QIANSON QX3600 Outdoor Portable Power Station User Manual
- June 9, 2024
- QIANSON
Table of Contents
QIANSON QX3600 Outdoor Portable Power Station
Product Overview
This product is a portable power storage product for home and outdoor, with large capacity, small size, light weight, high safety and large output power. Can be quickly split into two small power storage for separate use; Two modules can work alternately to keep the load never power off; multiple output interface to meet all kinds of small household appliances, diversified input mode can be used in a variety of situations power supply; For indoor and outdoor electricity necessary products.
Parameter Specification
Basic parameters
The net weight| 22kg
size| 449x236x336mm
energy| 3600Wh 57.6V
Certification standards| CE ROHs
Wi-fi| Support
GPRS| Support
Output specifications
Ac output ( x4 )| Pure sine , Max3200W , 220V ( S0Hz)
De output| 12V⎓l0A
USB(x4-way output)| 5V⎓3A
Type-C(x2- w ay output)| 5V⎓3A 9V⎓3A 12V⎓3A 15V⎓3A 20V⎓3A (Max)
The input specifications
AC output| AC220V Max3000W
DC output| DC12V DC24V 200W (Max)
Solar energy charging| 12V-40V The most powerful400W
The battery specification
Batteries materials| Solid -s tate lithium – ion
batteries
Shelf life| 1 year ( After the battery is fully charged }
Cycle life| 80% remaining capacity After 1500 cycles
Protection type| High temperature protection, low temperature protection,
over-discharge protection, over-charge protection , overload
protection . Short circuit protection, overcurrent protection
Operating temperature
Optimum ambient temperature| 20°C~30°C
Discharge ambient temperature| -20°C~60°C
Charging ambient temperature| 0°C~60°C
Storage Environment Temperature| -20°C~45°C ( 20°C to 30°C is best)
Novice Guide
Product Appearance
Interface description
Products use
Power on. sleep, standby and power off
-
Power on: press the power switch to turn on the device. After the device is turned on, the display screen enters the power on interface, and the power switch indicator is always on;
-
Sleep: The default sleep time of the product is 15 minutes. If the product is idle for 15 minutes without any operation (the socket switch is turned off), the product will enter the sleep state. At this time. the display screen will enter the statistics interface, and then enter the sleep interface;
-
Stand by: The default standby time of this product is 15 minutes. If the socket switch is not turned on and there is no load connected, it will automatically shut down after 15 minutes;
-
Shutdown: long press the power switch, the display screen will enter the statistical information interface. and then enter the sleep interface;
-
Battery pull- out: under the power on interface, turn off the socket switch, briefly press the power switch twice, enter the battery pull-out selection interface, select the socket switch (confirm),the battery pops up, select the power switch(cancel),the battery does not pop up, and return to the power on interface;
-
Socket opening: when the machine is turned on, press the socket switch briefly once to open the socket;
-
The socket is closed: when the machine is turned on, press the socket switch briefly once, and the socket is closed;
-
Function setting interface:
A During the time period when the power on interface is displayed during the power on process, press the socket switch 4 times continuously to enter the state of the interface with function settings;
B. Press the power switch twice to enter the setting interface. Press the socket switch briefly to select the items to be set;
Note: The factory default is simple interface mode;
Battery Packs Installation and Removal Instructions
-
Press the power switch to start the machine.
-
Double click the power switch to enter the battery pop-up page.
-
Press the socket switch briefly to eject the battery.
220V AC input/output operation
-
Input: Directly plug into 220V power supply to charge.
-
Output: Under the state of power on, press the socket switch and insert the electrical equipment after the button indicator lights up.
Car jack input\output operation
-
Input: When the machine is turned on, plug in the charging plug to start charging.
-
Input :
When the machine is turned on, plug in the charging plug to start charging
Solar energy charging
Users can connect solar panels in series to charge the product as shown in the
figure. The de input voltage range of this product is 12v-40v,the maximum
charging power is 400W.
TYPE-C Output operations
When the machine is turnde on, it can be directly inserted into the electrical
equipment for use.
USB Output operations
When the machine is turnde on, it can be directly inserted into the electrical
equipment for use.
Safe Use Guide
use
- Do not put the product near heat source, such as fire source or heating furnace when it is working.
- Do not let the product touch any liquid. Do not immerse the product in water or make it wet. Do not use this product in rain or wet environment.
- Do not use this product in the environment of strong static electricity or magnetic field.
- It is forbidden to disassemble or prick the product with sharp objects in any way.
- Do not use wires or other metal objects to cause short circuit of the product.
- Do not use non-official parts or accessories. If replacement is required, please go to the official sales channel for relevant purchase information.
- When using this product, please strictly follow the environment temperature specified in this user manual. If the temperature is too high, the battery may fail. If the temperature is too low, the performance of the product will be seriously degraded, and even it cannot meet the requirements of normal use.
- Do not pile other heavy objects on the product.
- It is forbidden to block the fan or keep the product in an unventilated or dusty space during use.
- Please avoid collision, falling and strong vibration. In case of serious external force impact, please immediately turn off the power and stop using. Please fix it to avoid vibration and impact during transportation.
- If the product accidentally falls into water during use, place it in a safe, open area away from the product until the product is completely dry. The dried products shall not be used again and shall be properly disposed of in accordance with the methods described in Section 5.2 Abandonment. In case of fire, use fire extinguishing equipment in the following recommended order: water or water mist, sand, fire blanket. dry powder, and carbon dioxide extinguisher.
- If there is dirt on the interface of this product, please use a dry cloth to wipe it clean.
- Please place the product carefully to prevent damage caused by dumping. If the product is dumped and seriously damaged, shut it down immediately. Place the battery in an open area away from combustibles and people, and discard it according to local laws and regulations.
- Keep the product out of reach of children and pets.
Abandoned
- If conditions permit, discharge the battery completely before placing the product in the specified battery recycling bin. This product contains batteries, batteries are dangerous chemicals, do not waste in the ordinary dustbin. For details, follow the local laws and regulations on battery recycling and disposal.
- If the battery cannot be completely discharged due to the fault of the product itself, do not dispose the battery directly in the battery recycling box. Contact a professional battery recycling company for further treatment.
- If the battery cannot be started after over discharge, press Discard.
After-sales service and support
-
From the date of purchase, the product shall enjoy free maintenance services under the following conditions (1) or (2).
(1) Within 2 year; (2) Within 1500 use cycles; -
Non-warranty coverage :
(1) The product is faulty due to human causes ;
(2) Force Majeure: Product failure caused by natural disasters such as earthquake and fire;
(3) Self-disassembly, repair caused by product failure.
After-sales service card
User Name
|
---|---
Contact Number
|
Purchase date
|
Product model
|
Address of the user
|
Sales Unit
|
Fault Description
|
Error Code List
Error Code I
|
Error code
|
Error description
|
Solution
---|---|---|---
E001
|
A battery overcharge protection
|
Stop charging and wait for automatic recovery
E002
|
A battery overdischarge protection
|
Pause the discharge and plug in the charging plug to charge in time
E003
|
A battery discharge overcurrent protection
|
Stop discharging and wait for automatic recovery
E004
|
A battery charge overcurrent protection
|
Stop charging and wait for automatic recovery
E005
|
A battery discharge overtemperature protection
|
Stop charging and wait for automatic recovery
E006
|
A battery discharge overtemperature protection
|
Stop charging and wait for automatic recovery
E007
|
A battery SOC protection
|
Stop charging and wait for automatic recovery
E008
|
B battery overcharge protection
|
Stop charging and wait for automatic recovery
E009
|
B battery overdischarge protection
|
Pause the discharge and plug in the charging plug to charge in time
E010
|
B battery discharge overcurrent protection
|
Stop discharging and wait for automatic recovery
E011
|
B battery charge overcurrent protection
|
Stop charging and wait for automatic recovery
E012
|
B battery discharge overtemperature protection
|
Stop charging and wait for automatic recovery
E013
|
B battery charge overtemperature protection
|
Stop charging and wait for automatic recovery
£014
|
B battery SOC protection
|
Stop charging and wait for automatic recovery
E015
|
Inverter input short circuit protection
|
Stop using,remove load and charging plug,restart battery
E016
|
Inverter input overload protection
|
Stop using,wait for automatic recovery,reduce the use power
E017
|
Inverter input undervoltage protection
|
Stop using and plug in the charging plug to charge in time
E018
|
Inverter input overvoltage protection
|
Stop charging and wait for automatic recovery
E019
|
Inverter input overtemperature protection
|
Stop charging and wait for automatic recovery
E020
|
LV hardware error
|
Stop usincEremove load and charging pluq,restart battery
E021
|
HC hardware error
|
Stop using,remove load and charging plug,restart battery
E022
|
Inverter communication is abnormal
|
Stop using,remove load and charging plug,restart battery
E023
|
Inverter output overcurrent protection
|
Stop using,wait for automatic recoverweduce the use power
E024
|
Inverter output short circuit protection
|
Stop charging and wait for automatic recovery
E025
|
Inverter output undervoltage protection
|
Stop using,remove load and charging plug,restart battery
E026
|
Inverter DC overvoltage protection
|
Stop charging and wait for automatic recovery
E027
|
Inverter DC undervoltage protection
|
Stop charging and wait for automatic recovery
E028
|
Inverter output zero crossing error
|
Stop using,remove load and charging plug,restart battery
E029
|
Inverter output overtemperature protection
|
Stop charging and wait for automatic recovery
E030
|
Inverter input-output overvoltage
|
Stop charging and wait for automatic recovery
E031
|
Inverter parameter configuration error
|
Stop using,remove load and charging plug,restart battery
E032
|
DC input voltage abnormal
|
Stop usinq,remove load and charging plug,restart battery
E033
|
DC output voltage abnormal
|
Stop using,remove load and charging plug,restart battery
E034
|
Inverter hardware failure
|
Stop using,remove load and charging plug,restart battery
E035
|
A battery sampling abnormality
|
Stop using,remove load and charging plug,restart battery
E036
|
B battery sampling abnormality
|
Stop using,remove load and charging plug,restart battery
E037
|
A battery MOS tube is abnormal
|
Stop using,remove load and charging plug,restart battery
E038
|
B battery MOS tube is abnormal
|
Stop using,remove load and charging plug,restart battery
wool
|
Low battery warning
|
Indicates that the battery is low,it is recommended to charge it in time
W002
|
|
Prompt that the temperature of the internal inverter is high, it is recommended to reduce the power to use at this time
Battery temperature alam(charging 60°C, discharging 65°C)
W003
|
Inverter pre-stage temperature alarm(120°C)
|
Prompt that the temperature of the internal inverter is high, it is recommended to reduce the power to use at this time
W004
|
Inverter post-stage temperature alarm (80°C)
|
Prompt that the temperature of the internal inverter is high, it is recommended to reduce the power to use at this time
W005
|
Full bridge (aluminum cylinder) temperature alam(100°C)
|
Prompt that the temperature of the internal inverter is high, it is recommended to reduce the power to use at this time
Frequently asked questions
What type of battery does the product use ?
This product uses high energy, high safety solid state lithium ion battery.
What equipment can product ac export lake?
The rated power of the AC outlet is 3200W, which can supply power to most household appliances. However, it is recommended that you check the power of the appliance before use and ensure that the sum of the power of all load devices is less than the rated power.
How do you know how long a product will last ?
Thee-ink display displays the remaining time, which can be estimated for electrically stable devices.
How can you tell if a product is charging ?
When charging, the screen will show the remaining charging time, the percentage change of battery power, the change of battery capacity indicator and the input power.
How to clean this product?
Please use a dry, soft, clean cloth or paper towel to wipe the product.
How to store Products ?
When storing, please first turn off the product, and then store it in a dry, ventilated, room temperature environment. Do not place this product near water sources. For long-term storage, it is recommended to discharge the battery to 30% and then charge it to 60% every three months to prolong the service life of the product.
10/5000 Can this product be carried on the plane ?
Can not be.
Is the actual output capacity of the product consistent with the capacity stated in the user manual ?
The capacity specified in the user manual is the rated capacity of the battery pack. Due to the efficiency loss in the charging and discharging process, the actual output capacity of the product is lower than the capacity specified in the user manual.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>