uni-ubi Uface 5 Lite Face Recognition Terminal User Manual

PRODUCT BOOKLET
Uface 5 Lite
( OS-M35DM1 )

Dear customer,
Thank you for using our product. For better use, please carefully read this instruction. If you have any issues not mentioned here, please contact the provider. All parts of this booklet are reserved by our company, including words, pictures, and graphics. Without written permission, no unit or individual shall extract, copy, translate or edit the content in this instruction. 

Parts list

Dimensional Drawing

Operating Instruction

The software carried by the product divides into 2 versions: WO (WO platform, which provides the secondary need for software version when placing the order. Please contact the customer service for another version if downloaded or contact the customer services.

Appearance description

Instruction

H1: Net mouth
RJ45-3 (black)
RJ45-6 (yellow)
RJ45-1 (blue)
RJ45-2 (orange)| H2: Alarm input
GND (black)
ALARM_KEY (yellow)
ALARM_DOOR (blue)| H3: Wiegand output
WG-OUT_D1 (black)
WG-OUT_D0 (white)
GND (grey)
---|---|---
H4: Relay output
DOOR_NC (red)
DOOR_COM (orange)
DOOR_NO (white)| H5: Power input
Outside_GND (black)
Inside_12V+ (red)|

Illumination intensity

The recognized face, of which, the illumination intensity （“intensity” in short) shall not be lower than 30 Lux when the device is put in a totally dark environment, the face illumination intensity, 0.5m distance to the device, is about 100 Lux. The nearer the device, the higher the intensity is. If there is overexposure on the face, the face characteristics will be unable to be extracted and may lead to hard recognition.

Intensity test
The test standard is as shown in the picture: the angle between dotted line A and dotted line B is 90 °, the test adopts the common light meter with full- spectrum, and applies U30 standard light source, adjusts the distance between source light and test object, subject to the illumination intensity of the object face at this time.

Reference to intensity

Illumination intensity in actual scenarios
Light issues may lead to big differences between site  image and registered image; backlight, side-light and (Analysis: from the view of human eyes, the color changes on face skin may result in wrong recognition of identity; unclear exposure area, no matter large or small, may result in the identity judgment.)

Side light

The light source is near the object| Side-light may lead to uneven light on the face

Strong light
The device stands between the light source and the object| Direct strong light may cause overexposure

Backlight
The object stands between the device and the light source| The backlight may make the face too dark

Improvements

1. Install the device in a place with little impact from the light source.
2. Add a registered image according to the site condition, and it is suggested to use this product to enroll images.
3. Properly lower the threshold value according to usage.

| This place, 3m away from the window, or does not influence by sunlight, can be considered for installation
---|---
| Backlight, side-light, or direct strong light, is not suitable for installation.
| In other areas, install in suitable places according to actual light impact.
| Device
| Wall
| Glass window (same as the semi-outdoor scene with no walls)
| Person
| Curtain
| Light
| Door
Sunlight shines indoor
When the sunlight shines indoors through the window, the face recognition terminal device shall not be installed in the shown black shadow area, instead, shall be installed in place with little sunlight impact, no side- light, and no backlight. (Glass windows can be deemed as having no walls)| Glass window
If the room has a glass wall, there is no shield for sunlight, then it is suggested to hang curtains over the window, and install the recognition. (Glass windows can be deemed as having no walls)
---|---
Sunlight shines through the door, with a glass window on one side
Sunlight shines through the door, the device shall be installed at the place with shields and little light impact. Glass window can be deemed as no shields, the device shall be installed at the side without glass window or with a curtain hung.| Sunlight shines through the door
Sunlight shines through the door, the device shall be installed at the place with shields and little light impact.

Height

|

The suggested installation height (distance between the screen and the ground) is 1.4m, as the recognizable body height range, 0.5m distance away from the device, is 1.3m-1.7m; the recognizable body height range, 1m distance away from the device, is 1m-2m. (There are some deviations)

Steps

• Paste the installation sticker horizontally on the wall. According to the on-site position, choose a suitable place for drilling. For narrow edge, choose the upper and lower installation.
• Move the bracket, and align holes on the bracket and on the wall. Thread tail lines out of the hole, and use a self-tapping screw fix the bracket on the wall
• Connect the rail lines with the host, and move the device to up-down align the bracket slot. Use screws to fix the device & bracket
  

Wiring connection

System installation schematic drawing for magnetic door| System installation schematic drawing for automatic door
Wiring schematic drawing for touching switch of magnetic door| Wiring schematic drawing for sensor switch of automatic door
Wiring schematic drawing for the mechanical switch of magnetic door|

Installation notes

1. When arranging the wires, if the 12V power supply cable of the host does not adopt the “Special power strip” and is long-distance, resulting in large resistance, then abnormal phenomena may occur easily such metering is shown as follow.
2. The power adapter is put together with the device which is optional, such as EU standard, American standard, UK standard, and so on.

• Extension of power cable (weak current) cannot exceed 2m. otherwise. it may cause insufficient power supply for the host end, and abnormal phenomena like repeat restart and system crash may occur. If the power is far away from the device, the power cable can be extended (strong current).

• I use another power adapter. 9V 1A as an example, then insufficient voltage and too weak current may cause repeat restart.

• The cable cannot be too fine (such as network cable and fine line). it is suggested to connect the multi-strand cable in parallel or use copper core bold cable, to ensure voltage >11V.
    Attention: If using a network cable. the extension cable uses a 4-strand cable as a positive pole and a 4-strand cable as a negative pole.

• If not clear about how to extend, please contact the provider to change the “Special power strip”.

Features

• Characteristics
  Night infrared and RGB light: completely resolve image frauds in all kinds of carriers with dynamic dual-camera anti-for-ery: face database is 10000. the 1:N recognition accuracy is 99.99% under 0.1% false accept rate.

• Store records in local
  (a) Device using cloud platform supports storing 3 thousand pieces of face images (smaller than 400KB). 50-thousand pieces of recognition records (0.45KB) and about 15 thousand pieces of site capture images: (b) Device using LAN support storing 3 thousand pieces of face images (each image by 100KB) and 50-thousand pieces of recognition records (including the latest 15 thousand pieces of site capture images).

• Quick recognition speed
  (a) Face detection takes around 120ms. (b) Face feature extraction takes around 150ms. (c) Face comparison takes 10ms (with 100.000 face database. take the average value after multiple comparisons).

• Secondary development (integrated)
  Supports Wiegand 26 and 34 output. custom the configuration of output content

• Complete functions
  Support recognition distance configuration: supports stranger detection: supports saving the site images of face recognition and stranger detection.

• High extensibility
  Supports deployment methods like public network and LAN: supports screen display content configuration: built-in card reader access.

FAQ

• Try to restart and reset
  When the device stops in some interface for a long time, users can plug out the power switch, power-on reset, and then restart. If it RESET button for 8-12s to restart the device. make some feedback.

• Dustproof & Waterproof
  IP54, can prevent dust from invading the device and water from all directions.

• Drop resistance
  Please avoid operations such as falling, breaking, bending, heavily pressing, and so on.

• Cleaning
  Please use a soft cloth or such materials, lightly wipe the display screen or panel, and to avoid scrubbing with water and cleaner.

• Low-temperature environment

The normal working temperature for this device is -10 ℃~50 ℃ if the actual tempera the normal use of the device.

| Do not dirty or damage the display screen with oil-water or sharp objects
---|---
| Do not use the unknown power adapter to avoid burning out the device

Warranty description

Dear customer, Thank you for purchasing and using this product. To better guarantee your satisfaction, please carefully read the warranty clauses after purchase.
1. Warranty service
If the device. following the user manual and operating instructions. still breaks down. contact after-sales staff at once, as they will judge the causes on basis of customer description and give remote guidance: if the guidance does not work, then the customer can send back the device for maintenance and test: if the device is unable to be sent back. contact after-sales staff in advance and ask them to head to the site to do the field maintenance. However. if the device problems found are not resulted by hardware or software system of our company after the field maintenance. then the customer shall pay the extra fee incurred by the onsite service.
2. Instruction
There is a piece of product booklet inside the device package. and customers can contact after-sales staff and ask for installation guidance.
3. Warranty period
All products carry a 1-year guarantee period from the delivery date.
4. Warranty scope
Device breakdown caused by the following conditions is not included within the warranty scope:

• Any damages caused by incorrect use, maintenance, or storage. as not follow the user manual:
• Damages caused by falling, water intaking, improper storage, or any other man-made malicious damages:
• Malfunction caused by force majeure such as natural disasters and external causes such as abnormal voltage:
• Damages caused by shipment, please contact the department of transportation:
• Malfunction or damages caused by unfavorable operating environment, such as too high or too low tempera-ture. poor condition, abnormal power system, and soon:

Parts (power adapter, cables, screws) are not within the warranty scope. If parts are lost or damaged. please contact our staff to purchase.
5. Maintenance period
When receiving the product to be repaired. after-sales staff shall complete the maintenance and send it back within 5 working days. Further communication can be carried out if there are special circumstances.
6. Supplemental instruction

• Product damages, caused by natural disasters. external factors, or improper operations, are not included within the warranty scope. Our company will make the final judgment of whether the damage is caused by the above-mentioned terms. Users open the product secretly without permission. and cause certain damage. which is also not included within the replacement or warranty scope.
• If the device expires the warranty period or does not meet the warranty conditions. users may pay for the maintenance cost and shipping cost.
• If the device is sent back without communication. it will not be maintained or repaired normally or will not be refunded. damages caused by this issue will not be  compensated

CE Caution:
Use the Product in an environment with a temperature Between -10 and 50; Otherwise, it
may damage your product. Products can only be used below 2000m altitude
For the following equipment:
Product Name: Face recognition terminal
Model: OS-M35DM1

Trade Name:
Universal Ubiquitous Co., Ltd.
E-mail:[email protected]

hereby declares that this [Name: Face recognition terminal, Model: OS-M35DM1] is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU.

 adapter shall be installed near the equipment and shall be easily accessible.
Only can use the adapter as below:
Power Adapter Model: XED-RZ120200S
Input: 100-240Vac, 50/60Hz, 0.6A;
Output: DC12V, 2A SHENZHEN XED POWER SUPPLY CO., LTD
The plug is considered as a disconnect device of the adapter.
This roduct is intended for sale and application in a business environment.
RED Article 10 2
This product can be used across EU member states
RED Article 10 10
-The product is a class 1 product, with No restrictions
The RF distance between body and product is 20cm
Wi-Fi (2.4G)
Frequency Range: 2412-2472MHz for 802.11b/g/n(HT20);…. 2422-2462MHz for 802.11b/g/n(HT40)
Max. RF Output Power: 17.90dBm (EIRP)
NFC
Frequency Range: 13.56MHz
Radiated H-field: 38.55dBuA/m(@3m)

FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body.
FCC WarningThis device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV  technician for help.

NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

References

• Ubisoft | Welcome to the official Ubisoft website

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>