Skullcandy S2JTW-N745 Jib True Wireless In-Ear Headphones User Guide

: June 5, 2024
: Skullcandy

Skullcandy S2JTW-N745 Jib True Wireless In-Ear Headphones User Guide

Auto Pair Mode

Pairing Mode

Auto Power – On

Power-On

Auto Power – Off

Power-Off

Charge Earbuds

Charge Case

Charge Case Battery Life

Flash = Low Battery
Flashes = Medium Battery
Flashes = High Battery

Pairing Mode

Left Side or Right Side
On Mode
Not Connected To Device

Left Side or Right Side
*Off Mode

Pair New Device

“Jib True”
Left Side or Right Side

Power-On

Left Side and Right Side

Power – Off

Left Side and Right Side

Play/Pause

▶II Left Side or Right Side

Track Forward

Right Side

Track Back

Left Side

Volume Up

Right Side

Volume Down

Left Side

Answer/End

Left Side or Right Side

Activate Voice Assistant

Left Side or Right Side

Clear Paired Device

Left Side and Right Side
*Off Mode

Questions Visit: www.skullcandy.com

Speaker Driver: 6mm, Impedance: 22 Oh Tis, THD <3%@1KHz, Voltage Regulation: SI/, 500mA, Bluetooth® S.O, Frequency Band: 2402MHz-2480MHz, Maximum Power: 10mw, Weight: 63.5g.

Maximum opera1ing temperature 45°C.

FCC Compliance Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation, If this equipment does cause harmful interference to radio or television reception. which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

ISED SAR Compliance Statement
This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment. End user must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
The portable device is designed to meet the requirements for exposure to radio waves established by the ISED. These requirements set a SAR limit of 1.6 W/kg averaged over one gram of tissue. The highest SAR value reported under this standard during product certification for use when propel worn on the body.

Americas
Skullcandy, Inc
6301 N Landmark Dr.
Park City, UT 84098 U.S.A.
Skullcandy.com

Canada
Skullcandy Canada ULC
329 Railway St. Unit 205
Vancouver, BC. V6A 1A4 Canada
Skullcandy.ca

Europe
Skullcandy Europe BY
Postbus 425
5500AK Veldhoven Nederland
Skullcandy.eu

M~xico
Skullcandy Mexico S de RL de CV/vistoteles218
Polanco IV Seccion, Miguel Hidalgo
11550, Mexico City, Mexico
Skullcandy.mx

Contains Li-ion battery. Battery must be recycled or disposed of properly
Made in China.

Hardware Version: V04 (Earbud)/
V6.0 (Charging case)
Software Version: V0.95 (Earbud)/
V2.0.9957 (Charging case)

Jib True
MODEL: S2J1W
FCC ID: Y22-S2JTW
IC: 10486A-S2.J1W