BEGA 50964.1K3 Track Spotlight Instructions
- June 12, 2024
- BEGA
Table of Contents
BEGA 50964.1K3 Track Spotlight
Product Information
This product is a luminaire that requires installation and operation in accordance with national safety regulations. It isrecommended to have a qualified electrician carry out theinstallation and commissioning. The manufacturer does not accept liability for damage caused by improper use or installation. Theluminaire is equipped with electronic components that are protected against overvoltage according to DIN EN 61547. Additional overvoltage protection components are recommended for further protection.The product includes different modules with varyingspecifications. The module designations are K3 and K4. The K3 module has a colour temperature of 3000 K, a colour rendering index (CRI) greater than 90, a module luminous flux of 1685 lm, a luminaire luminous flux of 1296 lm, and a luminaire luminous efficiency of 89.4 lm/W. The K4 module has a colour temperature of 4000 K, a CRI greater than 90, a module luminous flux of 1710 lm, a luminaire luminous flux of 1315 lm, and a luminaire luminous efficiency of 90.7 lm/W.The product also includes spare parts such as an LED power supply unit, LED modules with colour temperatures of 3000 K and 4000 K, a reflector, and a glass/trim ring. These spare parts canbe identified by their corresponding part numbers: DEV-0437/350,LED-0986/930, LED-0986/940, 75 003 702, and 75 003 796.
Product Usage Instructions
- Screw the enclosed trim ring with the attached reflector into the luminaire housing by turning it clockwise until it stops. Ensure that it is fixed securely by clamping.
- Place the surface washer adapter flush on the conductor rail in the desired position.
- Push the two fixing levers on the underside of the adapter to the right until they click into their end position.
- Set the desired LED beam direction by turning and tilting the luminaire housing.
- To unlock the adapter, move the two fixing levers in opposite directions until they disengage.
Dimension
Instructions for use
Application
Ceiling mounted track spotlight · indoor luminaire for 3-phase Eurostandard-
Plus® track systems.The optical system of the washer is swivel-mounted and
rotatable. Symmetrical narrow beam light distribution.With BEGA Hybrid Optics®
: Highly efficient and low-loss light distribution, thanks to reflector and
optical lens.
Product description
Track spotlight with adapterCast aluminium luminaire housing, finish Colour
velvet white, Polycarbonate track adapter with integrated LED power supply
unit Trim ring · Chrome finish Clear safety glass Optical silicone lens · BEGA
Hybrid Optics® Reflector surface made of pure aluminium LED power supply unit
220-240 V y 50/60 Hz DALI-controllable Basic insulation is provided between
the mainsand control cables Safety class II 2 Impact strength IK07 Protection
against mechanical impacts < 2 joule c – Conformity mark Weight: 0.9 kgThis
product contains light sources of energy efficiency class(es) E
Safety
The installation and operation of this luminaire are subject to national
safety regulations. Installation and commissioning may only be carried out by
a qualified electrician. The manufacturer accepts no liability for damage
caused by improper use or installation. If subsequent modifications are made
to the luminaire, the person responsible for these modifications shall be
considered the manufacturer.
Overvoltage protection
The electronic components installed in the luminaire are protected against
overvoltage in accordance with DIN EN 61547. To achieve an additional
protection against e. g. transients, etc. we recommend separateovervoltage
protection components. You can find them on our website at
www.bega.com.
- Lamp
- Module connected wattage 12.3 W
- Luminaire connected wattage 14.5 W
- Rated temperature ta = 25 °C
- Ambient temperature ta max = 60 °C
- 50 964.1 K3
- Module designation LED-0986/930
- Colour temperature 3000 K
- Colour rendering index CRI > 90
- Module luminous flux 1685 lm
- Luminaire luminous flux 1296 lm
- Luminaire luminous efficiency 89,4 lm / W
- 50 964.1 K4
- Module designation LED-0986/940
- Colour temperature 4000 K
- Colour rendering index CRI > 90
- Module luminous flux 1710 lm
- Luminaire luminous flux 1315 lm
- Luminaire luminous efficiency 90,7 lm / W
Light technique
Track spot · surface washer with adjustable optical system. Optical system
0-60° swivel-mounted and infinitely rotatable 360° around the vertical
luminaire axis. Symmetrical narrow beam light distribution. Half beam angle
16°
Installation
LED are high-quality electronic components! Please avoid touching the light output opening of the LED directly during installation or relamping. The track spotlight with adapter is ready for operation in 3-phase EUROSTANDARD-PLUS® track systems. The mounting is done without tools in the bus bar.
IMPORTANT:
Ensure that the adapter’s two lateral stays are located on the same side as
the matching guide profile of the track before installing the adapter in the
3-phase EUROSTANDARDPLUS ® track system. To select the phase ( 1 2 3 ) the
turningknob on the rear side of the adapter has to be operated accordingly.
Screw enclosed trim ring with attached reflector into the luminaire housing by
turning it clockwise until it stops, so that it is fixed by clamping. Place
the surface washer adapter flush on the conductor rail in the desired
position. Push the two fixing levers on the underside of the adapter to the
right until they click into their end position. Set the desired LED beam
direction by turning and tilting the luminaire housing. Move the two fixing
levers in opposite directions until they disengage to unlock the adapter.
Cleaning · Maintenance
Clean luminaire regularly with solvent-free cleansers from dirt.
Replacing the LED module
The designation of the LED module is noted on a label in the luminaire. The light colour and light output of BEGA replacement modules correspond to those of the modules originally fitted. The replacement can be carried out by a qualified person using standard tools. Disconnect the system and open the luminaire. Uninstall the reflector. Please follow the installation instructions for theLED module. Install the reflector. Defective glass must be replaced. Close the luminaire.
- Spares
- LED power supply unit DEV-0437/350
- LED module 3000 K LED-0986/930
- LED module 4000 K LED-0986/940
- Reflector 75 003 702
- Glass/Trim ring 75 003 796
BEGA Gantenbrink-Leuchten KG · Postfach 31 60 · 58689 Menden · info@bega.com · www.bega.com