BEGA 12 165.2 Ceiling and Wall Luminaire for Indoor Use Instruction Manual
- June 12, 2024
- BEGA
Table of Contents
BEGA 12 165.2 Ceiling and Wall Luminaire for Indoor Use
Product Information
The product is a luminaire with the following specifications:
-
Overvoltage protection: The electronic components installed in the luminaire are protected against overvoltage in accordance with DIN EN 61547. Separate overvoltage protection components are recommended for additional protection against transients and can be found on our website at www.bega.com.
-
Safety: The installation and operation of this luminaire must comply with national safety regulations. Only qualified electricians should carry out the installation and commissioning.
The manufacturer is not liable for damage caused by improper use or installation. Any subsequent modifications to the luminaire should be performed by a responsible person who will be considered the manufacturer. -
Lamp Module connected wattage : 31.8 W
-
Luminaire connected wattage: 35 W
-
Rated temperature: 25° to 50°
-
Ambient temperature: 12 165.2 K3
-
Module designation: LED-0531/930
-
Color temperature: 3000 K
-
Color rendering index (CRI): > 90
-
Module luminous flux: 4645 lm
-
Luminaire luminous flux: 3201 lm
-
Luminaire luminous efficiency : 91.5 lm/W
Product Usage Instructions
To attach the glass to the luminaire housing:
- Place the glass on the luminaire housing.
- Ensure that the holding spring bolts fit into the notches of the glass.
- Turn the glass clockwise until it is locked.
- This will provide a safe and vibration-resistant holding of the glass.
To release the glass from the luminaire housing:
- Turn the glass counterclockwise.
Spare Parts
The following spare parts are available:
- Spare glass: 11 002 772 .0R G
- LED power supply unit: DEV-0391/700
- LED module 3000 K: LED-0531/930
Dimension
Instructions for use
Application
- Ceiling and wall luminaire · indoor luminaire made of hand-blown opal glass, satin matt, and metal housing, for all lighting tasks.
- They are ideal for places where a soft and uniform lighting distribution is required.
Product Description
-
Metal housing, finish Colour white aluminum
-
Hand-blown opal glass, satin matt, with sliding-bolt closure 2 mounting holes ø 5.5mm
-
Distance apart 280mm 2 cable entries for through-wiring for mains cable up to ø 10,5 mm max. 5 x 1.5@
-
Connecting terminal 2.5@ with plug connection
-
Earth conductor connection 2-pole connecting terminal for digital control
-
LED power supply unit 220-240 V x 0/50-60 Hz DC 170-276 V
-
DALI-controllable
-
Basic insulation is provided between the mains and control cables
-
BEGA Thermal Control®
-
Temporary thermal regulation to protect temperature-sensitive components without switching off the luminaire
-
Safety class I
-
Protection class IP 44
-
Protected against granular foreign bodies ≥ 1 mm and splash water Impact strength IK04
-
Protection against mechanical impacts < 0.5 joule
r – Safety mark
c – Conformity mark -
Weight: 6.0 kg
-
This product contains light sources of energy efficiency class(es) E
Overvoltage protection
- The electronic components installed in the luminaire are protected against overvoltage in accordance with DIN EN 61547.
- To achieve an additional protection against e.g. transients, etc. we recommend separate overvoltage protection components.
- You can find them on our website at www.bega.com.
Safety
- The installation and operation of this luminaire are subject to national safety regulations.
- Installation and commissioning may only be carried out by a qualified electrician.
- The manufacturer accepts no liability for damage caused by improper use or installation.
- If subsequent modifications are made to the luminaire, the person responsible for these modifications shall be considered the manufacturer.
Lamp
- Module connected wattage 31.8 W
- Luminaire connected wattage 35 W
- Rated temperature ta= 25 °C
- Ambient temperature ta max= 50 °C
12 165.2K3
- Module designation LED -0531/930
- Color temperature 3000 K
- Color rendering inde x CRI > 90
- Module luminous flux 4645 lm
- Lu minaire luminous flux 3201 lm
- Luminaire luminous efficiency 91,5 lm/W
Installation
- LED are high-quality electronic components!
- Please avoid touching the light output opening of the LED directly during installation or relamping.
- Disassemble the LED module.
- Loosen LED connection and earth connection (plug connection).
- Dismantle the mains supply cable max. 80 mm.
- Lead mains supply cable through the cable entry into the luminaire housing.
- Fix the luminaire housing with enclosed or any other suitable fixing material onto the mounting surface.
- It is imperative to use the enclosed gaskets.
- Make earth and electrical connections to the terminal.
- For digital control please use the connecting terminal DA, DA.
- In case this terminal is not used the luminaire will be operated at full light output.
- Make an earth connection between the LED module and luminaire housing (plug connection).
- Push LED plugs into couplers as far as it will go.
- Assemble LED module.
- Tighten the screws evenly (max. 0,8 Nm).
- Please observe that the LED module is not damaged mechanically.
- Insert the opal glass into the luminaire housing with sliding bolt glass closure and turn the glass clockwise up to the stop.
- Place glass to the luminaire housing and observe that the holding springbolts fit into the notches of the glass.
- Turn the glass clockwise until it is locked.
- Thus, you reach a safe and vibration-resistant holding of the glass.
- To release the glass from the luminaire housing, turn it counter-clockwise.
Replacement of the LED module Maintenance
- The designation of the LED module is noted on a label in the luminaire.
- The light colour and light output of BEGA replacement modules correspond to those of the modules originally fitted. The module can be replaced by qualified persons using standard tools.
- Disconnect the system.
- Unscrew glass from luminaire housing by turning it counterclockwise.
- Clean glass and luminaire regularly with solvent-free cleansers from dirt.
- Please follow the installation instructions for the LED module.
- Screw in glass by turning it clockwise as far as it will go.
- A broken glass must be replaced.
Spares
- Spare glass 11 002 772 .0RG
- LED power supply unit DEV -0391/700
- LED module 3000 K LED- 0531/930
- BEGA Gantenbrink-Leuchten KG
- Postfach 3160
- 58689 Menden
- info@bega.com
- www.bega.com
Documents / Resources
| BEGA
12 165.2 Ceiling and Wall Luminaire for Indoor
Use
[pdf] Instruction Manual
12 165.2 Ceiling and Wall Luminaire for Indoor Use, 12 165.2, Ceiling and Wall
Luminaire for Indoor Use, Ceiling and Wall Luminaire, Wall Luminaire,
Luminaire
---|---