ZTE MF289F Wireless Router User Manual

ZTE MF289F Wireless Router

Prepare

• Avalid nano-SIM card.
• View the label on your device to get the default information. The following figure is for your reference only.

Insert the nano sim card

Open the slot cover at the bottom of the device and insert the nano-SIM card.

Power on Youur Device

Connect the power adapter to your device and then your device will be powered on and connected to the Internet automaticaly

Access the Internet

Wi-Fi :Get the default WLAN SSID aand WLAN key((password) on the label he label Wi-Fi network with your mobile  your mobile device, and the access the Internet

Network cable(RJ45) :Connect with the computervia port WAN/LAN1 or LAN2 and access the Internet.

Change your device Settings

You can change the device settings by logging in to the 4G CPE web page.

1.  View the label on your device to get the default Device Manager Website IP address and Website Password.
2.  Launch the Internet browser and enter the device Manager Website IP address in the address bar.
3.  Input the Website Password and then click Login.
4.  After the 4G CPE web page is opened, you can change the Wi-Fi SSID, password or other settings.

Cable broadband Mode

Your device supports the cable and mode and you can use this service from your service provider to access the Internet.

1.  Connect the WAN/LANN1 port and the broadband service network port with a network cable.
2.  Log in tto the 4G CPE web page.
3. Change the operation mode to Cable Broadband MoDE
4.  Set the detailed parameters given by your service provider.
5. Use your clients to acccess the Internet.

Mesh Network Function

Your device supports the mesh network function. You can use your device and other devices of the same model to form a larger range of Wi-Fi network in your house, and ensure seamless Wi-Fi roaming when you move.

Telephone Function

Your device supports the telephone function. Before using the telephone Your device supports the WPS function. You can use this function to connect a function, you need to insert the nano-SIM card and connect the telephone. To make a call .

1. Pick up the
2. Dial the telephone
3. Wait for the call to be

WPS Function

Your device supports the WPS function. You can use this function to connect a client to your device.

1.  Press and hold the WPS button for about 5 seconds to activate the WPS function.
2.  Enable the WPS function on your client.
3.  Follow the system prompts on your client to establish the connection.

Indicator Lights and Interfaces

1. POWER White on: Power is on and external power supply is working
   Off: Power is off.

2. WIFI White on:

3.  Wi-Fi works normally withon data

4. Mesh network works White blinking(slowly):

5. Wi-Fi works normally with data

6. The mesh network function is enabled and the mesh network isn’t created.

7. The mesh network is created White blinking(fast):

8. WPS is

9. The mesh network is being Off: Wi-Fi is off.

10. NETWORK Red on:The device is in error

11. The device isnot registered to the mobile

12. There is no nano-SIM card

13. There is no network service

Troubleshooting

Internet Related Problems

Warning and Notice

Safety Precautions

•  Some electronic devices may be susceptible to electromagnetic interference. Locate the device away from TV set, radio and other electronic equipment to avoid electromagnetic interference.
•  The device may interfere with medical devices like hearing aids and pacemakers. Consult a physician or the manufacturer of the medical device before using it.
•  Please keep yourself at least 20 centimeters away from your device.
•  Do not use your device in dangerous environments such as oil terminals or chemical factories where there are explosive gases or explosive products being processed.
•  Please use original accessories or accessories that are authorized by ZTE. Unauthorized accessories may affect the device performance, damage the device or cause danger to you.
•  Do not attempt to dismantle the device. There are no user-serviceable parts.
•  Do not allow the device or accessories to come into contact with liquid or moisture at any time. Do not immerse the device in any liquid.
•  Do not place objects on top of the device. This may lead to overheating of the device.
•  The device must be placed in an awell-ventilated environment for use.
•  Do not expose the device to direct sunlight or store it in hot areas. High temperatures can shorten the life of electronic devices.
•  Do not allow children to play with the device or power adapter.
•  The device is for indoor use only. Do not use the device outside.
•  For pluggable equipment, the socket outlet shall be installed near the equipment and shall be easily accessible.

Cleaning and Maintaining

• Use an antistatic cloth to clean the device. Do not use chemical or abrasive cleanser as these could damage the plastic case. Turn off your device before you clean it.
•  Use the device within the temperature range of -20℃~+55℃, and the storage temperature range is -40℃~+70℃. The humidity range is 5%~95%.
•  Do not use your device during a thunderstorm. Remove the mains power pack from the wall socket.

Limited Warranty

This warranty does not apply to defects or errors in the product caused by:

1.  Reasonable abrasion.
2.  End users’ failure to follow ZTE’s installation, operation or maintenance instructions or procedures.
3.  End users’ mishandling, misuse, negligence, or improper installation, disassembly, storage, servicing or operation of the product.
4.  Modifications or repairs not provided by ZTE or a ZTE-certified individual.
5.  Power failures, surges, fire, flood, accidents, and actions of third parties or other events outside ZTE’s reasonable control.
6.  Usage of third-party products or usage in conjunction with third-party products if such defects are due to the combined usage.
7.  Any other cause beyond the range of normal usage intended for the product.
   End users have no right to reject or return the product, or receive a refund for the product from ZTE under the above-mentioned situations.
   This warranty is end users’ sole remedy and ZTE’s sole liability for defective or nonconforming items, and is in lieu of all other warranties, expressed, implied or statutory, including but not limited to the implied warranties of merchantability and fitness for a particular purpose, unless otherwise required under the mandatory provisions of the law.

Limitation of Liability
ZTE shall not be liable for any loss of profits or indirect, special, incidental or consequential damages resulting from or arising out of or in connection with using of this product, no matter whether or not ZTE had been advised, knew or should have known of the possibility of such damages, including, but not limited to lost profits, interruption of business, cost of capital, cost of substitute facilities or product, or any downtime cost.

FCC Regulations

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiated radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution : Changes or modifications not expressly approved by the party responsible for compliance could void the user‘s authority to operate the equipment

Radio Frequency (RF) Exposure
Your device contains a transmitter and a receiver. When it is ON, it receives and transmits RF energy. When you communicate with your device, the system handling your connection controls the power level at which your device transmits. Important safety information regarding radiofrequency radiation (RF) exposure. To ensure compliance with RF exposure guidelines the device must be used with a separation from the body. Failure to observe these instructions could result in your RF exposure exceeding the relevant guideline limits.The transmitter is using external antenna that operate at 20cm or more from nearby persons.The FCC grant can be found under the Display Grant section of http://www.fcc.gov/oet/fccid after searching on FCC ID: SRQ-MF289F.

IC Notice
This radio transmitter (identify the device by certification number, or model number if Category II) has been approved by Industry Canada to operate with the antenna types listed below with the maximum permissible gain and required antenna impedance for each antenna type indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device. Immediately following the above notice, the manufacturer shall provide a list of all antenna types approved for use with the transmitter, indicating the maximum permission antenna gain (in dBi) and required impedance for each. This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:

1. this device may not cause interference, and
2. this device must accept any interference, including interference that may cause undesired operation of the

This Class B digital apparatus complies with Canadian ICES-003. IC: 5200E- MF289F

IC Radiation Exposure Statement
This device complies with IC radiation exposure limits set forth for an uncontrolled environment. In order to avoid the possibility of exceeding the IC radio frequency exposure limits, human proximity to the antenna shall not be less than 20cm (8 inches) during normal operation.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>