MEAN WELL XLG-25 25W Constant Power Mode LED Driver User Manual

XLG-25 25W Constant Power Mode LED Driver

25W Constant Power Mode LED Driverhttp://www.meanwell.com.cn/Upload/PDF/LED_EN.pdf

Features

• Constant Power mode output
• Metal housing design with functional Ground
• Built-in active PFC function
• Class 2 power unit
• No load / Standby power consumption <0.5W
• IP67 rating for indoor or outdoor installations
• Function options: output adjustable via potentiometer  3 in 1 dimming function (Dim to off and Isolation design)
• Typical lifetime>50000 hours
• 5 years warranty

Applications

• LED street lighting
• LED architectural lighting
• LED bay lighting
• LED floodlighting
• Type “HL” for use in Class I, Division 2 hazardous (Classified) location.

GTIN CODE

• MW Search: https:!;www.meanwell.com’serviceGTIN aspx

Description

XLG-25 series is a25W AC/DC LED driver featuring the constant power mode output. XLG-25 operates from 90~305VAC. Thanks to the high efficiency up to 88%, The entire series is able to operate between -40C ~85C wide case temperature range with air convection. The design of metal housing and Ip67 ingress protection level allows this series to fit both indoor and outdoor applications.XLG-25 is equipped with various function options, such as dimming methodologies, so as to provide the optimal design flexibility for LED lighting system.XLG-25 series comply with the latest version of 1EC61347/GB7000.1 -2015 and UL8750 international safety regulations. The output and dimming circuit are also completely in accordance with the new regulations with isolation to ensure the safety of both user and luminaire system during installation.

Model Encoding

Note: lndia version needs MOQ for production, please consult MEANWELL for detail

SPECIFICATION

25W
CURRENT RIPPLE| 5.0% max. @rated current
OPEN CIRCUIT VOLTAGE (max.)| 57V
CURRENT ADJ. RANGE| 0.25 ~ 1.05A
SETUP, RISE TIME       Note.3| 500ms, 100ms/115VAC, 230VAC
INPUT| VOLTAGE RANGE      Note.4| 90 ~ 305VAC
127 ~ 431VDC
(Please refer to “STATIC CHARACTERISTIC” section)
FREQUENCY RANGE| 47 ~ 63Hz
POWER FACTOR| PF≧0.97/115VAC, PF≧0.95/230VAC, PF≧0.92/277VAC@full load
(Please refer to “POWER FACTOR (PF) CHARACTERISTIC” section)
TOTAL HARMONIC DISTORTION| THD< 10%(@load¾50%/115VC,230VAC; @load¾75%/277VAC)
(Please refer to “TOTAL HARMONIC DISTORTION(THD)” section)
EFFICIENCY (Typ.)    Note.10| 88%
AC CURRENT| 0.29A / 115VAC  0.15A / 230VAC  0.13A/277VAC
INRUSH CURRENT(Typ.)| COLD START 50A(twidth=350μs measured at 50% Ipeak) at 230VAC; Per NEMA 410
MAX. No. of PSUs on 16A CIRCUIT BREAKER| 5 units (circuit breaker of type B) / 8 units (circuit breaker of type C) at 230VAC
LEAKAGE CURRENT| <0.75mA / 277VAC
NO LOAD / STANDBY POWER CONSUMPTION| No load power consumption <0.5W for A,<0.75W for I series Standby power consumption <0.5W for AB-Type(Dimming OFF)
PROTECTION| OVER POWER| 110-150% Over Power Protection, recovers automatically after fault condition is removed
OVER CURRENT| Constant current limiting, recovers automatically after fault condition is removed
SHORT CIRCUIT| Constant current limiting, recovers automatically after fault condition is removed
OVER TEMPERATURE| Hiccup mode, recovers automatically after fault condition is removed
INPUT OVER VOLTAGE Note.8| 320 ~ 370VAC (Shut down output voltage when the input voltage exceeds protection voltage,recovers automatically after fault condition is removed)
Can survive input voltage stress of 440Vac for 48 hours @ tc 75℃ max
ENVIRONMENT| WORKING TEMP.| Tcase=-40 ~ +85℃ (Please refer to “ OUTPUT LOAD vs TEMPERATURE” section)
MAX. CASE TEMP.| Tcase=+85℃
WORKING HUMIDITY| 20 ~ 95% RH non-condensing
STORAGE TEMP.| -40 ~ +80℃
TEMP. COEFFICIENT| ±0.03%/℃ (0 ~ 60℃)
VIBRATION| 10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes
SAFETY & EMC|

SAFETY STANDARDS Note.8

| UL8750(type”HL”), CSA C22.2 No. 250.13-12; ENEC AS/NZS IEC BS EN/EN61347-1, AS/NZS BS EN/EN61347-2-13 independent, BS EN/EN62384; IP67; GB19510.1,GB19510.14, EAC TP TC 004,J61347-1(H29), J61347-2-13(H29),KC61347-1,KC61347-2-13,IS15885(Part2/Sec13)( for XLG-25I type only); NOM-058-SCFI-2017 approved
WITHSTAND VOLTAGE| I/P-O/P:3.75KVAC  I/P-FG:2.0KVAC  O/P-FG:1.5KVAC
ISOLATION RESISTANCE| I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH
EMC EMISSION| Parameter| Standard| Test Level/Note
Conducted| BS EN/EN55015(CISPR15) ,GB/T17743| —–
Radiated| BS EN/EN55015(CISPR15) ,GB/T17743| —–
Harmonic Current| BS EN/EN61000-3-2 ,GB/T17625.1| Class C @load≥50%
Voltage Flicker| BS EN/EN61000-3-3| —–
EMC IMMUNITY| BS EN/EN61547
Parameter| Standard| Test Level/Note
ESD| BS EN/EN61000-4-2| Level 3, 8KV air ; Level 2, 4KV contact
Radiated| BS EN/EN61000-4-3| Level 3
EFT/Burst| BS EN/EN61000-4-4| Level 3
Surge| BS EN/EN61000-4-5| 4KV/Line-Line 6KV/Line-Earth
Conducted| BS EN/EN61000-4-6| Level 3
Magnetic Field| BS EN/EN61000-4-8| Level 4
Voltage Dips and Interruptions| BS EN/EN61000-4-11| >95% dip 0.5 periods, 30% dip 25 periods,

95% interruptions 250 periods

OTHERS| MTBF| 3931.6 K hrs min. Telcordia SR-332 (Bellcore)       399.9Khrs min.  MIL-HDBK-217F (25℃)
DIMENSION| 1056330mm (LWH)
PACKING| 0.41Kg;24pcs/ 10.5Kg/0.68CUFT for A-type  0.42Kg;24pcs/ 11Kg/0.68CUFT for AB-type

NOTE

1. All parameters NOT specially mentioned are measured at 230VAC input, rated current and 25℃ of ambient temperature.
2. Please refer to “DRIVING METHODS OF LED MODULE”.
3. Length of set up time is measured at first cold Turning ON/OFF the driver may lead to increase of the set up time.
4. De-rating may be needed under low input Please refer to “STATIC CHARACTERISTIC” sections for details.
5. The driver is considered as a component that will be operated in combination with final Since EMC performance will be affected by the complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again.
6. This series meets the typical life expectancy of >50,000 hours of operation when Tcase, particularly tc point (or TMP, per DLC), is about 80℃ or less.
7. Please refer to the warranty statement on MEAN WELL’s website at http://www.meanwell.com
8. Input over voltage only for XLG-25 I series ,and I series without UL/CSA certificate.
9. The ambient temperature derating of 5℃/1000m with fanless models and of 5℃/1000m with fan models for operating altitude higher than 2000m(6500ft).
10. Only for XLG-25-A
11. Products sourced from the Americas regions may not have the CCC/PSE/BIS/KC Please contact your MEAN WELL sales for more information.
12. For any application note and IP water proof function installation caution, please refer our user manual before https://www.meanwell.com/Upload/PDF/LED_EN.pdf
13. Ripple & noise are measured at 20MHz of bandwidth by using a 12″ twisted pair-wire terminated with a 1uf & 47uf parallel capacitor.
14. To fulfill requirements of the latest ErP regulation for lighting fixture, this LED driver can only be used behind a switch without permanently connected to the mains.
15. If you need the NOM (Mexico) certificate, Please contact MEAN WELL sales representative for details.

Block Diagram

DRIVING METHODS OF LED MODULE  

DIMMING OPERATION

※ 3 in 1 dimming function (for AB-Type)

• Output constant current level can be adjusted by applying one of the three methodologies between DIM+ and DIM-:
• 0 ~ 10VDC, or 10V PWM signal or resistance.
• Direct connecting to LEDs is suggested. It is not suitable to be used with additional drivers.
• Dimming source current from power supply: 100 A (typ.)

◎Applying additive 0 ~ 10VDC
◎ Applying additive 10V PWM signal (frequency range 100Hz ~ 3KHz):◎ Applying additive resistance:

Note :

1. Min. dimming level is about 8% and the output current is not defined when 0%< Iout<8%.
2. The output current could drop down to 0% when dimming input is about 0kΩ or 0Vdc, or 10V PWM signal with 0% duty cycle.

OUTPUT LOAD vs TEMPERATURE

STATIC CHARACTERISTIC

POWER FACTOR (PF) CHARACTERISTIC

TOTAL HARMONIC DISTORTION (THD)

EFFICIENCY vs LOAD

XLG-25 series possess superior working efficiency that up to 88% can be reached in field applications.
※ 50V Model, Tcase at 75℃

LIFE TIME

Mechanical Specification

Installation Manual
Please refer to : http://www.meanwell.com/manual.html

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>