BEGA 12130.3 Ceiling and Wall Luminaire Instruction Manual

: June 12, 2024
: BEGA

Table of Contents

BEGA 12130.3 Ceiling and Wall Luminaire
Product Information
Product Usage Instructions
Dimensions
Product Description
Specifications
Installation
Maintenance
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

BEGA 12130.3 Ceiling and Wall Luminaire

BEGA-12130-3-Ceiling-and-Wall-Luminaire-product

Product Information

The product is a luminaire made of aluminium with a polished aluminium finish. It features a hand-blown opal glass with a satin matt texture and a screw neck. The luminaire has a silicone gasket and two cable entries for through- wiring for mains. It has a distance apart of 190 mm and a connecting terminal of 2.5@ with a plug connection. The luminaire also has an earth conductor connection and a 2-pole connecting terminal for the LED power supply unit. It operates on a LED-Netzteil with a voltage range of 220-240 V and frequency range of 50-60 Hz DC 176-276 V. The luminaire is DALI-controllable and has one DALI address.

It has basic insulation between the mains and control lines. The luminaire has temporary thermal regulation to protect temperature-sensitive components without switching off the light. It is classified as safety class I and has a protection class of IP 64, making it dust-tight and protected against splash water. The luminaire has an impact strength of IK05 and weighs 2.4 kg. The product contains light sources of energy efficiency class(es) D.

Product Usage Instructions

The installation and operation of this luminaire must comply with national safety regulations.
Installation and commissioning should only be carried out by a qualified electrician.
The manufacturer is not liable for any damage caused by improper use or installation.
If any modifications are made to the luminaire, the person responsible for the modifications will be considered the manufacturer.
The electronic components in the luminaire are protected against overvoltage according to DIN EN 61547.
To achieve additional protection against transients and other issues, separate overvoltage protection components are recommended.
For more information on overvoltage protection components, visit the website www.bega.com.

Dimensions

BEGA-12130-3-Ceiling-and-Wall-Luminaire-fig-1

Application

Ceiling and wall luminaire · indoor luminaire made of aluminium and hand-blown opal glass, satin matt.
For a variety of lighting applications.

Product Description

Luminaire made of Aluminium, finish Polished aluminium Hand-blown opal glass, satin matt, with screw neck
Silicone gasket
2 cable entries for through-wiring for mains supply
cable up to ø 10.5 mm max. 5 G 1.5@ 2 mounting holes ø 5.5 mm
Distance apart 190 mm
Connecting terminal 2.5@ with plug connection
Earth conductor connection: 2-pole connecting terminal for digital control
BEGA Ultimate Driver®
LED power supply unit: 220-240 V 0/50-60 Hz
DC 176-276 V
DALI-controllable
Number of DALI addresses: 1
Basic insulation is provided between the mains and control cables
BEGA Thermal Control®
Temporary thermal regulation to protect temperature-sensitive components without switching off the luminaire
Safety class I
Protection class IP 64
Dust-tight and protection against splash water
Impact strength IK05
Protection against mechanical impacts < 0.7 joule
: Safety mark
CE: Conformity mark
Weight: 2.4 kg
This product contains light sources of energy efficiency class(es) D

Safety

The installation and operation of this luminaire are subject to national safety regulations.
Installation and commissioning may only be carried out by a qualified electrician.
The manufacturer accepts no liability for damage caused by improper use or installation.
If subsequent modifications are made to the luminaire, the person responsible for these modifications shall be considered the manufacturer.

Specifications

Overvoltage protection

The electronic components installed in the luminaire are protected against overvoltage in accordance with DIN EN 61547.
To achieve an additional protection against e. g. transients, etc. we recommend separate overvoltage protection components.
You can find them on our website at www.bega.com.

Lamp

Module connected wattage: 13.8 W
Luminaire connected wattage: 16 W
Rated temperature: ta = 25 °C
Ambient temperature: ta max = 45 °C

12 130.3 K3

Module designation: LED-0854/930
Colour temperature: 3000 K
Colour rendering index: CRI > 90
Module luminous flux: 2255 lm
Luminaire luminous flux: 1231 lm
Luminaire luminous efficiency: 76,9 lm / W

Installation

LED are high-quality electronic components!
Please avoid touching the light output opening of the LED directly during installation or relamping.
Remove glass from luminaire housing by turning it counter-clockwise.
Disassemble LED module.
Disconnect plug connection.
Lead the mains supply cable through the cable entry into the luminaire housing.
Fix luminaire housing with enclosed or any other suitable fixing material onto the mounting surface.
It is absolutely essential to use the enclosed gaskets.
Push silicone sleeves over the lines, make ground and electrical connection to the terminal – plug connection.
For digital control please use the 2-pole plug connector (DALI).
In case this connector is not used the luminaire will be operated at full light output.
Push plug into coupler as far as it will go.
Assemble LED module.
Screw glass with gasket firmly into the luminaire housing by turning it clockwise.
Make sure that gasket is positioned correctly.

Maintenance

Cleaning /Maintenance

Clean luminaire regularly with solvent-free cleansers from dirt.
Defective glass must be replaced.

Replacement of the LED module

The designation of the LED module is noted on a label in the luminaire.
The light colour and light output of BEGA replacement modules correspond to those of the modules originally fitted. The module can be replaced by qualified persons using standard tools.
Disconnect the system and open the luminaire.
Please follow the installation instructions for the LED module.
Inspect and, if necessary, replace the luminaire gaskets.
Defective glass must be replaced.
Close the luminaire.

Spares