ParrotUncle F8237110V Ceiling Fan User Guide
- June 10, 2024
- ParrotUncle
Table of Contents
Parrot Uncle F8237110V Ceiling Fan User Guide
Safety Information
- To reduce the risk of electric shock, the electricity has been turned off at the circuit breaker or fuse box before begin.
- The outlet box and support structure must be securely mounted and capable of reliably supporting 351b.(15.9kg).Use only UL listed outlet boxes marked “Acceptable for Fan Support of 35Ibs(15.9kg)or less.”
- The fan must be mounted with a minimum of 7 ft.(2.1m) clearance from the trailing edge of the blades to the floor.
- Do not operate the reversing switch while the fan blades are in motion. You must turn the fan off and stop the blades before you reverse the blade direction.
- Do not place objects in the path of the blades.
- To avoid personal injury or damage to the fan and other items, please be careful when working around or cleaning the fan.
- Electrical diagrams are for reference only. Light kits that are not packed with the fan must be UL-listed and marked suitable for use with the model fan you are installing. Switches must be UL General Use Switches. Refer to the instructions packaged with the light kits and switches for proper assembly.
- After making electrical connections , spliced conductors should be turned upward and pushed carefully up into the outlet boxThe wires s hould be spreab apart with the grounded conductor and the ungrounded conductor on the other side of the outlet box.
- All setscrews must be checked and retightened where necessary before installation.
WARNING:TO reduce the risk of personal injury, do not bend the blade
brackets (also referred to as flanges) during assembly or after installation.
Do not insert objects in the path of the blades .
WARNING: Remove the rubber motor stops on the bottom of the fan before
installing the blades or testing the motor.
WARNING: To reduce the risk or fire or electric shock,do not use this fan
with any solid-state speed control device.
WARNING:To avoid possible electric shock, turn the electricity off at the
main fuse box before wiring.lf you feel you do not have enough electrical
wiring knowledge or experience,contact a licensed electrician.
WARNING: Electrical diagrams are for reference only. Optional use of any
light kit shall be UL-listed and marked suitable for use with this fan.
WARNING: To reduce the risk of fire, electric shock, or personal injury,
mount to outlet box marked’ Acceptable for fan support of 35 lbs.(15.9 kg)or
less ” and use the screws provided with the outlet box.
WARNING: SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER
THANK YOU FOR YOUR PURCHASE
Thank you for purchasing this quality product. To ensure correct function and safety, please read and save all instructions before using the product
SAFETY TIP
- To avoid possible electric shock, turn off the electricity at the main fuse box or circuit panel before you begin the fan installation or before servicing the fan or installing accessories
- Read all instructions and safety information carefullybeforeinstallingyour fan and save these instructions.
- Make sure all electrical connections comply with local codes or ordinances and the National Electrical Code. If you are unfamiliar with electric wiring, please use a qualified and licensed electrician.
- Make sure you have a location selected for your fan that allow clear space for the blades to rotate, and at least seven (7) feet of clearance between the floor and the fan blade tips. The fan should be mounted at least thirty (30) inches from walls or other upright structures.
- WARNING: The outlet box and ceiling support joist used must be securely mounted, and capable of supporting at least 100 pounds. To reduce the risk of fire, electric shock or personal injury, mount to the outlet box marked acceptable for fan supported and use mounting screws provided with the outlet box. The box must be supported directly by the building structure.
- WARNING: To reduce the risk of fire, electric shock or personal injury, mount to outlet box marked “acceptable for fan support” and use mounting
- Electrical diagrams are for reference only. Light kits that are not packed with the fan must UL listed and marked suitable for use with the model fan you are installing. Switches must be UL. general use switches. Refer to the instructions packaged with the light kits and switches for proper assembly.
- After installation is complete, check that all connections are absolutely secure.
- WARNING: To reduce the risk of electrical shock and fire, do not use this fan with any solid-state fan speed control device, or rheostat.
- WARNING: To reduce the risk of electrical shock and fire, do not use this fan with any solid-state fan speed control device, or rheostat.
- Do not separate the reverse switch until the fan has come to a complete stop.
- Do not insert anything into the fan blades while they are rotating.
- WARNING: To Reduce The Risk Of Personal Injury, Do Not Bend The Blade Brackets When Installing The Brackets, Balancing The Blades, Or Cleaning The Fan. Do Not Insert Foreign Objects In Between Rotating Fan Blades.
- To avoid personal injury or damage to the fan and other items, be cautious when working around or cleaning the fan.
- Do not use water or detergent when cleaning the fan or fan blades. A dry dust cloth or lightly dampened cloth will be suitable for most cleaning.
NOTE: The important safety precautions and instructions appearing in the
manual are not meant to cover all possible conditions and situations that may
occur. It must be understood that common sense and caution are necessary
factors in the installation and operation of this fan.
NOTE: This product is not intended for use by persons (including
children) with reduced physical, sensory or mental capabilities are different
or are impaired, or lack of experience or knowledge, unless such persons are
supervised or trained to operate the appliance by a person responsible for
their safety.
Screws(2PCS)
Plastic wire nut (4PCS)
Mounting screws (2PCS)
washer (2PCS)
Remote control (1pcs)
Attaching the fan to the electrical box
WARNING: To reduce the risk of fire,electric shock or personal A1injury,
mount to an outlet box marked “Acceptable for fan support ! of 35 lbs .
(15.9kg) or less ,” and use the screws provided with the outlet box.
NOTE: The mounting bracket(A) is designed to slide into place on an
outlet box with the outlet box screws(LL)
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>