Earbuds S18 Wireless Earphone User Manual
- June 9, 2024
- Earbuds
Table of Contents
S18
User Manual
S18 Wireless Earphone
Please review this manual thoroughly before operating your device. In order to avoid unnecessary injuries, please do not Disassemble this product by yourself, and please use a standard charger.
Product Contains
Product Specification
Driver: 10mm
Support Profile: HFP / AVRCP / A2DP
Earbuds Charging Time: Up to 1.5 Hour
Charging case Charging Time: Up to 1.5 Hours
Working Voltage: 5V
Transmission Range: Up to !Om
Working Temperature: -30′- 70′
Power On / off
- Earbuds will auto power on and connect when you take out earbuds from charging case.
- Earbuds will auto power off and disconnect when you put the earbuds back to charging case.
- 1f you take out earbuds but earbuds don’t power on, please charge the charging case.
- 1f you take out earbuds but earbuds don’t power off, please charge the charging case.
Bluetooth Pairing
Setpl: Please turn on the Bluetooth function on your cellphone/laptop.
Step2: Open the charging case, take out the earbuds, the green lights
flash on earbud.
Step3: Select “S18” on your phone/laptop and connect the device, the
green lights off when you connect successfully
(The earbuds will automatically turn off if not connected the device within 5
minutes.)
Reset Earbuds
lf only one earbud connects to phone / earbuds can not pair together. Please
try to reset earbuds:
Step!: Open the charging case, and take out the earbuds.
Step2: Short press the earbud five times to reset earbuds.
Step3: The red and white light flash quickly and red light off, which
means reset successfully.
Product Wear
Stepl: Take out the earbuds from charging case.
Step2: Put the earbuds on your ears.
Step3: Adjust by twisting the earbuds for comfort and secure.
Product Control
| Play/Pause
Short press the touch button twice
---|---
| NextSong
Long press Right touch button for 2 seconds
| Previous Song
Long press Left touch button for 2 seconds
| Volume Up
Short press Right touch button once
| Volume Down
Short press Left touch button once
| End a Call Short press the button twice
| Voice Assistant
Short press the touch button three times to call voice assistant.
| Answer a Call
Short press the button twice
| Reject Call
Long press the button for 2 seconds
Product Charging
- Put the earbuds back charging case to charging earbuds.
- Plug the USB type-C to charging the charging case.
- The power display will tell you the charging case power and Earbuds
Wireless charging
S18 can also charging the charging case and earbuds by wireless charging,
please use a regular wireless charging pad for charging.
Certification
“This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.” FCC ID: 2A7GB-S18
Safety For You
Do not expose device to liquids, moisture or humidity. It has electronics and
a battery in it.
Neither of them likes getting wet.
Don’t try to disassemble your device. There are no user serviceable parts
inside it. Don’t use abrasive cleaning solvents to clean your device. Wipe
them down with a slightly damp cloth if and when necessary.
Try not to drop your device and keep away from sharp objects such as keys in
your pockets Onlycharge yourdevicem SVUSB ports such as phone chargers and
laptops or PCs.
Remove and clean the ea「buds tips regularly, to ensure that you always enjoy
the best sound possible from your device.
Do not expose device to extremely high or low temperatures as this may damage
the battery or even deform the plastic parts.
Never listen to music at high volumes or you may permanently damage your
hearing.
Don’tthrowyours device in a fire to dispose it. The internal battery may
explode.
Pay attention to your surroundings and never wear any headphones while riding,
driving or walking In traffic. You do not come with any warranty.
FCC Warning
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any inte rference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interferenceto radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The users manual or instruction manual for an intentional or unintentional
radiator shall caution the user that changes or modifications not expressly
approved by the party responsible for compliance could void the user’s
authority to operate the equipment
Radiation Exposure Statement
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>