BEGA 33 634 Ceiling and Wall Luminaire Instructions
- June 13, 2024
- BEGA
Table of Contents
BEGA 33 634 Ceiling and Wall Luminaire
Product Information
- Product Name: Decken- und Wandleuchte
- Translation: Ceiling and wall luminaire
- Translation: Plafonnier et applique
- Model Number: 33 634
- IP Rating: IP 64
- Weight: 3.6 kg
- Material: Aluminium and hand-blown satin matt three-ply opal glass
- Suitable for: Interior and exterior lighting applications
- Lighting Distribution: Soft and uniform
Product Usage Instructions
- Ensure compliance with national safety regulations during installation and operation.
- Installation and commissioning should be done by a qualified electrician.
- The manufacturer is not liable for damage caused by improper use or installation.
- If modifications are made to the luminaire, the person responsible for the modifications is considered the manufacturer.
- The luminaire uses E27 screw base lamps.
- The included lamp has a luminous efficacy of 39%.
- Additional BEGA LED lamps (13 586, 13 588, 13 590, 13 592) can be used with this luminaire.
- Refer to the data sheets on the manufacturer’s website for detailed technical and lighting data of the lamps.
- To install the lamps, follow the provided instructions.
- To clean the luminaire, open it and use suitable cleaning products. Do not use high-pressure cleaners.
- Spare parts available: Spare glass with gasket, LED lamp 3000K, Lampholder, Reflector, Gasket glass
- Refer to the provided part numbers for ordering spare parts.
DIMENSION
Instructions for use
Application
Ceiling and wall luminaire made of aluminium and hand-blown satin matt three-
ply opal glass. For a variety of interior and exterior lighting applications.
Ideal for places where a soft and uniform lighting distribution is required.
Product description
- Luminaire made of aluminium and stainless steel
- BEGA Unidure® coating technology
- Opal glass, satin matt, with screw neck
- Silicone gasket
- Reflector made of pure anodised aluminium
- 2 mounting holes ø 5.5 mm
- Distance apart 280 mm
- 2 cable entries for through-wiring of mains
- supply cable ø 7-10.5 mm
- Connecting terminal and
- earth conductor terminal 2.5@
- Lampholder E 27
- Safety class I
- Protection class IP 64
- Dust-tight and protection against splash water
- Impact strength IK04
- Protection against mechanical
- impacts < 0.5 joule
- r – Safety mark
- c – Conformity mark
- Weight: 3.6 kg
Safety
The installation and operation of this luminaire are subject to national
safety regulations. Installation and commissioning may only be carried out by
a qualified electrician. The manufacturer accepts no liability for damage
caused by improper use or installation. If subsequent modifications are made
to the luminaire, the person responsible for these modifications shall be
considered the manufacturer.
Lamps
- Luminaire with screw base E 27
- Lamp output max. 3 × 60 W
- This product contains light sources of energy efficiency classes E, F
- Supplied lamp
- 3 × BEGA LED lamp 13 584
- LED Retrofit 7 W · 2415 lm · 3000 K
- Luminaire efficiency: 39%
- Additional BEGA LED lamps are available for this luminaire:
- 13 586 LED 7 W · 805 lm · 3000 K dimmable
- 13 588 LED 8 W · 1055 lm · 3000 K
- 13 590 LED 12 W · 1400 lm · 3000 K
- 13 592 LED 12 W · 1400 lm · 3000 K dimmable
Detailed technical and lighting data for the lamps can be found in the data sheets on our website.
Installation
- Lead the mains supply cable through the cable entry into the luminaire housing.
- For wall installation note the position of application “arrow down”.
- Fix luminaire base with enclosed or any other suitable fixing material onto the mounting surface.
- Be sure to use the gasket rings supplied.
- Make earth conductor connection.
- Push silicone sleeves over the lines and make electrical connection.
- Insert lamps.
- Screw glass clockwise into the luminaire base against the gasket .
- Make sure that gasket is positioned correctly.
Relamping · Maintenance
Disconnect the electrical installation. Open the luminaire and clean. Use only solvent-free cleaning agents. Change the lamp. Check the gasket and replace, if necessary. Close the luminaire. For cleaning, do not use high pressure cleaners.
Spares
- Spare glass with gasket 11 002 779 40
- LED lamp 3000K 13 584
- Lampholder 63 000 355
- Reflector 76 000 835
- Gasket glass 83 001 205
CONTACT
- BEGA Gantenbrink-Leuchten KG
- Postfach 31 60
- 58689 Menden
- info@bega.com .
- www.bega.com.