BRExhaust 167538 Wheelbase Replacement Exhaust Kit Instruction Manual

: June 13, 2024
: BRExhaust

Table of Contents

BRExhaust 167538 Wheelbase Replacement Exhaust Kit
Product Information
Product Usage Instructions
INSTALLATION INSTRUCTIONS
Documents / Resources

BRExhaust 167538 Wheelbase Replacement Exhaust Kit

BRExhaust-167538-Wheelbase-Replacement-Exhaust-Kit-
PRODUCT

Product Information

The product being referred to in the user manual is an exhaust
system. The part number for this particular exhaust system is
106-0655. The exhaust system consists of various components
identified by numbers in the bill of materials:

Item 1: Unspecified component
Item 2: Nuts and bolts (not included)
Item 3: Unspecified component
Item 4: Unspecified component
Item 5: Unspecified isolator
Item 6: Unspecified isolator
Item 7: Unspecified component

Product Usage Instructions

Carefully read all instructions before installation.
Before removing the OEM exhaust system, disconnect the vehicle’s battery to prevent electrical accidents and reset the computer if applicable.
Remove the existing exhaust system from the vehicle, only removing the parts that will be replaced.
Clean the existing flange with a wire brush to ensure proper sealing.
Attach item 3 to the existing exhaust using item 2 (nuts and bolts not included).
Attach item 7 to the existing exhaust using item 1.
Attach item 5 to the existing isolator, and attach item 3 and item 7 using item 4.
Attach item 6 to the existing isolators, and attach item 5 using item 4.
Connect the slip-fit joint on item 6 with the clamps provided.
Ensure that the new exhaust is not contacting any portion of the underbody of the vehicle or drivetrain.
Tighten all clamps starting from the rear of the vehicle. Do not exceed 30 ft-lb when tightening the clamp. Check all clamps after driving 50 miles and retighten if necessary.

Warning:

When working on, under, or around any vehicle, exercise caution.
Allow the vehicle’s exhaust system to cool before removal to avoid severe burns from high exhaust temperatures.
If working without a lift, always consult the vehicle manual for correct lifting specifications.
Always wear safety glasses and ensure a safe work area. Failure to follow safety measures could result in serious injury or death.
BRExhaust recommends professional installation for all their products.
Technical Support: 1-800-631-7271
BRExhaust: 1901 Corporate Ctr, Oceanside, CA 92056
Website:www.brexhaust.com

INSTALLATION INSTRUCTIONS

BILL OF MATERIALS

167538
169426
169172
167539
169169
169170
169171

WARNING:

When working on, under, or around any vehicle exercise caution.
Please allow the vehicle’s exhaust system to cool before removal, as exhaust temperatures may cause severe burns.
If working without a lift, always consult the vehicle manual for correct lifting specifications.
Always wear safety glasses and ensure a safe work area. Serious injury or death could occur if safety measures are not followed.

STEP 1:

(Carefully read all instructions before installation) Disconnect the vehicle’s battery before removal of the OEM exhaust system.
This will prevent electrical accidents and will reset the computer if it applies to the vehicle.
Remove the existing exhaust system from the vehicle. Only remove parts that will be replaced.
Clean the existing flange with a wire brush to ensure proper sealing.

STEP 2:

Attach item 3 to the existing exhaust with item 2 (nuts and bolts not included)

STEP 3:

Attach item 7 to the existing exhaust with item 1

STEP 4:

Attach item 5 to the existing isolator and items 3 and 7 with item 4

STEP 5:

Attach item 6 to existing isolators and item 5 to item 4

STEP 6:

Connect slip-fit joint on item 6 with clamps provided

STEP 7:

Ensure the new exhaust is not contacting any portion of the underbody of the vehicle or drivetrain.

STEP 8:

Tighten all clamps starting from the rear of the vehicle. (DO NOT EXCEED 30FT-LB WHEN TIGHTENING THE CLAMP AND CHECK ALL CLAMPS AFTER 50 MILES. RETIGHTEN IF NECESSARY)
BRExhaust recommends professional installation for all products
Technical Support: 1-800-631-7271
BRExhaust — 1901 Corporate Ctr, Oceanside, CA 92056
www.brexhaust.com

Documents / Resources

| BRExhaust 167538 Wheelbase Replacement Exhaust Kit [pdf] Instruction Manual
167538 Wheelbase Replacement Exhaust Kit, 167538, Wheelbase Replacement Exhaust Kit, Replacement Exhaust Kit, Exhaust Kit, Kit
---|---