BEGA 44007 Wall luminaire Applique Instructions
- June 12, 2024
- BEGA
Table of Contents
BEGA 44007 Wall luminaire Applique
Product Information
- Product Name: Wandleuchte Wall luminaire Applique
- Model Number: 44 007
- Material: Luminaire back housing made of aluminium alloy, Surround made of stainless steel, Opal glass
- Steel Grade: 1.4301
- Lampholder: E27
- Safety Class: I
- Protection Class: IP44
- Weight: 3.8 kg
- Lamp Output: Max. 100W
- Luminaire Efficiency: 60%
Dimension
Instructions for use
Application
Wall luminaire made of stainless steel and hand-blown opal glass. A luminaire
shielded to the top for a host of lighting aplications in interior and
exterior design.
Product description
Luminaire back housing made of aluminium alloy Surround made of stainless
steel Steel grade no. 1.4301 Opal glass 2 mounting holes ø 6.5 mm Distance
apart 85 mm 1 cable entry for mains supply cable up to ø 10,5 mm Lampholder
terminal 2.5@ Earth conductor connection Lampholder E 27 Safety class I
Protection class IP 44 Protected against granular foreign bodies ≥ 1 mm and
splash water Impact strength IK02 Protection against mechanical impacts < 0.2
joule r – Safety mark c – Conformity mark Weight: 3.8 kg
Safety
The installation and operation of this luminaire are subject to national safety regulations. Installation and commissioning may only becarried out by a qualified electrician. The manufacturer accepts no liability for damage caused by improper use or installation. If subsequent modifications are made to the luminaire, the person responsible for these modifications shall be considered the manufacturer.
- Lamp
- Luminaire with screw base E 27
- Lamp output max. 100 W
- This product contains light source of energy
- efficiency class E
- Supplied lamp
- BEGA LED lamp 13590
- LED 12 W · 1400 lm · 3000 K
- Luminaire efficiency: 60%
Additional BEGA LED lamps are available for this luminaire:
- 13 584 LED 7 W · 805 lm · 3000 K
- 13 586 LED 7 W · 805 lm · 3000 K dimmable
- 13 588 LED 8 W · 1055 lm · 3000 K
- 13 592 LED 12 W · 1400 lm · 3000 K dimmable
Detailed technical and lighting data for the lamps can be found in the data
sheets on our website.
Installation
Lead the mains supply cable through the cable entry into the luminaire
housing. Fix luminaire base with enclosed or any other suitable fixing
material onto the mounting surface. Be sure to use the gasket rings supplied.
Make earth conductor connection. Push silicone sleeves over the lines to make
an electrical connection. Insert lamp. Insert the opal glass into the fixed
springs, push it centrical and fix with the screwable spring.
Relamping · Maintenance
Undo screw of the sliding spring up to the stop. Pull off the opal glass from
the luminaire back housing. Clean the glass using only suitable cleansers.
Change the lamp. Place opal glass onto the luminaire back housing. Tighten
screw of sliding spring. When cleaning please do not use high-pressure
cleaners.
Cleaning · Maintenance
After installation, the luminaire should first be cleaned. Building dust, residues from contact adhesives, paint splashes and rust film must be completely removed. Never use high pressure cleaners and cleaning implements made of normal steel, steel brushes or steel wool because they cause extraneous rust to form. When using stainless steel cleaners, please read the directions carefully. Cleaning agents containing hydrochloric acid and chlorides should never be used.We recommend cleaning the luminaires regularly.
- Spares
- Spare glass 11 002 243 .1
- LED lamp 3000K 13 590
- Lampholder 63 000 105
BEGA Gantenbrink-Leuchten KG · Postfach 31 60 · 58689 Menden · [email protected] · www.bega.com