CALCINI PUNCH 3 Wireless Earbuds User Manual

CALCINI PUNCH 3 Wireless Earbuds

PACKAGE CONTENTS

• 1 x Charging Cose
• lx USB-C Coble
• 1 x User Manual
• 2x Ear Cap
• A Pair of Earbuds
  

OVERVIEW

CHARGING

1. Charging earbuds
   Put earbuds back to charging case a nd colse the charging case, earbuds white indicator will flashing
   

2. Charging case
   Plug in the coble to the Charing case port, white indicator will fleshing
   

SWITCH CONTROL

Turn On

• Take the earbuds out of the charging case Or press the touch panel on earbud for 6s
  

Tum Off

• Return the earbuds to the charging case and close the lid Or touch and hold the earbuds touch panel for 6s !when both earbuds o re used, it cannot be turned off when acting on one earbud)
  

EARBUDS PAIRING

Open the charging case lid, then toke earbuds out of the case. white indicator flashing means earbuds power on and enter the pairing mode

Once connecting your device successfully first time, earbuds reconnect your device automatically when you take them out of the charging case again

DEVICE CONNECTING

1. Turn on the Bluetooth on your device

2. Take earbuds out of charging case
   

3. Select “Co1ogni P3” from the list of available devices
   

Once connecting your device successfully first time, earbuds reconnect your device automatically when you take them out of the charging case again

DEVICE CHANGING

1. Touch and hold the both earbuds for 10., earbuds will disconnect from previous device
2. Select the ‘ Cotogni P31 from your new devices Bluetooth list
   

MUSIC

• Double top the L / R earbud

• Touch and hold the L earbud for 2s

• Touch and hold the R earbud for 2s

VOLUME

• Triple top the L earbud

• Triple top the R earbud

CALLS

• Answer/ Hang Up Calls
  Double tap 1/R earbud

• Reject Calls
  Touch and hold l/R for 2s
  

CONTROLS & LED INDICATORS

Earbuds

Charging Case

SPECIFICATIONS

Earbuds

Charging Case

ATTENTION

1. You need toke earbuds out of the charging case then them will power on. It will power off after it be backed into the charging case and dose the lid.
2. Please take the earbuds out of the charging case before connecting to the phone.
3. once it connected device successfully first time, earbuds will conned your device automictically after you toke them out of the charging case next time.
4. Before to connect the new device, you should turn off the previous connected device’s Bluetooth or forget the pairing data.
5. When earbuds charging, please dose the charging case lid.
6. Keep away from corrosive liquid and fire source.
7. When the earbuds can’t be charged normally, please try to manually return the earbuds to the correct position in charging case.
8. Each earbud jus1 control itself separately. Each earbud can be used individually.

FCC WARNING STATEMENT

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for o Class B digital device, pursuant to Port 15 of the FCC Rules. These limits ore designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy. If not installed a nd used in accordance with the instruction may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in o particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following.

MEASURES

• Reorient or re locate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Conned the equipment into an outlet on a circuit different from that to which the receiver is connected .
• Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference
2. This device must accept any interference received, including interference that may cause undesired operation. The device has been evaluated to meet general RF exposure requirement.

Contact Us

[email protected] I [email protected]

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>