BEGA 66 058 Ceiling Mounted Downlight Instruction Manual
- June 12, 2024
- BEGA
Table of Contents
Technical amendments reserved
Ceiling mounted downlight
66 058
IP 65
Instructions for use
Application
Surface mounted downlight with symmetrical light distribution.
The partially frosted crystal glass produces an additional vertical light and
supplements the light directed downwards by multi-facetted light graphics.
Product description
Luminaire made of aluminium alloy, aluminium and stainless steel BEGA Unidure®
coating technology Crystal glass with thread, partially frosted Silicone
gasket
Reflector made of pure anodised aluminium 2 mounting holes ø 4.5 mm Distance
apart 180 mm 2 cable entries for through-wiring of mains supply cable ø 7-10.5
mm, max. 5 G 1.5@ Connecting terminal and earth conductor terminal 2.5@ LED
power supply unit 220-240 V x 0/50-60 Hz DC 170-276 V DALI-controllable
Basic insulation is provided between the mains and control cables BEGA Thermal
Switch ®
Temporary thermal shutdown to protect temperature-sensitive components Safety
class I Protection class IP 65 Dust-tight and protection against water jets
Impact strength IK06 Protection against mechanical impacts < 1 joule r
Safety mark c
**** Conformity mark
Weight: 4.2 kg This product contains light sources of energy efficiency
classes D
Overvoltage protection
The electronic components installed in the luminaire are protected against
overvoltage in accordance with DIN EN 61547.
To achieve an additional protection against e. g. transients, etc. we
recommend separate overvoltage protection components. You can find them on our
website at www.bega.com.
Safety
The installation and operation of this luminaire are subject to national
safety regulations. Installation and commissioning may only be carried out by
a qualified electrician.
The manufacturer accepts no liability for damage caused by improper use or
installation. If subsequent modifications are made to the luminaire, the
person responsible for these modifications shall be considered the
manufacturer.
Lamp
| Module connected wattage | 35.7 W |
|---|---|
| Luminaire connected wattage | 39.3 W |
| Rated temperature | ta = 25 °C |
| Ambient temperature | ta max = 40 °C |
66 058 K3
| Module designation | LED-0785/830 |
|---|---|
| Colour temperature | 3000 K |
| Colour rendering index | CRI > 80 |
| Module luminous flux | 6010 lm |
| Luminaire luminous flux | 3278 lm |
| Luminaire luminous efficiency | 83,4 lm / W |
66 058 K4
| Module designation | LED-0785/840 |
|---|---|
| Colour temperature | 4000 K |
| Colour rendering index | CRI > 80 |
| Module luminous flux | 6165 lm |
| Luminaire luminous flux | 3363 lm |
| Luminaire luminous efficiency | 85,6 lm / W |
Installation
LED are high-quality electronic components! Please avoid touching the light
output opening of the LED directly during installation or relamping.
Screw out glass from the base.
Lead the mains supply cable through the cable entry into the luminaire
housing. Fasten the luminaire housing with the supplied fastening material or
other suitable fastening material to the mounting surface.
Be sure to use the gasket rings supplied.
In order to guarantee the maximum service life of the electrical components,
the enclosed desiccant pouch must be placed in the luminaire.
Remove the desiccant pouch from the foil packaging and place it in the
position marked by the red information label immediately before finally
closing the luminaire.
Make the earth conductor connection and the electrical connection. For digital
control please use the connecting terminal DA, DA.
In case this terminal is not used the luminaire will be operated at full
light output. Make sure that gasket is positioned correctly. Screw the glass
into the luminaire housing against the gasket.
Cleaning · Maintenance
Clean luminaire regularly with solvent-free cleansers from dirt and deposits.
Do not use high pressure cleaners.
Die Bezeichnung des LED-Moduls ist auf einem Replacing the LED module
The designation of the LED module is noted on a label in the luminaire.
The light colour and light output of BEGA replacement modules correspond to
those of the modules originally fitted.
The module can be replaced by qualified persons using standard tools.
Disconnect the system and open the luminaire. Please follow the installation
instructions for the LED module.
Inspect and, if necessary, replace the luminaire gaskets. Defective glass must
be replaced. Close the luminaire.
Spares
| Spare glass | 11 003 120 10 |
|---|---|
| LED power supply unit | DEV-0391/700 |
| LED module 3000 K | LED-0785/830 |
| LED module 4000 K | LED-0785/840 |
| Reflector | 76 001 369 M |
| Gasket | 83 001 466 |
BEGA Gantenbrink-Leuchten KG · Postfach 31 60 · 58689 Menden
info@bega.com
www.bega.com
Documents / Resources
| BEGA
66 058 Ceiling Mounted
Downlight
[pdf] Instruction Manual
66 058 Ceiling Mounted Downlight, 66 058, Ceiling Mounted Downlight, Mounted
Downlight, Downlight
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>