Wentronic 67245 DC Power Inverter User Manual
- June 13, 2024
- wentronic
Table of Contents
Wentronic 67245 DC Power Inverter User Manual
Safety instructions
The user manual is part of the product and contains important information for
correct use.
-
Read the user manual completely and carefully before use.
The user manual must be available for uncertainties and passing the product. -
Keep this user manual
Power supply
Notes for network separation
The product has no power switch and may be used only in easily accessible outlets to quickly remove it in an emergency and after use. « Voltage-free only with pulled plug. « In case of emergency, during thunderstorms and after use, pull the pro- duct on its plug housing!
Product
- Do not open the housing.
- Do not modify product and accessories.
- Use product, product parts and accessories only in perfect condition. Not meant for children. The product is not a toy!
- Do not repair defective products yourself, but contact the dealer or the manufacturer.
- Avoid stresses such as heat and cold, moisture and direct sunlight, micro- waves, vibrations and mechanical pressure.
- Use the product only in dry interior rooms.
- Do not cover the product.
- Place, install and transport product, product parts and accessories in a safe way.
- Route the cable safely.
Risk of injury by stumbling and falling.
Description and function
Product
Used to supply power to DVB-T antennas that do not have an external connec-
tion for power supply.
Scope of delivery
DC-power external, Power supply, User Manual
Operating Elements
See Fig. 1.
- External
- Antenna Connector
- DC Connector
- TV Connector
- Power supply
Intended use
We do not permit using the device in other ways like described in G chapter ,Description and Function® or in the ,Safety Instructions*. Use the product only in dry interior rooms. Not attending to these regulati- ons and safety instructions might cause fatal accidents, injuries, and damages to persons and property.
Preparation
- Check the scope of delivery for completeness and integrity.
- Compare the specifications of all used products.
These must match or be in the specified range.
Connection and operation
- Connect the power external fo the TV by integrated coax connection.
- Connect the coax cable of your DVB-T antenna to the coax socket of the power external.
- Connect power supply unit with power External and a well accessible mains socket.
6 Maintenance, Care, Storage and Transportation The product is maintenance- free.
NOTICE!
Material damage
- Only use a dry and soft cloth for cleaning
- Do not use detergents or chemicals.
- Store the product out the reach of children and in a dry and dust-protected ambience when not in use.
- Store cool and dry.
- Keep and use the original packaging for transport.
Disposal instructions
Product
According to the European WEEE directive, electrical and electronic equipment
must not be disposed with consumers waste. Its components must be recycled or
disposed apart from each other. Otherwise contami- native and hazardous
substances can damage the health and pollute the environment. As a consumer,
you are committed by law to dispose electrical and electronic devices to the
producer, the dealer, or public collecting points at the end of the devices
lifetime for free. Particulars are regulated in national right. The symbol on
the product, in the user manual, or at the packaging alludes to these terms.
With this kind of waste separation, application, and waste disposal of used
devices you achieve an important share to environmental protection.
WEEE No: 82898622
Packaging
Packaging can be disposed of free of charge at the suitable collection points
– paper belongs in paper bins, plastics belong in yellow sacks and glass
belongs in used glass bins. DE4535302615620
EU Declaration of conformity
With the CE sign Goobay®, a registered trademark of the Wentronic GmbH ensures, that the product is conformed to the basic European standards and directives.
Specifications
Item-No. | 67245 |
---|
Power supply
Model| SW0500550-A02
Input| 100-240 V—, 50/60 Hz, 200 mA
Output| 5.0 Vrn”, 0.55 A, 2.75 W
0 Operational efficiency| 72.4 %
zero load power consumption| 0.05 W
Dimensions| 55 x 36 x 60 mm
Cable Length| 1.8 m
Weight| 62 g
External
|
Dimensions| 50 x 40 x 22 mm
Weight| 27 g
Cable Length| 0,1 m
Symbols used
For indoor use only| IEC 60417- 5957|
---|---|---
Alternating current| IEC 60417- 5032|
Direct current| IEC 60417- 5031|
Recycling| ISO 7001 – PI PF 066|
Subject to change without notice
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>