THINK GIZMOS TG904 3D Wooden Jigsaw Puzzle Rubber Band Target Shooter User Manual
- June 15, 2024
- THINK GIZMOS
Table of Contents
TG904
3D WOODEN JIGSAW PUZZLE
RUBBER BAND TARGET SHOOTER
User Manual
TG904 3D Wooden Jigsaw Puzzle Rubber Band Target Shooter
Not for children under 14 Years. To be used under the direct supervision of an
adult.
Any packaging ties, bags and screws are not part of the product. For safety
please remove and discard any packaging ties, bags and screws before giving
this toy to your child.
SUITABLE FOR AGES 14+
PLEASE FOLLOW THESE INSTRUCTIONS CAREFULLY AND KEEP THIS INSTRUCTION BOOKLET
FOR FUTURE REFERENCE.
DUE TO CONTINUAL IMPROVEMENTS ACTUAL PRODUCT MAY BE DIFFERENT TO ILLUSTRATIONS
If you have any issues with your product or have any questions, please contact
us via email: help@thinkgizmos.com
This is the quickest way to resolve any problems. You will be surprised how
fast we will get back to you on email with a resolution.
All our products are covered by our manufacturer’s warranty, details can be
found on page 6.
For more of our brilliant products, search Amazon for “ThinkGizmos”.
ThinkGizmos “Small enough to care big enough to deliver”.
IMPORTANT INFORMATION
1.1 Safety Information
Thank you for purchasing the Rubber Band Target Shooter. Please read through
this instruction manual before use as it contains all the information you need
about how to correctly enjoy this product.
CAUTION
ADULT SUPERVISION REQUIRED
WARNING! Do not try to modify this product in any way as this may
invalidate your warranty.
WARNING! Contains small parts, child supervision is required at all
times.
PLEASE NOTE: This item is for use with the wooden targets only. Do not
aim at people or animals.
MAINTENANCE & TROUBLESHOOTING
2.1 Care & Maintenance
- Please ensure you follow the instructions when assembling.
- Keep these instructions for reference.
- Assemble with glue (included) when instructed.
- Please take care when detaching parts as they are fragile.
- Ensure parts are fixed firmly in place when assembling.
- Keep away from exposure to direct sunlight for extended periods and keep away from direct heat sources.
- Do not drop on a hard surface or disassemble the unit.
- Do not immerse in water.
2.3 Download Build Instructions
There should be build instructions contained within the box.
If for any reason you lose or misplace these instructions, they can be
downloaded again from the following web address: https://bit.ly/3tIrJHJ
If this does not resolve your issue. Please contact ThinkGizmos via email:
help@thinkgizmos.com and we will endeavor to
resolve your problem as quickly as possible.
PARTS AND BUILDING ICONS
3.1 Parts and Building Icons
Please ensure you take your time and do not rush the building. Accidental
breakages usually happen due to not taking due care and attention.
There are some spare parts contained within. But if you find you are missing a
part, please contact us.
Item | Spring | Spring | Spring | Wax |
---|---|---|---|---|
Number | P1 | P2 | P3 | P4 |
Illustration | ||||
Quantity | 2 | 2 | 2 | 1 |
Icon | Meaning | |||
--- | --- | |||
Printed Side | ||||
Blank Side | ||||
Polish the marked part with the wax bar. | ||||
Special attention in assembly required. |
ADDITIONAL BUILDING INSTRUCTIONS
4.1 Additional Building Instructions
5:
Notice: Ensure the Receiver Hook part is installed facing the correct
direction.
9a:
The board will bend slightly when fitting into part E2. Pay attention when
assembling to not snap the part.
9b:
- Bullet Hook.
- Receiver Hook.
- Fore-end.
- Trigger.
Shooting tips:
- Load 2 rubber bands per shot on the bullet hook and receiver hook. Rotate the hook gear to load another shot. 5 Shots in total can be loaded.
- Slide the fore-end back to ready the shot.
- Aim, Pull the trigger. Fire!
WARRANTY
Warranty Information
What is Covered:
This warranty covers any defects in materials or workmanship, with the
exceptions stated below.
How Long Coverage Lasts:
This warranty runs for 1 Year from the date your Rubber Band Target Shooter is
delivered.
What is not covered:
Any problem that is caused by abuse, misuse, or an act of God (such as a
flood) are not covered.
What We Will Do:
If the Product proves defective during the warranty period, we will provide
you with the instructions for the return, and we will take one of the
following actions: (i) replace the Product with a product that is the same or
equivalent to the Product you purchased; (ii) repair the Product; or (iii)
refund to you the whole of or part of the purchase price of the Product.
How To Get Service:
To obtain instructions on how to obtain service under this warranty, contact
our customer service by phone or email. You will find the contact details of
our customer service below. Customer service may ask you questions to
determine your eligibility under this warranty, and if you are eligible you’ll
be given instructions for returning the defective Product. If we send you a
replacement or repair your Product, we will pay the cost of delivering the
replacement or repaired Product to you.
Do not return the item to the original place of purchase, please contact Think
Gizmos direct.
IMPORTANT:
Where you see this icon, check the
Additional Building Instuctions on Page 5 of the main manual for additional
instructions.
If you misplace the main manual you can download a copy at the following link
– https://bit.ly/3c8Qabp
Parts List
Item | Spring | Spring | Spring | Wax |
---|---|---|---|---|
Number | P1 | P2 | P3 | P4 |
Illustration | ||||
Quantity | 2 | 2 | 2 | 1 |
Think Gizmos, Unit 19, Lawson Hunt Industrial Park,
Broadbridge Heath, West Sussex, RH12 3JR
Tel.: +44/(0)203 384 8304
help@thinkgizmos.com
www.thinkgizmos.com
“CE” marking states that the product is compliant to European Directives
It is possible to request a full copy of Declaration of compliance from the
Distributor:
Think Gizmos is a registered trademark of Paramount Zone Ltd.
www.thinkgizmos.com
Think Gizmos brand is owned and operated by Paramount Zone Ltd.
Manufactured and Distributed by:
Paramount Zone Limited,
Unit 19, Lawson Hunt Industrial Park,
Horsham, Sussex, RH12 3JR, UK.
EU Representative Address:
Paramount Zone Ireland Limited
Lee View House, 13 South Terrace,
Cork, T12T0CT, Ireland