BEGA 89 009 Ceiling Lights white Instruction Manual
- June 12, 2024
- BEGA
Table of Contents
BEGA 89 009 Ceiling Lights white
Product Information
This product is a lamp luminaire with a screw base E14. It has a maximum lamp output of 40W. The luminaire efficiency is 70%. The product contains light sources of energy efficiency class E. Detailed technical and lighting data for the lamps can be found in the data sheets on our website.
Product Usage Instructions
- Safety: The installation and operation of this luminaire must comply with national safety regulations. Only a qualified electrician should carry out the installation and commissioning. The manufacturer is not liable for damage caused by improper use or installation. If modifications are made to the luminaire, the person responsible for these modifications will be considered the manufacturer.
- Installation:
- Pass the mains supply cable through the mounting plate.
- Fix the base of the luminaire onto the mounting surface using the enclosed or suitable fixing material. Ensure to use the enclosed gaskets.
- Make an earth conductor connection.
- Push silicone sleeves over the lines and make electrical connections.
- Insert the lamp into the luminaire.
- Insert the opal glass into the luminaire base with the sliding bolt glass closure. Turn the glass clockwise until it reaches the stop.
- The Sliding-Bolt Closure: The sliding-bolt closure ensures a safe and vibration-resistant holding of the glass. To lock the glass, place it onto the base plate and ensure that the holding spring bolts fit into the notches of the glass. Turn the glass clockwise until it is locked. To release the glass, turn it counter-clockwise.
Dimensions
Application
- Ceiling and wall luminaire · indoor luminaire made of hand-blown opal glass, satin matt and metal housing, for all lighting tasks.
- They are ideal for places where a soft and uniform lighting distribution is required.
- Luminaire with a high protection class.
Specifications
Lamp
- Luminaire with screw base E 14
- Lamp output max. 40 W
- This product contains light sources of energy efficiency class E
- Supplied lamp
- BEGA LED lamp 13552
- LED Retrofit 4 W · 470 lm · 2700 K
- Supplied lamp
- BEGA LED lamp: 13594
- LED Retrofit: 4 W · 470 lm · 3000 K
- Luminaire efficiency: 70%
- Detailed technical and lighting data for the lamps can be found in the data sheets on our website.
Product Description
- Luminaire housing made of aluminium, finish Colour white
- Hand-blown opal glass, satin matt, with sliding-bolt closure
- 2 mounting holes ø 4.5 mm
- Distance apart 80 mm
- 1 cable entry for mains supply cable up to ø 10.5 mm max. 3 x 1.5@
- Lampholder terminals 2.5@
- Earth conductor terminal
- Lampholder E 14
- Safety class: I
- Protection class: IP 44
- Protected against granular foreign bodies ≥ 1 mm and splash water
- Impact strength IK05
- Protection against mechanical impacts < 0.7 joule
- : Safety mark
- CE: Conformity mark
- Weight: 0.8 kg
Safety
- The installation and operation of this luminaire are subject to national safety regulations.
- Installation and commissioning may only be carried out by a qualified electrician.
- The manufacturer accepts no liability for damage caused by improper use or installation.
- If subsequent modifications are made to the luminaire, the person responsible for these modifications shall be considered the manufacturer.
Installation
- Pass the mains supply cable through the mounting plate.
- Fix base of the luminaire with enclosed or any other suitable fixing material on to the mounting surface.
- It is imperative to use the enclosed gaskets.
- Make earth conductor connection.
- Push silicone sleeves over the lines and make electrical connection.
- Insert lamp.
- Insert the opal glass into the luminaire base with sliding bolt glass closure and turn the glass clockwise up to the stop.
The sliding-bolt closure
- The sliding-bolt closure provides a safe and vibration-resistant holding of glass.
- Place glass to the base plate and observe that the holding springbolts fit into the notches of the glass.
- Turn the glass clockwise until it is locked.
- Thus, you reach a safe and vibrationresistant holding of the glass.
- To release the glass from the base plate, turn it counter-clockwise.
Maintenance
Relamping /Maintenance
- Disconnect the electrical installation.
- Take off glass from housing.
- Clean luminaire and glass.
- Use only solvent-free cleansers.
- Change the lamp.
- Insert glass into housing.
Spares
- Spare glass: 11 002 123 .0R G
- LED lamp 2700 K: 13 552
- LED lamp 3000 K: 13 594
- Lampholder: 63 000 051
BEGA Gantenbrink-Leuchten KG
- Postfach 31 60 · 58689 Menden
- info@bega.com
- www.bega.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>