BEGA 50966.1K3 LED Track Spotlight Instruction Manual

: June 13, 2024
: BEGA

Table of Contents

BEGA 50966.1K3 LED Track Spotlight
Product Information
Product Usage Instructions
Dimension
Instructions for use
Safety
Replacing the LED module
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

BEGA 50966.1K3 LED Track Spotlight

Product Information

The product is a luminaire that requires installation and operation in accordance with national safety regulations. It is recommended to have a qualified electrician perform theinstallation and commissioning. The manufacturer is not liable for any damage caused by improper use or installation. The luminaire isequipped with electronic components that are protected against overvoltage according to DIN EN 61547. Additional protection against transients is recommended and can be found on the manufacturer’s website. The product has different module designations, colour temperatures, colour rendering indexes, module luminous flux, luminaire luminous flux, and luminaire luminous efficiency. The connected wattage for the lamp module is 12.3 W, and for the luminaire is 14.5 W. The rated temperature is between 25 and 60 degrees Celsius.

Product Usage Instructions

Screw the enclosed trim ring with the attached reflector into the luminaire housing by turning it clockwise until it stops. Make sure it is fixed by clamping.
Place the surface washer adapter flush on the conductor rail in the desired position.
Push the two fixing levers on the underside of the adapter to the right until they click into their end position.
Set the desired LED beam direction by turning and tilting the luminaire housing.
To unlock the adapter, move the two fixing levers in opposite directions until they disengage.

Dimension

Instructions for use

Application
Ceiling mounted track spotlight · indoor luminaire for 3-phase Eurostandard- Plus® track systems. The optical system of the washer is swivel mounted and rotatable. Symmetrical wide beam light distribution. With BEGA Hybrid Optics® : Highly efficient andlow-loss light distribution, thanks to reflector and optical lens.
Product description
Track spotlight with adapter Cast aluminium luminaire housing, finish Colour velvet white, Polycarbonate track adapter with integrated LED power supply unit Trim ring · Chrome finish Clear safety glass Optical silicone lens · BEGA Hybrid Optics® Reflector surface made of pure aluminium LED power supply unit 220-240 V y 50/60 Hz DALI-controllable Basic insulation is provided between the mains and control cables Safety class II 2 c – Conformity mark Weight: 0.9 kg This product contains light sources of energy efficiency class(es) E

Safety

The installation and operation of this luminaire are subject to national safety regulations. Installation and commissioning may only be carried out by a qualified electrician. The manufacturer accepts no liability fordamage caused by improper use or installation. If subsequent modifications are made to the luminaire, the person responsible for these modifications shall be considered the manufacturer.|
Overvoltage protection
The electronic components installed in the luminaire are protected against overvoltage in accordance with DIN EN 61547. To achieve an additional protection against e. g. transients, etc. we recommend separate overvoltage protection components. You can find them on our website at www.bega.com.

Lamp

Module connected wattage 12.3 W
Luminaire connected wattage 14.5 W
Rated temperature ta = 25 °C
Ambient temperature ta max = 60 °C

50 966.1 K3

Module designation LED-0986/930
Colour temperature 3000 K
Colour rendering index CRI > 90
Module luminous flux 1685 lm
Luminaire luminous flux 1313 lm
Luminaire luminous efficiency 90,6 lm / W
50 966.1 K4
Module designation LED-0986/940
Colour temperature 4000 K
Colour rendering index CRI > 90
Module luminous flux 1710 lm
Luminaire luminous flux 1332 lm
Luminaire luminous efficiency 91,9 lm / W

Light technique
Track spot · surface washer with adjustable optical system. Optical system 0-60° swivel-mounted and infinitely rotatable 360° around the vertical luminaire axis. Symmetrical wide beam light distribution. Half beam angle 58°
Installation
LED are high-quality electronic components! Please avoid touching the light output opening of the LED directly during installation or relamping. The track spotlight with adapter is ready for operation in 3-phase EUROSTANDARD-PLUS® track systems.The mounting is done without tools in the bus bar.
IMPORTANT:
Ensure that the adapter’s two lateral stays are located on the same side as the matching guide profile of the track before installing the adapter in the 3-phase EUROSTANDARDPLUS ® track system. To select the phase ( 1 2 3 ) the turning knob on the rear side of the adapter has to be operated accordingly. Screw enclosed trim ring with attached reflector into the luminaire housing by turning it clockwise until it stops, so that it is fixed by clamping. Place the surface washer adapter flush on the conductor rail in the desired position. Push the two fixing levers on the underside of the adapter to the right until they click into their end position. Set the desired LED beam direction by turning and tilting the luminaire housing. Move the two fixing levers in opposite directions until they disengage to unlock the adapter.
Cleaning · Maintenance
Clean luminaire regularly with solvent-free cleansers from dirt.

Replacing the LED module

The designation of the LED module is noted on a label in the luminaire. The light colour and light output of BEGA replacement modules correspond to those of the modules originally fitted. The replacement can be carried out by a qualified person using standard tools. Disconnect the system and open the luminaire. Uninstall the reflector. Please follow the installation instructions for the LED module.Install the reflector. Defective glass must be replaced. Close the luminaire.

Spares