LUCIDE 49046-03-62 PEPIJN Wall Light Instruction Manual

June 12, 2024
LUCIDE

LUCIDE 49046-03-62 PEPIJN Wall Light

LUCIDE-49046-03-62-PEPIJN-Wall-Light-product 

Product Information
Thank you for purchasing a Lucide original! Lucide aims to inspire and illuminate its clients by offering trendy, high-quality, and affordable lighting. Welcome to the community of #illuminatesyourworld. Discover our entire collection on our website and take a look at how others around the world use Lucide products. Follow us for the latest lighting trends!

Recommended Lucide Light Source

  • Dimmable: Yes
  • Included: No
  • Item number: 05228/01/30
  • EAN code: 5411212051110

General Specifications

  • Dimensions LxWxH: 18.5cm x 47cm x 30cm
  • Main material: Steel
  • Ceiling rose material: Steel
  • Color: Black and Matte Gold/Brass
  • Style: Modern
  • Shape: Triangle
  • Weight: 0.90kg

Pepijn Specifications

  • Dimmable: Yes
  • Light direction: Downlight
  • Adjustable in height: Not In Height Adjustable
  • Directional: Not Directional
  • Cable: Yes, Cable With Plug On Product
  • Cable length: 190cm
  • Sensor: Without Sensor
  • Control: Touch Dimmer – On The Product
  • Power supply: Adapter/Power Grid
  • IP-Class: 20
  • Electric Class: 2
  • Number of light sources: 1
  • Lamp socket: E14
  • Maximum wattage: 40W
  • Power requirements: 220-240V~50Hz
  • Warranty: 2 Years

Product Usage Instructions
This Lucide product is only suitable for indoor use, excluding the bathroom (unless a higher IP degree permits bathroom usage). For safety reasons, please respect the minimum distance between the lamp and flammable objects. If the protective glass is damaged or broken, it should be immediately replaced. When disposing of this product, comply with the legislation that requires all electrical and electronic equipment to be collected for reuse and recycling. Electrical and electronic equipment marked with the symbol for separate collection must be returned to a municipal waste collection point. This product falls under Class I, which means it is equipped with grounding. The grounding wire (green-yellow) must be connected to the ground terminal (marked with the symbol). This product is suitable for lower voltage power supply and should not be connected to the grounding wire.

Thank you for purchasing a Lucide original!
This manual will hopefully guide you easily through the installation process. We aim to inspire and illuminate our clients by offering trendy, high-quality, and affordable lighting. Welcome to the community of #illuminatesyourworld

General

  • Dimensions LxWxH: 18,5cm x 47cm x 30cm Main material: Steel
  • Ceiling rose material: Steel
  • Color: Black and Matt Gold / Brass
  • Style: Modern
  • Shape: Triangle
  • Weight: 0,90kg

Specifications

  • Dimmable: Yes
  • Light direction: Downlight
  • Adjustable in height: Not In Height Adjustable Directional: Not Directional
  • Cable: Yes, Cable With Plug On Product Cable length: 190cm
  • Sensor: Without Sensor
  • Control: Touch Dimmer – On The Product Power supply: Adapter/Power Grid
  • IP-Class: 20
  • Electric Class: 2
  • Number of light sources: 1
  • Lamp socket: E14
  • Maximum wattage: 40W
  • Power requirements: 220-240V~50Hz Warranty: 2 Years

PEPIJN

LUCIDE-49046-03-62-PEPIJN-Wall-Light-fig-1LUCIDE-49046-03-62-PEPIJN-Wall-Light-fig-3

Safety Instruction

Please read this notice carefully and keep it during the lifetime of this product. Follow the instructions for a safe and correct installation and functioning of the light fixture. The manufacturer does not accept any responsibility for damage caused by improper installation and service. Installation should always be done by a qualified electrician. Always isolate the power before commencing installation, maintenance, or repair. case of doubts, please contact a qualified electrician. Please pay attention to locations where the item can be installed (indoor, outdoor, bathroom (for outdoor and bathroom installa-tion, please see further). Indoor items cannot be used in humid places. Do not put the item in contact with water or any liquids or inflammable products. Always respect the minimal distance (indicated on the light) to inflammable products. During installation, make sure that the cables will not be squeezed or damaged by sharp edges. If the external flexible cable is damaged, it needs to be replaced exclusively by the manufacturer, his service agent, or a qualified electrician. This is to avoid all risks. Because the temperature of the item and the bulbs can get very high, they must cool down before being touched. Always use the correct bulb (respect type and maximal wattage as indicated on the product).

Explanation of the symbols which can appear on the fixture

This item is only suitable for indoor use, exclusive bathroom (except if a higher IP degree permits that the item can be used in the bathroom).

Legislation requires that all electrical and electronic equipment must be collected for reuse and recycling. Electrical and electronic equipment marked with this symbol indicating a separate collection of such equipment must be returned to a municipal waste collection point.

Class I: The item has an earth connection. The earth wire (green-yellow) needs to be connected to the earth connection (marked with this symbol).

Class II: The item is double insulated and must not be connected to the earth wire.

Class III: The item is only suitable for lower voltage supply and must not be connected to the earth wire.

IP 20: Protection against contact with a finger

If the protection glass is damaged or broken, it needs to be replaced immediately.

Please respect the minimum distance from the bulb to inflammable objects.

Warranty declaration

Lucide NV warrants that the products supplied will be free from defects in material and workmanship for a period of 2 years from the date of purchase by the end user if the item is installed and maintained properly as mentioned in the user manual.

Exclusions for the warranty

  1. Broken glass parts of the fixture will only be replaced within 14 days after purchase by the end user.
  2. Normal wear and tear, and discoloring as a result of normal use.
  3. Damage is caused by external causes like fire, water, wrong use/ installation, or maintenance of the product. For warranty claims, the customer needs to hand over the defective fixture/part and the original purchase ticket.

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals