MiBOXER P1 Smart Panel Controller User Manual

MiBOXER® P1 / P2 / P3 Smart Panel Controller User Manual

Introduction

Smart panel controller is a newly high-end controller. The appearance is made of a pretty and fashionable glass panels. And we adopt a high precision capacitive touch screen IC. Touch screen is very stable. Also it has memory function (Turn off the light, then turn on again, The lamps will keep the same light as before). This controller widely work on single color, CCT, RGB, RGBW and RGB+CCT LED strip. Also work on flexible strip, panel light, rolling strip. Easily install and operate.

Parameters

Product Function

P1 Button Function

| ON / OFF switching. When the light is ON, indicating lamp will not light, when the light is OFF, indicating lamp will light.
---|---
|

1. When the light is ON, Press “ ”, the light will be off automatically after 60 seconds.
2. When light is OFF, long press 5 seconds to turn ON the indicating sound.

|

1. Press mode shortly, switch to next mode. 9 modes switching. Long press “ Mode ”, switch to white light mode.
2. When light is OFF, Long press 5 seconds to turn OFF the indicating sound.

| Touch dimming slider to change the brightness from 0.1~100%.

P2 Button Function

| ON / OFF switching. When the light is ON, indicating lamp will not light, when the light is OFF, indicating lamp will light.
---|---
| When the light is ON, press “ ”, the light will be off automatically after 60 seconds.
Mode| Press mode shortly, switch to next mode; 9 modes switching. Long press “ Mode ”, switch to white light mode.
| Touch dimming slider to change the brightness from 0.1~100%.
| Touch CCT slider, change the color Temperature from 2700-6500K.
Save1|

1. Press “ Save1 ” shortly, select save1 mode; long press “ Save1 ”, save present mode to save1.
2. When light is OFF, long press 5 seconds to turn OFF the indicating sound.

Save2|

1. Press “ Save2 ” shortly, select save2 mode; long press “ Save2 ”, save present mode to save2.
2. When light is OFF, long press 5 seconds to turn ON the 0242-5 indicating sound.

P3 Function

This controller is compatible with RGB,RGBW and RGB+CCT version. It will be RGBW version when you get it first time.

Method of Switching RGB, RGBW and RGB+CCT version

1. When the light is OFF, long press “ Mode ” and “ W ” button at the same time, the controller will sound 3 times after 5 seconds, then it change to RGB version.
2. When the light is OFF, long press “ W ” and “ ” button at the same time, the controller will sound 4 times after 5 seconds, then it change to RGBW version.
3. When the light is OFF, long press “ Mode ” and “ ” button at the sametime, the controller will sound 5 times after 5 seconds, then it change to RGB+CCT version.

Button Function

| ON / OFF switching. When the light is ON, indicating lamp will not light, when the light is OFF, indicating lamp will light.
---|---
W| Press “ W ”, switch to static white light mode.
| When the light is ON, press “ ”, the light will be off automatically after 60 seconds.
| Touch color ring, choose the color you want.
| Touch dimming slider to change the brightness from 0.1~100%.
| Each modes have their own brightness value and saturation value ( Static white light mode and dynamic white light gradual changing mode have no saturation ) function see details for P3 sheet.
Mode|

1. Press “ Mode ” shortly, switch to next mode; long press “ Mode ”, switch the modes circularly, there are 12 kind modes. (PS, on the color light, press mode, it will get to first mode).
2. In the version of RGB+CCT, white gradual changing mode means CCT gradual changing under static white mode.

S-|

1. Slow the speed on present dynamic mode. There is 9 class speed. Long press “ S- ”, slow the speed continuously. When it get to slowest speed, “ S- ” will be invalid. (Dynamic mode see details for P3 mode sheet.)
2. When light is OFF, long press 5 seconds to turn OFF the indicating sound.

S+|

1. Accelerate the speed on present dynamic mode. There is 9 class speed. Long press “ S+ ”, accelerate the speed continuously. When it get to fastest speed, “ S+ ” will be invalid. (Dynamic mode see details for P3 mode sheet.)
2. When light is OFF, long press 5 seconds to turn ON the indicating sound.

P1 / P2 / P3 Mode sheet

Installation / Dismantlement

Attention:

1. Please check whether the input voltage of the constant voltage power supply is in accordance with the controller, and please check the connection of both the cathode and anode.
2. The working voltage is DC12-24V, the controller will be broken if the voltage is higher than 24V.
3. When installation, pls handle with care to avoid the broken of the glass panel.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>