety glasses and ensure a safe work area. Serious injury or death could occur if safety measures are not followed.
BRExhaust recommends professional installation for all products.
For technical support or inquiries, contact BRExhaust at the provided phone number or visit their website.
INSTALLATION INSTRUCTIONS
- STEP 1 : (Carefully read all instructions before installation)Disconnect the vehicle’s battery before removal of the OEM exhaust system. This will prevent electrical accidents and will reset the computer if it applies to the vehicle. Remove the existing exhaust system from the vehicle. Only remove parts that will be replaced. Clean the existing flange with a wire brush to ensure proper sealing.
- STEP 2 : Attach [3] Muffler Assembly to existing exhaust and isolators with supplied [1] Gasket and [2] Hardware.
- STEP 3 : Ensure new exhaust is not contacting any portion of the underbody of the vehicle or drivetrain.
- STEP 4 : Tighten all clamps starting from rear of the vehicle. (DONOT EXCEED 30FT-LB WHEN TIGHTENING CLAMP AND CHECKALL CLAMPS AFTER 50 MILES. RETIGHTEN IF NECESSARY)
WARNING:
When working on, under, or around any vehicle exercise caution. Please allow the vehicle’s exhaust system to cool before removal, as exhaust temperatures may cause severe burns. If working without a lift, always consult the vehicle manual for correct lifting specifications. Always wear safety glasses and ensure a safe work area. Serious injury or death could occur if safety measures are not followed.
BRExhaust recommends
professional installation for all products
- Technical Support : 1-800-631-7271
- BRExhaust — 1901 Corporate Ctr, Oceanside, CA 92056
FAQS
Q: Can I install the product myself?
A: It is recommended to seek professional installation for thisproduct to ensure proper fitting and safety.
Q: How do I contact technical support?
A: You can reach BRExhaust technical support at 1-800-631-7271or visit their website for assistance.
Q: What should I do if I encounter difficulties during installation?
A: If you face challenges during installation, contact technicalsupport immediately for guidance and assistance.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>