BEGA 67529.2 Floor Lamp for Indoor Instruction Manual
- June 13, 2024
- BEGA
Table of Contents
BEGA 67529.2 Floor Lamp for Indoor
Product Information
Product Description| Floor lamp made of metal base and hand-blown opal glass,
satin matt for free radiating and glare-free light.
---|---
Weight| 14.8 kg
Lamp Type| Lampholder E 27
Supplied Lamp| Dimmable lamp included
Luminaire Efficiency| 76%
Product Usage Instructions
- Insert lamps into sockets.
- Place glass over fitting and fix it with the glass retaining rods.
- Establish electrical connection to the socket (230 V).
- Switch the luminaire on and off by moving the controller on the foot dimmer.
- The brightness can be infinitely adjusted using the foot dimmer.
Instructions for use
Application
Floor lamp made of metal base and hand-blown opal glass, satin matt for free
radiating and glare-free light.
Lamp
-
Luminaire with screw base E 27
-
Lamp output max. 4 × 60 W
-
This product contains light sources of energy efficiency class E
-
Supplied lamp
4 × BEGA LED lamp 13565 LED 12 W · 1400 lm · 2700 K dimmable -
Supplied lamp
4 × BEGA LED lamp 13592 LED 12 W · 1400 lm · 3000 K dimmable -
Luminaire efficiency: 76%
-
Detailed technical and lighting data for the lamps can be found in the data sheets on our website.
Please note:
The foot dimmer of the luminaire is only suitable for the operation of
dimmable LED lamps with a max. power of 4 x 25 W. If incandescent lamps are
used, the max. power of the lamps is 4 x 60 W. A mixed operation of LED lamps
and incandescent lamps is not permitted.
Product Description
-
Stainless steel housing
-
Hand-blown opal glass, satin matt
-
Black cable · 2m, with safety plug
-
Foot dimmer for infinite light adjustment (100% – 30%)
-
Lampholder E 27
-
Safety class I
c – Conformity mark -
Weight: 14.8 kg
Safety
The installation and operation of this luminaire are subject to national safety regulations. The manufacturer accepts no liability for damage caused by improper use or installation. If subsequent modifications are made to the luminaire, the person responsible for these modifications shall be considered the manufacturer.
Installation
- Insert lamps into sockets.
- Place glass over fitting and fix it with the glass retaining rods.
- Establish electrical connection to the socket (230 V).
- Switch the luminaire on and off by moving the controller on the foot dimmer.
- The brightness can be infinitely adjusted.
Relamping · Maintenance
- Disconnect the electrical installation.
- Take off the glass.
- Clean glass and luminaire housing.
- Use only solvent-free cleansers.
- Change the lamp.
- Fix glass to the luminaire housing.
Spares
- Spare glass 11 003 313 .0RG
- LED lamp 2700 K 13 565
- LED lamp 3000 K 13 592
- Lampholder 63 000 337
- Connecting cable with foot dimmer 75 003 916
BEGA Gantenbrink-Leuchten KG · Postfach 3160 · 58689 Menden · info@bega.com · www.bega.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>