BEGA 50183.6 LED Ceiling Luminaire Instruction Manual

BEGA 50183.6 LED Ceiling Luminaire

Product Information

Product Usage Instructions

The installation and operation of this luminaire should be done in accordance with national safety regulations. Only a qualified electrician should perform the installation and commissioning. The manufacturer does not accept liability for any damage caused by improper use or installation. If modifications are made to the luminaire, the person responsible for these modifications will be considered the manufacturer.
To use the product:

1. Ensure that the installation is carried out by a qualified electrician.
2. Follow the national safety regulations during installation and operation.
3. Do not make any modifications to the luminaire without proper authorization.
4. Refer to the model number (50 183.6 K3) and module designation (LED-0623/930) for identification purposes.
5. The colour temperature is 3000 K, providing warm white light.
6. The colour rendering index (CRI) is greater than 90, indicating excellent color reproduction.
7. The module luminous flux is 1135 lm, while the luminaire luminous flux is 363 lm.
8. The luminaire luminous efficiency is 34.2 lm / W, indicating high energy efficiency.
9. The lamp module connected wattage is 8.9 W, and the luminaire connected wattage is 10.6 W.
10. The rated temperature range is 25 – 40°C.
11. The ambient temperature should be within the specified limits (ta / ta max).
    For additional lighting design data and spare parts information, please visit the BEGA website at www.bega.com.

DIMENSION

Application

• Ceiling luminaire · indoor luminaire with aluminium housing for non-glare light deflected downwards.
• The used LED technique offers durability and optimal light output with low power consumption at the same time.

Product description

• Ceiling luminaire »STUDIO LINE«
• Aluminium housing shield,
• Finish Colour velvet black inside hue matt copper
• Light-diffusing silicone lens
• Mounting plate with 2 fixing holes ø 4.5 mm · 80 mm spacing
• Connecting terminals 2.5@
• Earth conductor connection
• LED power supply unit
• 220-240 V x 0/50-60 Hz
• DC 176-280 V
• Safety class I
• r – Safety mark
• c  – Conformity mark
• Weight: 0.45 kg
• This product contains light sources of energy efficiency class(es) E

Safety

• The installation and operation of this luminaire are subject to national safety regulations. Installation and commissioning may only be carried out by a qualified electrician.
• The manufacturer accepts no liability for damage caused by improper use or installation. If subsequent modifications are made to  the luminaire, the person responsible for these modifications shall be considered the manufacturer.

PRODUCT SPECIFICATION

• Lamp
  • Module connected wattage 8.9 W
  • Luminaire connected wattage 10.6 W
  • Rated temperature ta = 25 °C
  • Ambient temperature ta max = 40 °C
• 50 183.6 K3
  • Module designation LED-0623/930
  • Colour temperature 3000 K
  • Colour rendering index CRI > 90
  • Module luminous flux 1135 lm
  • Luminaire luminous flux * 363 lm
  • Luminaire luminous efficiency * 34,2 lm / W

Lighting technology

Luminaire data for the DIALux lighting design program for outdoor lighting, street lighting and indoor lighting, as well as luminaire data in EULUMDAT and IES format are available on the BEGA website at www.bega.com.

Installation

• LED are high-quality electronic components! Please avoid touching the light output opening of the LED directly during installation or relamping.
• Pull off LED cover from mounting plate.
• Pass the power connecting cable through the cable entry in the mounting plate. Fasten the mounting plate with the supplied fastening material or other suitable fastening material to the installation surface.
• Make the earth conductor connection and the electrical connection to the terminals.
• Clip LED cover onto mounting plate.
• Pass the enclosed housing shield over the LED cover until the housing shield latches in place audibly.

Cleaning · Maintenance

• Clean luminaire regularly with solvent-free cleansers from dirt.

Replacement of the LED module

• The designation of the LED module is noted on a label in the luminaire.
• The light colour and light output of BEGA replacement modules correspond to those of the modules originally fitted.
• The module can be replaced by qualified persons using standard tools.
• Disconnect the system.
• Pull housing shield off the mounting plate. Open the luminaire.
• Please follow the installation instructions for the LED module. Close the luminaire.
• Pass the housing shield with its inner groove to the front over the LED cover until the housing shield latches in place audibly.

Spares

• Shield 42 000 029 .1L 7
• LED power supply unit DEV-0136/500
• LED module 3000 K LED-0623/930

References

• BEGA · Das gute Licht.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>