BEGA 78148.3 Wall Luminaire for Indoor Use Instruction Manual
- June 12, 2024
- BEGA
Table of Contents
BEGA 78148.3 Wall Luminaire for Indoor Use
Product Information
Product Name | Luminaire |
---|---|
Model Number | 78 148.3 |
Luminaire Efficiency | 48% |
Detailed technical and lighting data for the lamps can be found in the data sheets on our website.
Product Usage Instructions
Safety:
- The installation and operation of this luminaire are subject to national safety regulations.
- Installation and commissioning may only be carried out by a qualified electrician.
- The manufacturer accepts no liability for damage caused by improper use or installation.
- If subsequent modifications are made to the luminaire, the person responsible for these modifications shall be considered the manufacturer.
Spares:
Ersatzteile | Part Number |
---|---|
Ersatzglas | 11 002 830 .0R |
LED-Leuchtmittel 2700 K | G 13 552 |
LED-Leuchtmittel 3000 K | G 13 594 |
Fassung | 63 000 051 |
Application
- Wall luminaire · indoor luminaire made of handblown opal glass, satin matt and metal housing, for all lighting tasks in interior applications.
- They are ideal for places where a soft and uniform lighting distribution is required.
- Luminaire with a high protection class.
Lamp Specification
- Luminaire with screw base E 14
- Lamp output max. 4 × 40 W
- This product contains light sources of energy efficiency class E
Supplied lamp
- 4 × BEGA LED lamp 13552
- LED Retrofit 4 W · 470 lm · 2700 K
Supplied lamp
- 4 × BEGA LED lamp 13594
- LED Retrofit 4 W · 470 lm · 3000 K
- Luminaire efficiency: 48%
Detailed technical and lighting data for the lamps can be found in the data sheets on our website.
Product Description
- Die-cast aluminum and aluminum housing, finish Chrome
- Hand-blown opal glass, satin matt
- 2 mounting holes ø 5.5 mm
- Distance apart 350 mm
- 1 cable entry for mains supply cable up to ø 10.5 mm max. 3 x 1.5@
- Connection terminal 2.5@
- Earth conductor connection
- Lampholder E 14
- Safety class I
- Protection class IP 44
- Protected against granular foreign bodies ≥ 1 mm and splash water
- Impact strength IK02
- Protection against mechanical impacts < 0.2 joule
- Safety mark
- Conformity mark
- Weight: 2.0 kg
Safety
- The installation and operation of this luminaire are subject to national safety regulations.
- Installation and commissioning may only be carried out by a qualified electrician.
- The manufacturer accepts no liability for damage caused by improper use or installation.
- If subsequent modifications are made to the luminaire, the person responsible for these modifications shall be considered the manufacturer.
Installation
- Loosen the screw of the lateral cover and take off the glass from the luminaire housing.
- Lead the main supply cable into the luminaire housing.
- Fix the luminaire housing with enclosed or any other suitable fixing material onto the mounting surface.
- It is imperative to use the enclosed gaskets.
- Make an earth conductor connection.
- Push silicone sleeves over the lines and make an electrical connection to the terminals.
- Insert lamp.
- Position the glass into the luminaire housing and fix it with the screw and the cover.
Dimension
Relamping And Maintenance
- Disconnect the electrical installation.
- Take off the glass from luminaire housing.
- Clean luminaire and glass.
- Use only solvent-free cleansers.
- Change the lamp.
- Fix the glass.
Spares
- Spare glass 11 002 830 .0R G
- LED lamp 2700 K 13 552
- LED lamp 3000 K 13 594
- Lampholder 63 000 051
BEGA Gantenbrink-Leuchten KG · Postfach 31 60 · 58689 Menden · info@bega.com · www.bega.com.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>